Home | [1–10] << 11 12 13 14 15 16 17 18 19 20 >> [21–30] |
Baeza-Ballesteros, J., Donini, A., & Nadal-Gisbert, S. (2022). Dynamical measurements of deviations from Newton's 1/r(2) law. Eur. Phys. J. C, 82(2), 154–30pp.
Abstract: In Ref. Donini and Marimon (Eur Phys J C 76:696, arXiv:1609.05654, 2016), an experimental setup aiming at the measurement of deviations from the Newtonian 1/r(2) distance dependence of gravitational interactions was proposed. The theoretical idea behind this setup was to study the trajectories of a “Satellite” with a mass m(S) similar to O(10(-9)) g around a “Planet” with mass m(P) is an element of [10(-7), 10(-5)] g, looking for precession of the orbit. The observation of such feature induced by gravitational interactions would be an unambiguous indication of a gravitational potential with terms different from 1/r and, thus, a powerful tool to detect deviations from Newton's 1/r(2) law. In this paper we optimize the proposed setup in order to achieve maximal sensitivity to look for such Beyond-Newtonian corrections. We then study in detail possible background sources that could induce precession and quantify their impact on the achievable sensitivity. We finally conclude that a dynamical measurement of deviations from newtonianity can test Yukawa-like corrections to the 1/r potential with strength as low as alpha similar to 10(-2) for distances as small as lambda similar to 10 μm.
|
Blanes-Selva, V., Ruiz-Garcia, V., Tortajada, S., Benedi, J. M., Valdivieso, B., & Garcia-Gomez, J. M. (2021). Design of 1-year mortality forecast at hospital admission: A machine learning approach. Health Inform. J., 27(1), 13pp.
Abstract: Palliative care is referred to a set of programs for patients that suffer life-limiting illnesses. These programs aim to maximize the quality of life (QoL) for the last stage of life. They are currently based on clinical evaluation of the risk of 1-year mortality. The main aim of this work is to develop and validate machine-learning-based models to predict the exitus of a patient within the next year using data gathered at hospital admission. Five machine-learning techniques were applied using a retrospective dataset. The evaluation was performed with five metrics computed by a resampling strategy: Accuracy, the area under the ROC curve, Specificity, Sensitivity, and the Balanced Error Rate. All models reported an AUC ROC from 0.857 to 0.91. Specifically, Gradient Boosting Classifier was the best model, producing an AUC ROC of 0.91, a sensitivity of 0.858, a specificity of 0.808, and a BER of 0.1687. Information from standard procedures at hospital admission combined with machine learning techniques produced models with competitive discriminative power. Our models reach the best results reported in the state of the art. These results demonstrate that they can be used as an accurate data-driven palliative care criteria inclusion.
|
Menendez, A., Esperante, D., Garcia-Olcina, R., Torres, J., Perez-Soler, J., Marco, R., et al. (2022). RF Acquisition System Based on μTCA for Testing of High-Gradient Acceleration Cavities. Electronics, 11(5), 720–22pp.
Abstract: The radio frequency (RF) laboratory hosted in the Corpuscular Physics Institute (IFIC) of the University of Valencia is designed to house a high-power and high-repetition-rate facility to test normal conduction RF accelerator cavities in the S-Band (2.9985 GHz) in order to perform R & D activities related to particle accelerator cavities. The system, which manages the entire process of RF signal generation, data acquisition and closed-loop control of the laboratory, is currently based on a modular and compact PXI platform system. This contribution details the development of a platform with similar features, but which is based on open architecture standards at both the hardware and software level. For this purpose, a complete system based on the μTCA platform has been developed. This new system must be able to work with accelerator cavities at other operating frequencies, such as 750 MHz, as well as to explore different options at firmware and software levels based on open-source codes.
|
Penalva, N., Hernandez, E., & Nieves, J. (2022). Visible energy and angular distributions of the charged particle from the tau-decay in b -> C tau (mu(nu)over-bar(mu)nu(tau), pi nu(tau), rho nu(tau))(nu)over-bar(tau) reactions. J. High Energy Phys., 04(4), 026–25pp.
