|
|
ATLAS Collaboration(Aad, G. et al), Amos, K. R., Aparisi Pozo, J. A., Bailey, A. J., Cabrera Urban, S., Cardillo, F., et al. (2022). Search for flavour-changing neutral-current interactions of a top quark and a gluon in pp collisions at root s=13 TeV with the ATLAS detector. Eur. Phys. J. C, 82(4), 334–35pp.
Abstract: A search is presented for the production of a single top quark via left-handed flavour-changing neutralcurrent (FCNC) interactions of a top quark, a gluon and an up or charm quark. Two production processes are considered: u + g -> t and c + g -> t. The analysis is based on proton-proton collision data taken at a centre-of-mass energy of 13 TeV with the ATLAS detector at the LHC. The data set corresponds to an integrated luminosity of 139 fb(-1). Events with exactly one electron or muon, exactly one b-tagged jet and missing transverse momentum are selected, resembling the decay products of a singly produced top quark. Neural networks based on kinematic variables differentiate between events from the two signal processes and events from background processes. The measured data are consistent with the background-only hypothesis, and limits are set on the production cross-sections of the signal processes: sigma(u + g -> t) x B(t -> Wb) x B(W -> l nu) < 3.0 pb and sigma(c + g -> t) xB(t -> Wb) xB(W -> l nu) < 4.7pb at the 95% confidence level, with B(W -> l nu) = 0.325 being the sum of branching ratios of all three leptonic decay modes of the W boson. Based on the framework of an effective field theory, the cross-section limits are translated into limits on the strengths of the tug and tcg couplings occurring in the theory: vertical bar C-uG(ut)vertical bar Lambda(2) < 0.057 TeV-2 and vertical bar C-uG(ct)vertical bar Lambda(2) < 0.14 TeV-2. These bounds correspond to limits on the branching ratios of FCNC-induced top-quark decays: B(t -> u + g) < 0.61 x 10(-4) and B(t -> c + g) < 3.7 x 10(-4).
|
|
|
|
Botella, F. J., Branco, G. C., Rebelo, M. N., Silva-Marcos, J. I., & Bastos, J. F. (2022). Decays of the heavy top and new insights on epsilon(K) in a one-VLQ minimal solution to the CKM unitarity problem. Eur. Phys. J. C, 82(4), 360–16pp.
Abstract: We propose a minimal extension of the Standard Model where an up-type vector-like quark, denoted T, is introduced and provides a simple solution to the CKM unitarity problem. We adopt the Botella-Chau parametrization in order to extract the 4 x 3 quark mixing matrix which contains the three angles of the 3 x 3 CKM matrix plus three new angles denoted theta(14), theta(24), theta(34). It is assumed that the mixing of T with standard quarks is dominated by theta(14). Imposing a recently derived, and much more restrictive, upper-bound on the New Physics contributions to epsilon(K) , we find, in the limit of exact theta(14) dominance where the other extra angles vanish, that epsilon(NP)(K) is too large. However, if one relaxes the exact theta(14) dominance limit, there exists a parameter region, where one may obtain epsilon(NP)(K) in agreement with experiment while maintaining the novel pattern of T decays with the heavy quark decaying predominantly to the light quarks d and u. We also find a reduction in the decay rate of K-L -> pi(0)nu(nu) over bar.
|
|
|
|
Husek, T., Monsalvez-Pozo, K., & Portoles, J. (2022). Constraints on leptoquarks from lepton-flavour-violating tau-lepton processes. J. High Energy Phys., 04(4), 165–31pp.
Abstract: Leptoquarks are ubiquitous in several extensions of the Standard Model and seem to be able to accommodate the universality-violation-driven B-meson-decay anomalies and the (g-2)(mu) discrepancy interpreted as deviations from the Standard Model predictions. In addition, the search for lepton-flavour violation in the charged sector is, at present, a major research program that could also be facilitated by the dynamics generated by leptoquarks. In this article, we consider a rather wide framework of both scalar and vector leptoquarks as the generators of lepton-flavour violation in processes involving the tau lepton. We single out its couplings to leptoquarks, thus breaking universality in the lepton sector, and we integrate out leptoquarks at tree level, generating the corresponding dimension-6 operators of the Standard Model Effective Field Theory. In ref. [1] we obtained model-independent bounds on the Wilson coefficients of those operators contributing to lepton-flavour-violating hadron tau decays and l-tau conversion in nuclei, with l = e, mu. Hence, we use those results to translate the bounds into the couplings of leptoquarks to the Standard Model fermions.
|
|
|
|
LHCb Collaboration(Aaij, R. et al), Jashal, B. K., Martinez-Vidal, F., Oyanguren, A., Remon Alepuz, C., & Ruiz Vidal, J. (2022). Search for massive long-lived particles decaying semileptonically at root s=13 TeV. Eur. Phys. J. C, 82(4), 373–19pp.
