Escribano, P., & Vicente, A. (2021). An ultraviolet completion for the Scotogenic model. Phys. Lett. B, 823, 136717–7pp.
Abstract: The Scotogenic model is an economical scenario that generates neutrino masses at the 1-loop level and includes a dark matter candidate. This is achieved by means of an ad hoc Z(2) symmetry, which forbids the tree-level generation of neutrino masses and stabilizes the lightest Z(2)-odd state. Neutrino masses are also suppressed by a quartic coupling, usually denoted by lambda(5). While the smallness of this parameter is natural, it is not explained in the context of the Scotogenic model. We construct an ultraviolet completion of the Scotogenic model that provides a natural explanation for the smallness of the lambda(5) parameter and induces the Z(2) parity as the low-energy remnant of a global U(1) symmetry at high energies. The low-energy spectrum contains, besides the usual Scotogenic states, a massive scalar and a massless Goldstone boson, hence leading to novel phenomenological predictions in flavor observables, dark matter physics and colliders.
|
Araujo Filho, A. A. (2024). Analysis of a regular black hole in Verlinde's gravity. Class. Quantum Gravity, 41(1), 015003–30pp.
Abstract: This work focuses on the examination of a regular black hole within Verlinde's emergent gravity, specifically investigating the Hayward-like (modified) solution. The study reveals the existence of three horizons under certain conditions, i.e. an event horizon and two Cauchy horizons. Our results indicate regions which phase transitions occur based on the analysis of heat capacity and Hawking temperature. To compute the latter quantity, we utilize three distinct methods: the surface gravity approach, Hawking radiation, and the application of the first law of thermodynamics. In the case of the latter approach, it is imperative to introduce a correction to ensure the preservation of the Bekenstein-Hawking area law. Geodesic trajectories and critical orbits (photon spheres) are calculated, highlighting the presence of three light rings. Additionally, we investigate the black hole shadows. Furthermore, the quasinormal modes are explored using third- and sixth-order Wentzel-Kramers-Brillouin approximations. In particular, we observe stable and unstable oscillations for certain frequencies. Finally, in order to comprehend the phenomena of time-dependent scattering in this scenario, we provide an investigation of the time-domain solution.
|
LHCb Collaboration(Aaij, R. et al), Jashal, B. K., Martinez-Vidal, F., Oyanguren, A., Remon Alepuz, C., & Ruiz Vidal, J. (2022). Analysis of Neutral B-Meson Decays into Two Muons. Phys. Rev. Lett., 128(4), 041801–13pp.
Abstract: The branching fraction B(B-s(0)->mu(+)mu(-)) = (3.09(-0.43-0.11)(+0.46+0.15)) x 10(-9) and the effective lifetime to tau(B-s(0) -> mu(+)mu(-)) = 2.07 +/- 0.29 +/- 0.03 ps are measured, where the first uncertainty is statistical and the second systematic. No significant signal for B-0 ->mu(+)mu(-)gamma) and B-s(0)->mu(+)mu(-)gamma decays is found and upper limits B(B(B-0 ->mu(+)mu(-)) < 2.6 x 10(-10) and B(B-s(0) -> mu(+)mu(-)gamma) < 2.0 x 10(-9) at the 95% C.L. are determined, where the latter is limited to the range m(mu mu) > 4.9 GeV/c(2). The results are in agreement with the standard model expectations.Branching fraction and effective lifetime measurements of the rare decay B-s(0) -> mu(+)mu(-) and searches for the decays B-0 -> mu(+)mu(-) and B-s(0) -> mu(+)mu(-)gamma are reported using proton-proton collision data collected with the LHCb detector at center-of-mass energies of 7, 8, and 13 TeV, corresponding to a luminosity of 9 fb(-1).
|
Garcia Canal, C. A., Tarutina, T., & Vento, V. (2023). Analysis of Nuclear Effects in Structure Functions and Their Connection with the Binding Energy of Nuclei. Braz. J. Phys., 53(6), 161–8pp.
Abstract: We describe nuclear effects in structure functions of nuclei in DIS by means of a multiplicative factor beta(A)(x) which differentiates the structure function of the bound nucleons from that of the free nucleons. Our analysis determines that beta(A)(x) establishes a relation between the quark-gluon dynamics expressed by the bound nucleon structure functions and the nuclear dynamics as described by the well-known semi-empirical Bethe-Weizsacker mass formula. This relation corroborates a connection between the underlying quark-gluon dynamics and the phenomenological nuclear dynamics.
|
Wang, E., Liang, W. H., & Oset, E. (2021). Analysis of the e(+)e(-) -> J/psi D(D)over-bar reaction close to the threshold concerning claims of a chi(c0)(2P) state. Eur. Phys. J. A, 57(1), 38–9pp.