Abstract: We study the d(2)Gamma(d)/(d omega d cos theta(d) ), d Gamma(d)/d cos theta(d) and d Gamma(d)/dE(d) distributions, which are defined in terms of the visible energy and polar angle of the charged particle from the tau-decay in b -> C tau (mu(nu) over bar (mu)nu(tau), pi nu(tau), rho nu(tau))(nu) over bar (tau), reactions. These differential decay widths could be measured in the near future with certain precision. The first two contain information on the transverse tau-spin, tau-angular and tau-angular-spin asymmetries of the H-b -> H-c tau(nu) over bar (tau) parent decay and, from a dynamical point of view, they are richer than the commonly used one, d(2)Gamma(d)/(d omega dE(d)), since the latter only depends on the tau longitudinal polarization. We pay attention to the deviations with respect to the predictions of the standard model (SM) for these new observables, considering new physics (NP) operators constructed using both right- and left-handed neutrino fields, within an effective field-theory approach. We present results for Lambda(b) -> Lambda(c)tau (mu(nu) over bar (mu)nu(tau), pi nu(tau), rho nu(tau))(nu) over bar (tau) and (B) over bar -> D-(*()) tau (mu(nu) over bar (mu)nu(tau), pi nu(tau), rho nu(tau))(nu) over bar (tau) sequential decays and discuss their use to disentangle between different NP models. In this respect, we show that d Gamma(d)/d cos theta(d) , which should be measured with sufficiently good statistics, becomes quite useful, especially in the tau -> pi nu(tau) mode. The study carried out in this work could be of special relevance due to the recent LHCb measurement of the lepton flavor universality ratio R Lambda(c) in agreement with the SM. The experiment identified the tau using its hadron decay into pi(-)pi(+)pi(-)nu(tau), and this result for R Lambda(c )which is in conflict with the phenomenology from the b-meson sector, needs confirmation from other tau reconstruction channels.
|
Bruschini, R., & Gonzalez, P. (2022). Is chi(c1)(3872) generated from string breaking? Phys. Rev. D, 105(5), 054028–6pp.
Abstract: We show, from a diabatic analysis of lattice results for string breaking, that mixing of Q (Q) over bar with open-flavor meson-meson configurations may be expressed through a mixing potential which is order 1/m(Q). A relation between the minimum string breaking energy gap and the string tension comes out naturally. Using this relation, and matching the energy gap for b (b) over bar with lattice QCD data, we study the mixing in the c (c) over bar case without any additional parameter. A 1(++) bound state very close below the D-0(D) over bar*(0) threshold, in perfect correspondence with chi(c1)(3872), is predicted.
|
Chiera, N. M., Maugeri, E. A., Danilov, I., Balibrea-Correa, J., Domingo-Pardo, C., Koster, U., et al. (2022). Preparation of PbSe targets for Se-79 neutron capture cross section studies. Nucl. Instrum. Methods Phys. Res. A, 1029, 166443–7pp.
Abstract: A methodology for the production of PbSe targets for Se-79 neutron capture cross section studies is presented. PbSe material was synthesized by direct reaction of its constituents at high temperature, and characterized by X-ray diffraction. Thin PbSe targets, produced for cross section experiments with the surrogate reaction method, were obtained by applying a physical vapor deposition technique, and their morphology and composition were analyzed by X-ray fluorescence, Scanning Electron Microscopy, and Energy dispersive X-ray spectroscopy. (PbSe)-Se-79 targets produced for cross section measurements with the Time of Flight method were characterized by gamma-ray spectroscopy. Finally, a procedure for the recovery of Se from PbSe is suggested. The purity of the retrieved Se was determined with Inductively Coupled Plasma Optical Emission Spectroscopy.
Keywords: Lead selenide; Selenium-79; Neutron capture; PbSe target; Se separation
|
Alvarado, F., & Alvarez-Ruso, L. (2022). Light-quark mass dependence of the nucleon axial charge and pion-nucleon scattering phenomenology. Phys. Rev. D, 105(7), 074001–13pp.