Abstract: A search is performed for massive long-lived particles (LLPs) decaying semileptonically into a muon and two quarks. Two kinds of LLP production processes were considered. In the first, a Higgs-like boson with mass from 30 to 200 GeV/c(2) is produced by gluon fusion and decays into two LLPs. The analysis covers LLP mass values from 10 GeV/c(2) up to about one half the Higgs-like boson mass. The second LLP production mode is directly from quark interactions, with LLP masses from 10 to 90 GeV/c(2). The LLP lifetimes considered range from 5 to 200 ps. This study uses LHCb data collected from proton-proton collisions at root s = 13 TeV, corresponding to an integrated luminosity of 5.4 fb(-1). No evidence of these long-lived states has been observed, and upper limits on the production cross-section times branching ratio have been set for each model considered.
|
|
|
|
ATLAS Collaboration(Aad, G. et al), Amos, K. R., Aparisi Pozo, J. A., Bailey, A. J., Cabrera Urban, S., Cardillo, F., et al. (2022). Measurement of the energy asymmetry in t(t)over-barj production at 13 TeV with the ATLAS experiment and interpretation in the SMEFT framework. Eur. Phys. J. C, 82(4), 374–36pp.
Abstract: A measurement of the energy asymmetry in jet-associated top-quark pair production is presented using 139 fb(-1) of data collected by the ATLAS detector at the Large Hadron Collider during pp collisions at root s = 13 TeV. The observable measures the different probability of top and antitop quarks to have the higher energy as a function of the jet scattering angle with respect to the beam axis. The energy asymmetry is measured in the semileptonic t (t) over bar decay channel, and the hadronically decaying top quark must have transverse momentum above 350 GeV. The results are corrected for detector effects to particle level in three bins of the scattering angle of the associated jet. The measurement agrees with the SM prediction at next-to-leading-order accuracy in quantum chromodynamics in all three bins. In the bin with the largest expected asymmetry, where the jet is emitted perpendicular to the beam, the energy asymmetry is measured to be -0.043 +/- 0.020, in agreement with the SM prediction of -0.037 +/- 0.003. Interpreting this result in the framework of the Standard Model effective field theory (SMEFT), it is shown that the energy asymmetry is sensitive to the top-quark chirality in four-quark operators and is therefore a valuable new observable in global SMEFT fits.
|
|
|
|
Cirigliano, V., Diaz-Calderon, D., Falkowski, A., Gonzalez-Alonso, M., & Rodriguez-Sanchez, A. (2022). Semileptonic tau decays beyond the Standard Model. J. High Energy Phys., 04(4), 152–61pp.
Abstract: Hadronic tau decays are studied as probe of new physics. We determine the dependence of several inclusive and exclusive tau observables on the Wilson coefficients of the low-energy effective theory describing charged-current interactions between light quarks and leptons. The analysis includes both strange and non-strange decay channels. The main result is the likelihood function for the Wilson coefficients in the tau sector, based on the up-to-date experimental measurements and state-of-the-art theoretical techniques. The likelihood can be readily combined with inputs from other low-energy precision observables. We discuss a combination with nuclear beta, baryon, pion, and kaon decay data. In particular, we provide a comprehensive and model-independent description of the new physics hints in the combined dataset, which are known under the name of the Cabibbo anomaly.
|
|
|
|
Carrio, F. (2022). The Data Acquisition System for the ATLAS Tile Calorimeter Phase-II Upgrade Demonstrator. IEEE Trans. Nucl. Sci., 69(4), 687–695.
Abstract: The tile calorimeter (TileCal) is the central hadronic calorimeter of the ATLAS experiment at the large hadron collider (LHC). In 2025, the LHC will be upgraded leading to the high luminosity LHC (HL-LHC). The HL-LHC will deliver an instantaneous luminosity up to seven times larger than the LHC nominal luminosity. The ATLAS Phase-II upgrade (2025-2027) will accommodate the subdetectors to the HL-LHC requirements. As part of this upgrade, the majority of the TileCal on-detector and off-detector electronics will be replaced using a new readout strategy, where the on-detector electronics will digitize and transmit digitized detector data to the off-detector electronics at the bunch crossing frequency (40 MHz). In the counting rooms, the off-detector electronics will compute reconstructed trigger objects for the first-level trigger and will store the digitized samples in pipelined buffers until the reception of a trigger acceptance signal. The off-detector electronics will also distribute the LHC clock to the on-detector electronics embedded within the digital data stream. The TileCal Phase-II upgrade project has undertaken an extensive research and development program that includes the development of a Demonstrator module to evaluate the performance of the new clock and readout architecture envisaged for the HL-LHC. The Demonstrator module equipped with the latest version of the on-detector electronics was built and inserted into the ATLAS experiment. The Demonstrator module is operated and read out using a Tile PreProcessor (TilePPr) Demonstrator which enables backward compatibility with the present ATLAS Trigger and Data AcQuisition (TDAQ), and the timing, trigger, and command (TTC) systems. This article describes in detail the main hardware and firmware components of the clock distribution and data acquisition systems for the Demonstrator module, focusing on the TilePPr Demonstrator.
|
|
|
|
Briz, J. A., Nerio, A. N., Ballesteros, C., Borge, M. J. G., Martinez, P., Perea, A., et al. (2022). Proton Radiographs Using Position-Sensitive Silicon Detectors and High-Resolution Scintillators. IEEE Trans. Nucl. Sci., 69(4), 696–702.
