|
|
Gonzalez-Iglesias, D., Esperante, D., Gimeno, B., Blanch, C., Fuster-Martinez, N., Martinez-Reviriego, P., et al. (2023). Analysis of the Multipactor Effect in an RF Electron Gun Photoinjector. IEEE Trans. Electron Devices, 70(1), 288–295.
Abstract: The objective of this work is the evaluation of the risk of suffering a multipactor discharge within an RF electron gun photoinjector. Photoinjectors are a type of source for intense electron beams, which are the main electron source for synchrotron light sources, such as free-electron lasers. The analyzed device consists of 1.6 cells and it has been designed to operate at the S-band. Besides, around the RF gun there is an emittance compensation solenoid, whose magnetic field prevents the growth of the electron beam emittance, and thus the degradation of the properties of the beam. The multipactor analysis is based on a set of numerical simulations by tracking the trajectories of the electron cloud in the cells of the device. To reach this aim, an in-house multipactor code was developed. Specifically, two different cases were explored: with the emittance compensation solenoid assumed to be off and with the emittance compensation solenoid in operation. For both the cases, multipactor simulations were carried out exploring different RF electric field amplitudes. Moreover, for a better understanding of the multipactor phenomenon, the resonant trajectories of the electrons and the growth rate of the electrons population are investigated.
|
|
|
|
Bayar, M., Ikeno, N., & Oset, E. (2020). Analysis of the psi (4040) and psi (4160) decay into D-(*()) (D)over-bar(()*()), D-s(()*()) (D)over-bar(s)(()*()). Eur. Phys. J. C, 80(3), 222–9pp.
Abstract: We have performed an analysis of the e+e--> D(*) data in the region of the psi(4040) and psi(4160) resonances which have a substantial overlap and require special care. By using the P-3(0) model to relate the different D(*)(D) over bar(*) production modes, we make predictions for production of these channels and compare with experiment and other theoretical approaches. As a side effect we find that these resonances qualify largely as c (c) over bar states and theweight of the meson-meson components in the wave function is very small.
|
|
|
|
Miyagawa, P. S. et al, Bernabeu, P., Lacasta, C., Solaz, C., & Soldevila, U. (2024). Analysis of the results from Quality Control tests performed on ATLAS18 Strip Sensors during on-going production. Nucl. Instrum. Methods Phys. Res. A, 1064, 169457–9pp.
Abstract: The ATLAS experiment will replace its existing Inner Detector with the new all -silicon Inner Tracker (ITk) to cope with the operating conditions of the forthcoming high -luminosity phase of the LHC (HL-LHC). The outer regions of the ITk will be instrumented with similar to 18000 ATLAS18 strip sensors fabricated by Hamamatsu Photonics K.K. (HPK). With the launch of full-scale sensor production in 2021, the ITk strip sensor community has undertaken quality control (QC) testing of these sensors to ensure compliance with mechanical and electrical specifications agreed with HPK. The testing is conducted at seven QC sites on each of the monthly deliveries of similar to 500 sensors. This contribution will give an overview of the QC procedures and analysis; the tests most likely to determine pass/fail for a sensor are IV, long-term leakage current stability, full strip test and visual inspection. The contribution will then present trends in the results and properties following completion of similar to 60% of production testing. It will also mention challenges overcome through collaborative efforts with HPK during the early phases of production. With less than 5% of sensors rejected by QC testing, the overall production quality has been very good.
|
|
|
|
Ramalho, M., Suhonen, J., Kostensalo, J., Alcala, G. A., Algora, A., Fallot, M., et al. (2022). Analysis of the total beta-electron spectrum of( 92)Rb: Implications for the reactor flux anomalies. Phys. Rev. C, 106(2), 024315–7pp.