Abstract: The light-quark mass dependence of the nucleon axial isovector charge (gA) has been studied up to nextto-next-to-leading order, O(p4), in relativistic chiral perturbation theory using extended-on-mass-shell renormalization, without and with explicit Delta(1232) degrees of freedom. We show that in the Delta-less case, at this order, the flat trend of gA(MN) exhibited by state-of-the-art lattice QCD (LQCD) results cannot be reproduced using low energy constants extracted from pion-nucleon elastic and inelastic scattering. A satisfactory description of these LQCD data is only achieved in the theory with Delta. From this fit, we report gA(MN(phys)) = 1.260 1 0.012, close to the experimental result, and d16 = -0.88 1 0.88 GeV-2, in agreement with its empirical value. The large uncertainties are of theoretical origin, reflecting the difference between O(p3) and O(p4) that still persists at large MN in presence of the Delta.
|
Barenboim, G. (2022). Some Aspects About Pushing the CPT and Lorentz Invariance Frontier With Neutrinos. Front. Physics, 10, 813753–7pp.
Abstract: The CPT symmetry, which combines Charge Conjugation, Parity, and Time Reversal, is a cornerstone of our model-building method, and its probable violation will endanger the most extended tool we presently utilize to explain physics, namely local relativistic quantum fields. However, the kaon system's conservation constraints appear to be rather severe. We will show in this paper that neutrino oscillation experiments can enhance this limit by many orders of magnitude, making them an excellent instrument for investigating the basis of our understanding of Nature. As a result, verifying CPT invariance does not evaluate a specific model, but rather the entire paradigm. Therefore, as the CPT's status in the neutrino sector, linked or not to Lorentz invariance violation, will be assessed at an unprecedented level by current and future long baseline experiments, distinguishing it from comparable experimental fingerprints coming from non-standard interactions is critical. Whether the entire paradigm or simply the conventional model of neutrinos is at jeopardy is significantly dependent on this.
|
Carrio, F. (2022). The Data Acquisition System for the ATLAS Tile Calorimeter Phase-II Upgrade Demonstrator. IEEE Trans. Nucl. Sci., 69(4), 687–695.
Abstract: The tile calorimeter (TileCal) is the central hadronic calorimeter of the ATLAS experiment at the large hadron collider (LHC). In 2025, the LHC will be upgraded leading to the high luminosity LHC (HL-LHC). The HL-LHC will deliver an instantaneous luminosity up to seven times larger than the LHC nominal luminosity. The ATLAS Phase-II upgrade (2025-2027) will accommodate the subdetectors to the HL-LHC requirements. As part of this upgrade, the majority of the TileCal on-detector and off-detector electronics will be replaced using a new readout strategy, where the on-detector electronics will digitize and transmit digitized detector data to the off-detector electronics at the bunch crossing frequency (40 MHz). In the counting rooms, the off-detector electronics will compute reconstructed trigger objects for the first-level trigger and will store the digitized samples in pipelined buffers until the reception of a trigger acceptance signal. The off-detector electronics will also distribute the LHC clock to the on-detector electronics embedded within the digital data stream. The TileCal Phase-II upgrade project has undertaken an extensive research and development program that includes the development of a Demonstrator module to evaluate the performance of the new clock and readout architecture envisaged for the HL-LHC. The Demonstrator module equipped with the latest version of the on-detector electronics was built and inserted into the ATLAS experiment. The Demonstrator module is operated and read out using a Tile PreProcessor (TilePPr) Demonstrator which enables backward compatibility with the present ATLAS Trigger and Data AcQuisition (TDAQ), and the timing, trigger, and command (TTC) systems. This article describes in detail the main hardware and firmware components of the clock distribution and data acquisition systems for the Demonstrator module, focusing on the TilePPr Demonstrator.
|
Albaladejo, M. (2022). T-cc(+) coupled channel analysis and predictions. Phys. Lett. B, 829, 137052–13pp.
Abstract: A coupled channel analysis of the D*D-+(0) and D*D-0(+) system is performed to study the doubly charmed T-cc(+) state recently discovered by the LHCb collaboration. We use a simple model for the scattering amplitude and production mechanism that allows us to describe well the experimental spectrum, and obtain the T-cc(+) pole in the coupled channel T-matrix. We find that this bound state has a large molecular component. The isospin (I = 0 or I = 1) of the state cannot be inferred from the (DD0)-D-0 pi(+) spectrum alone, although there is some experimental evidence that points to the I = 0 interpretation. Therefore, we use the same formalism to predict other DD pi spectra. In the case the T-cc(+) has I = 1, we also predict the location of the other two members (T-cc(+) and T-cc(0)) of the triplet. Finally, using Heavy-Quark Spin Symmetry, we predict the location of possible heavier D*D* (I = 0 or I= 1) partners.
|