Abstract: Proton therapy is a cancer treatment technique currently in growth since it offers advantages with respect to conventional X-ray and gamma-ray radiotherapy. In particular, better control of the dose deposition allowing to reach higher conformity in the treatments causing less secondary effects. However, in order to take full advantage of its potential, improvements in treatment planning and dose verification are required. A new prototype of proton computed tomography scanner is proposed to design more accurate and precise treatment plans for proton therapy. Our prototype is formed by double-sided silicon strip detectors and scintillators of LaBr3(Ce) with high energy resolution and fast response. Here, the results obtained from an experiment performed using a 100-MeV proton beam are presented. Proton radiographs of polymethyl methacrylate (PMMA) samples of 50-mm thickness with spatial patterns in aluminum were taken. Their properties were studied, including reproduction of the dimensions, spatial resolution, and sensitivity to different materials. Structures of up to 2 mm are well resolved and the sensitivity of the system was enough to distinguish the thicknesses of 10 mm of aluminum or PMMA. The spatial resolution of the images was 0.3 line pairs per mm (MTF-10%). This constitutes the first step to validate the device as a proton radiography scanner.
|
|
|
|
Guerrero, M., Olmo, G. J., Rubiera-Garcia, D., & Saez-Chillon Gomez, D. (2022). Multiring images of thin accretion disk of a regular naked compact object. Phys. Rev. D, 106(4), 044070–13pp.
Abstract: We discuss the importance of multiring images in the optical appearance of a horizonless spherically symmetric compact object, when illuminated by an optically thin accretion disk. Such an object corresponds to a subcase of an analytically tractable extension of the Kerr solution dubbed as the “eye of the storm” by Simpson and Visser in [J. Cosmol. Astropart. Phys. 03 (2022) 011], which merits in removing curvature singularities via an asymptotically Minkowski core, while harboring both a critical curve and an infinite potential barrier at the center for null geodesics. This multiring structure is induced by light rays winding several times around the object, and whose luminosity is significantly boosted as compared to the Schwarzschild solution by the modified shape of the potential. Using three toy profiles for the emission of an infinitely thin disk, truncated at its inner edge (taking its maximum value there) and having different decays with the distance, we discuss the image created by up to eight rings superimposed on top of the direct emission of the disk as its edge is moved closer to the center of the object. Our results point to the existence of multiring images with a non-negligible luminosity in shadow observations when one allows for the existence of other compact objects in the cosmic zoo beyond the Schwarzschild solution. Such multiring images could be detectable within the future projects on very long baseline interferometry.
|
|
|
|
Di Valentino, E., Gariazzo, S., & Mena, O. (2022). Model marginalized constraints on neutrino properties from cosmology. Phys. Rev. D, 106(4), 043540–9pp.
Abstract: We present robust, model-marginalized limits on both the total neutrino mass (E m1,) and abundances (Neff) to minimize the role of parametrizations, priors and models when extracting neutrino properties from cosmology. The cosmological observations we consider are cosmic microwave background temperature fluctuation and polarization measurements, supernovae Ia luminosity distances, baryon acoustic oscillation observations and determinations of the growth rate parameter from the Data Release 16 of the Sloan Digital Sky Survey IV. The degenerate neutrino mass spectrum (which implies the prior sigma m(1), > 0) is weakly or moderately preferred over the normal and inverted hierarchy possibilities, which imply the priors sigma m(1), > 0.06 and sigma m(1), > 0.1 eV respectively. Concerning the underlying cosmological model, the ACDM minimal scenario is almost always strongly preferred over the possible extensions explored here. The most constraining 95% CL bound on the total neutrino mass in the ACDM + sigma m(1), picture is sigma m(1), < 0.087 eV. The parameter N-eff is restricted to 3.08 +/- 0.17 (68% CL) in the ACDM + Neff model. These limits barely change when considering the ACDM + sigma m(1), + Neff scenario. Given the robustness and the strong constraining power of the cosmological measurements employed here, the model -marginalized posteriors obtained considering a large spectra of nonminimal cosmologies are very close to the previous bounds, obtained within the ACDM framework in the degenerate neutrino mass spectrum. Future cosmological measurements may improve the current Bayesian evidence favoring the degenerate neutrino mass spectra, challenging therefore the consistency between cosmological neutrino mass bounds and oscillation neutrino measurements, and potentially suggesting a more complicated cosmological model and/or neutrino sector.
|
|