Abstract: We present here a microscopic nuclear-structure calculation of a beta-electron spectrum including all the beta-decay branches of a high Q-value reactor fission product contributing significantly to the reactor antineutrino energy spectrum. We perform large-scale nuclear shell-model calculations of the total electron spectrum for the beta(-) decay of Rb-92 to states in Sr-92 using a computer cluster. We exploit the beta-branching data of a recent total absorption gamma-ray spectroscopy (TAGS) measurement to determine the effective values of the weak axial-vector coupling, g(A), and the weak axial charge, g(A)(gamma(5)). By using the TAGS data we avoid the bias stemming from the pandemonium effect which is a systematic error biasing the usual beta-decay measurements. We take fully into account all the involved allowed and forbidden beta transitions, in particular the first-forbidden nonunique ones which have earlier been shown to be relevant in the context of the reactor-antineutrino flux anomaly and the unexplained spectral shoulder, the “bump,” the former one having been interpreted as one of the strongest evidence for the existence of sterile neutrinos. Here we are able to present quantitative evidence for the relevance of forbidden nonunique beta(-) decays in a total beta spectrum of a fission product, in this case( 92)Rb, which is one of the major contributors to the total reactor antineutrino spectral shape. We demonstrate that taking the forbidden spectral shapes fully into consideration leads for Rb-92 to a 2.6%-4.6% reduction in the expected inverse beta-decay rate at the reactor antineutrino telescopes. We also confirm by our calculation of a total beta-electron spectrum that the forbidden transitions can contribute to the formation of the spectral bump in the reactor-antineutrino flux profile.
|
|
|
|
Gonzalez-Iglesias, D., Esperante, D., Gimeno, B., Boronat, M., Blanch, C., Fuster-Martinez, N., et al. (2021). Analytical RF Pulse Heating Analysis for High Gradient Accelerating Structures. IEEE Trans. Nucl. Sci., 68(2), 78–91.
Abstract: The main aim of this work is to present a simple method, based on analytical expressions, for obtaining the temperature increase due to the Joule effect inside the metallic walls of an RF accelerating component. This technique relies on solving the 1-D heat-transfer equation for a thick wall, considering that the heat sources inside the wall are the ohmic losses produced by the RF electromagnetic fields penetrating the metal with finite electrical conductivity. Furthermore, it is discussed how the theoretical expressions of this method can be applied to obtain an approximation to the temperature increase in realistic 3-D RF accelerating structures, taking as an example the cavity of an RF electron photoinjector and a traveling wave linac cavity. These theoretical results have been benchmarked with numerical simulations carried out with commercial finite-element method (FEM) software, finding good agreement among them. Besides, the advantage of the analytical method with respect to the numerical simulations is evidenced. In particular, the model could be very useful during the design and optimization phase of RF accelerating structures, where many different combinations of parameters must be analyzed in order to obtain the proper working point of the device, allowing to save time and speed up the process. However, it must be mentioned that the method described in this article is intended to provide a quick approximation to the temperature increase in the device, which of course is not as accurate as the proper 3-D numerical simulations of the component.
|
|
|
|
ATLAS Collaboration(Aaboud, M. et al), Alvarez Piqueras, D., Barranco Navarro, L., Cabrera Urban, S., Castillo Gimenez, V., Cerda Alberich, L., et al. (2018). Angular analysis of B-d(0) -> K* mu(+)mu(-) decays in pp collisions at root s=8 TeV with the ATLAS detector. J. High Energy Phys., 10(10), 047–47pp.
Abstract: An angular analysis of the decay B-d(0) -> K*mu(+)mu(-) is presented, based on proton-proton collision data recorded by the ATLAS experiment at the LHC. The study is using 20.3 fb(-1) of integrated luminosity collected during 2012 at centre-of-mass energy of root s = 8TeV. Measurements of the K* longitudinal polarisation fraction and a set of angular parameters obtained for this decay are presented. The results are compatible with the Standard Model predictions.
|
|
|
|
LHCb Collaboration(Aaij, R. et al), Henry, L., Jashal, B. K., Martinez-Vidal, F., Oyanguren, A., Remon Alepuz, C., et al. (2021). Angular analysis of B0 -> D*- D*s+ with D*s+ -> Ds + gamma decays. J. High Energy Phys., 06(6), 177–30pp.
