Abstract: We present a tunable metal ion beam that delivers controllable ion currents in the picoamp range for testing of dry-phase ion sensors. Ion beams are formed by sequential atomic evaporation and single or multiple electron impact ionization, followed by acceleration into a sensing region. Controllability of the ionic charge state is achieved through tuning of electrode potentials that influence the retention time in the ionization region. Barium, lead, and cadmium samples have been used to test the system, with ion currents identified and quantified using a quadrupole mass analyzer. Realization of a clean Ba2+ ion beam within a bench-top system represents an important technical advance toward the development and characterization of barium tagging systems for neutrinoless double beta decay searches in xenon gas. This system also provides a testbed for investigation of novel ion sensing methodologies for environmental assay applications, with dication beams of Pb2+ and Cd2+ also demonstrated for this purpose.

Abstract: We analyze the decay B-0 -> K+ pi(-) pi(0) with a sample of 4.54 x 10(8) B (B) over bar events collected by the BABAR detector at the PEP-II asymmetric-energy B factory at SLAC, and extract the complex amplitudes of seven interfering resonances over the Dalitz plot. These results are combined with amplitudes measured in B-0 -> K-S(0)pi(+)pi(-) decays to construct isospin amplitudes from B-0 -> K* pi and B-0 -> rho K decays. We measure the phase of the isospin amplitude Phi(3/2), useful in constraining the Cabibbo-Kobayashi-Maskawa unitarity triangle angle gamma and evaluate a CP rate asymmetry sum rule sensitive to the presence of new physics operators. We measure direct CP violation in B-0 -> K*(+) pi(-) decays at the level of 3 sigma when measurements from both B-0 -> K+ pi(-) pi(0) and B-0 -> K-S(0) pi(+) pi(-) decays are combined.

Abstract: Using 347: 5 fb(-1) of data recorded by the BABAR detector at the PEP-II electron-positron collider, 244 x 10(3) signal events for the D+ -> K- pi(+)e(+)nu(e) decay channel are analyzed. This decay mode is dominated by the (K) over bar*(892)(0) contribution. We determine the (K) over bar*(892)(0) parameters: m(K*(892)0) (895.4 +/- 0.2 +/- 0.2) MeV/c(2),Gamma(0)(K*(892)0) (46.5 +/- 0.3 +/- 0.2) MeV/c(2), and the Blatt-Weisskopf parameter r(BW) = 2.1 +/- 0.5 +/- 0.5 (GeV/c)(-1), where the first uncertainty comes from statistics and the second from systematic uncertainties. We also measure the parameters defining the corresponding hadronic form factors at q(2) = 0 (r(V) = V(0)/A(1)(0) = 1.463 +/- 0.031, r(2) = A(2)(0)/A(1)(0) = 0.801 +/- 0.020 +/- 0.020) and the value of the axial-vector pole mass parametrizing the q(2) variation of A(1) and A(2): m(A) (2.63 +/- 0.10 +/- 0.13) GeV/c(2). The S-wave fraction is equal to (5.79 +/- 0.16 +/- 0: 15)%. Other signal components correspond to fractions below 1%. Using the D+ -> K-pi(+)pi(+) channel as a normalization, we measure the D+ semileptonic branching fraction: B(D+ K-pi(+)e(+)nu(e)) (4.00 +/- 0: 03 +/- 0.04 +/- 0.09) x 10(-2), where the third uncertainty comes from external inputs. We then obtain the value of the hadronic form factor A(1) at q(2) 0: A(1)(0) 0.6200 +/- 0.0056 +/- 0.0065 +/- 0.0071. Fixing the P-wave parameters, we measure the phase of the S wave for several values of the K pi mass. These results confirm those obtained with K pi production at small momentum transfer in fixed target experiments.

Abstract: We present measurements of B-meson decays to the final states eta'rho, eta'f(0), and eta'K*, where K* stands for a vector, scalar, or tensor strange meson. We observe a significant signal or evidence for eta'rho(+) and all the eta'K* channels. We also measure, where applicable, the charge asymmetries, finding results consistent with no direct CP violation in all cases. The measurements are performed on a data sample consisting of 467 X 10(6) B (B) over bar pairs, collected with the BABAR detector at the PEP-II e(+)e(-) collider at the SLAC National Accelerator Laboratory. Our results favor the theoretical predictions from perturbative QCD and QCD factorization and we observe an enhancement of the tensor K-2*(1430) with respect to the vector K*(892) component.

Abstract: Next-generation neutrinoless double beta decay experiments aim for half-life sensitivities of similar to 10(27) yr, requiring suppressing backgrounds to < 1 count/tonne/yr. For this, any extra background rejection handle, beyond excellent energy resolution and the use of extremely radiopure materials, is of utmost importance. The NEXT experiment exploits differences in the spatial ionization patterns of double beta decay and single-electron events to discriminate signal from background. While the former display two Bragg peak dense ionization regions at the opposite ends of the track, the latter typically have only one such feature. Thus, comparing the energies at the track extremes provides an additional rejection tool. The unique combination of the topology-based background discrimination and excellent energy resolution (1% FWHM at the Q-value of the decay) is the distinguishing feature of NEXT. Previous studies demonstrated a topological background rejection factor of <similar to> 5 when reconstructing electron-positron pairs in the Tl-208 1.6 MeV double escape peak (with Compton events as background), recorded in the NEXT-White demonstrator at the Laboratorio Subterraneo de Canfranc, with 72% signal efficiency. This was recently improved through the use of a deep convolutional neural network to yield a background rejection factor of similar to 10 with 65% signal efficiency. Here, we present a new reconstruction method, based on the Richardson-Lucy deconvolution algorithm, which allows reversing the blurring induced by electron diffusion and electroluminescence light production in the NEXT TPC. The new method yields highly refined 3D images of reconstructed events, and, as a result, significantly improves the topological background discrimination. When applied to real-data 1.6 MeV e(-)e(+) pairs, it leads to a background rejection factor of 27 at 57% signal efficiency.