Abstract: We analyze the D (D) over bar mass distribution from a recent Belle experiment on the e(+)e(-) -> J/.D (D) over bar reaction, and show that the mass distribution divided by phase sp(c)e does not have a clear peak above the D (D) over bar threshold that justifies the experimental claim of chi(c0)(2P) state from those data. Then we use a unitary formalismwith coupled channels D+ D-, D-0 (D) over bar (0), D-s(D) over bar (s), and eta eta, with some of the interactions taken from a theoretical model, and use the data to fix other parameters. We then show that, given the poor quality of the data, we can get different fits leading to very different D (D) over bar amplitudes, some of them supporting a D (D) over bar bound state and others not. The main conclusion is that the claim for the chi(c0)(2P) state, already included in the PDG, is premature, but refined data can provide very valuable information on the D (D) over bar scattering amplitude. As side effects, we warn about the use of a Breit-Wigner amplitude parameterization close to threshold, and show that the D-s(D) over bar (s) channel plays an important role in this reaction.
|
Wang, E., Li, H. S., Liang, W. H., & Oset, E. (2021). Analysis of the gamma gamma -> D(D)over-bar reaction and the D(D)over-bar bound state. Phys. Rev. D, 103(5), 054008–10pp.
Abstract: In this work, we investigate the reaction of gamma gamma -> D (D) over bar, taking into account the S-wave D (D) over bar final state interaction. By fitting to the D (D) over bar, invariant mass distributions measured by the Belle and BABAR Collaborations, we obtain a good reproduction of the data by means of a D (D) over bar, amplitude that produces a bound D (D) over bar, statewith isospin I = 0 close to threshold. The error bands of the fits indicate, however, that more precise data on this reaction are needed to be more assertive about the position and width of such a state.
|
Renteria-Estrada, D. F., Hernandez-Pinto, R. J., & Sborlini, G. F. R. (2021). Analysis of the Internal Structure of Hadrons Using Direct Photon Production. Symmetry-Basel, 13(6), 942–10pp.
Abstract: Achieving a precise description of the internal structure of hadrons is crucial for deciphering the hidden properties and symmetries of fundamental particles. It is a hard task since there are several bottlenecks in obtaining theoretical predictions starting from first principles. In order to complement highly accurate experiments, it is necessary to use ingenious strategies to impose constraints from the theory side. In this article, we describe how photons can be used to unveil the internal structure of hadrons. We explore how to describe NLO QCD plus LO QED corrections to hadron plus photon production at colliders and discuss the impact of these effects on the experimental measurements.
|
Gonzalez-Iglesias, D., Esperante, D., Gimeno, B., Blanch, C., Fuster-Martinez, N., Martinez-Reviriego, P., et al. (2023). Analysis of the Multipactor Effect in an RF Electron Gun Photoinjector. IEEE Trans. Electron Devices, 70(1), 288–295.
Abstract: The objective of this work is the evaluation of the risk of suffering a multipactor discharge within an RF electron gun photoinjector. Photoinjectors are a type of source for intense electron beams, which are the main electron source for synchrotron light sources, such as free-electron lasers. The analyzed device consists of 1.6 cells and it has been designed to operate at the S-band. Besides, around the RF gun there is an emittance compensation solenoid, whose magnetic field prevents the growth of the electron beam emittance, and thus the degradation of the properties of the beam. The multipactor analysis is based on a set of numerical simulations by tracking the trajectories of the electron cloud in the cells of the device. To reach this aim, an in-house multipactor code was developed. Specifically, two different cases were explored: with the emittance compensation solenoid assumed to be off and with the emittance compensation solenoid in operation. For both the cases, multipactor simulations were carried out exploring different RF electric field amplitudes. Moreover, for a better understanding of the multipactor phenomenon, the resonant trajectories of the electrons and the growth rate of the electrons population are investigated.
|
Bayar, M., Ikeno, N., & Oset, E. (2020). Analysis of the psi (4040) and psi (4160) decay into D-(*()) (D)over-bar(()*()), D-s(()*()) (D)over-bar(s)(()*()). Eur. Phys. J. C, 80(3), 222–9pp.
Abstract: We have performed an analysis of the e+e--> D(*) data in the region of the psi(4040) and psi(4160) resonances which have a substantial overlap and require special care. By using the P-3(0) model to relate the different D(*)(D) over bar(*) production modes, we make predictions for production of these channels and compare with experiment and other theoretical approaches. As a side effect we find that these resonances qualify largely as c (c) over bar states and theweight of the meson-meson components in the wave function is very small.
|
Miyagawa, P. S. et al, Bernabeu, P., Lacasta, C., Solaz, C., & Soldevila, U. (2024). Analysis of the results from Quality Control tests performed on ATLAS18 Strip Sensors during on-going production. Nucl. Instrum. Methods Phys. Res. A, 1064, 169457–9pp.
Abstract: The ATLAS experiment will replace its existing Inner Detector with the new all -silicon Inner Tracker (ITk) to cope with the operating conditions of the forthcoming high -luminosity phase of the LHC (HL-LHC). The outer regions of the ITk will be instrumented with similar to 18000 ATLAS18 strip sensors fabricated by Hamamatsu Photonics K.K. (HPK). With the launch of full-scale sensor production in 2021, the ITk strip sensor community has undertaken quality control (QC) testing of these sensors to ensure compliance with mechanical and electrical specifications agreed with HPK. The testing is conducted at seven QC sites on each of the monthly deliveries of similar to 500 sensors. This contribution will give an overview of the QC procedures and analysis; the tests most likely to determine pass/fail for a sensor are IV, long-term leakage current stability, full strip test and visual inspection. The contribution will then present trends in the results and properties following completion of similar to 60% of production testing. It will also mention challenges overcome through collaborative efforts with HPK during the early phases of production. With less than 5% of sensors rejected by QC testing, the overall production quality has been very good.
|