Abstract: The first full angular analysis of the B0 -> D-Ds+ decay is performed using 6 fb(-1) of pp collision data collected with the LHCb experiment at a centre-of-mass energy of 13 TeV. The Ds+-> Ds+gamma and D*- -> D<overbar></mml:mover>0- vector meson decays are used with the subsequent Ds+ -> K+K-pi (+) and D<overbar></mml:mover>0 -> K+pi (-) decays. All helicity amplitudes and phases are measured, and the longitudinal polarisation fraction is determined to be f(L) = 0.578 +/- 0.010 +/- 0.011 with world-best precision, where the first uncertainty is statistical and the second is systematic. The pattern of helicity amplitude magnitudes is found to align with expectations from quark-helicity conservation in B decays. The ratio of branching fractions [B(B0 -> D-Ds+) x B(Ds+-> Ds+gamma)]/B(B-0 -> D(*-)Ds+) is measured to be 2.045 +/- 0.022 +/- 0.071 with world-best precision. In addition, the first observation of the Cabibbo-suppressed B-s -> D(*-)Ds+ decay is made with a significance of seven standard deviations. The branching fraction ratio B(B-s -> D(*-)Ds<mml:mo>+)/B(B-0 -> D(*-)Ds<mml:mo>+) is measured to be 0.049 +/- 0.006 +/- 0.003 +/- 0.002, where the third uncertainty is due to limited knowledge of the ratio of fragmentation fractions.<fig id=“Figa” position=“anchor”><graphic position=“anchor” specific-use=“HTML” mime-subtype=“JPEG” xmlns:xlink=“http://www.w3.org/1999/xlink” xlink:href=“MediaObjects/13130202116089FigaHTML.jpg” id=“MO1”></graphic
|
|
|
|
LHCb Collaboration(Aaij, R. et al), Jashal, B. K., Martinez-Vidal, F., Oyanguren, A., Remon Alepuz, C., & Ruiz Vidal, J. (2022). Angular Analysis of D0 -> x plus x-mu plus mu- and D0 -> K plus K-mu plus mu- Decays and Search for CP Violation. Phys. Rev. Lett., 128(22), 221801–11pp.
Abstract: The first full angular analysis and an updated measurement of the decay-rate CP asymmetry of the D0→π+π−μ+μ− and D0→K+K−μ+μ− decays are reported. The analysis uses proton-proton collision data collected with the LHCb detector at centre-of-mass energies of 7, 8 and 13 TeV. The data set corresponds to an integrated luminosity of 9 fb−1. The full set of CP-averaged angular observables and their CP asymmetries are measured as a function of the dimuon invariant mass. The results are consistent with expectations from the standard model and with CP symmetry.
|
|
|
|
LHCb Collaboration(Aaij, R. et al), Henry, L., Jashal, B. K., Martinez-Vidal, F., Oyanguren, A., Remon Alepuz, C., et al. (2021). Angular Analysis of the B+ -> K*(+)mu(+) mu(-) Decay. Phys. Rev. Lett., 126(16), 161802–11pp.
Abstract: We present an angular analysis of the B+ -> K*(+)(-> K-S(0)pi(+))mu(+) mu(-) decay using 9 fb(-1) of pp collision data collected with the LHCb experiment. For the first time, the full set of CP-averaged angular observables is measured in intervals of the dimuon invariant mass squared. Local deviations from standard model predictions are observed, similar to those in previous LHCb analyses of the isospin-partner B-0 -> K*(0)mu(+)mu(-) decay. The global tension is dependent on which effective couplings are considered and on the choice of theory nuisance parameters.
|
|
|
|
LHCb Collaboration(Aaij, R. et al), Jashal, B. K., Martinez-Vidal, F., Oyanguren, A., Remon Alepuz, C., & Ruiz Vidal, J. (2021). Angular analysis of the rare decay B-s(0) -> phi mu(+)mu(-). J. High Energy Phys., 11(11), 043–45pp.
Abstract: An angular analysis of the rare decay B-s(0) -> phi mu(+)mu(-) is presented, using proton-proton collision data collected by the LHCb experiment at centre-of-mass energies of 7, 8 and 13TeV, corresponding to an integrated luminosity of 8.4 fb(-1). The observables describing the angular distributions of the decay B-s(0) -> phi mu(+)mu(-) are determined in regions of q(2), the square of the dimuon invariant mass. The results are consistent with Standard Model predictions.
|
|
