|
|
Aguilar, A. C., Binosi, D., & Papavassiliou, J. (2016). The gluon mass generation mechanism: A concise primer. Front. Phys., 11(2), 111203–18pp.
Abstract: We present a pedagogical overview of the nonperturbative mechanism that endows gluons with a dynamical mass. This analysis is performed based on pure Yang-Mills theories in the Landau gauge, within the theoretical framework that emerges from the combination of the pinch technique with the background field method. In particular, we concentrate on the Schwinger-Dyson equation satisfied by the gluon propagator and examine the necessary conditions for obtaining finite solutions within the infrared region. The role of seagull diagrams receives particular attention, as do the identities that enforce the cancellation of all potential quadratic divergences. We stress the necessity of introducing nonperturbative massless poles in the fully dressed vertices of the theory in order to trigger the Schwinger mechanism, and explain in detail the instrumental role of these poles in maintaining the Becchi-Rouet-Stora-Tyutin symmetry at every step of the mass-generating procedure. The dynamical equation governing the evolution of the gluon mass is derived, and its solutions are determined numerically following implementation of a set of simplifying assumptions. The obtained mass function is positive definite, and exhibits a power law running that is consistent with general arguments based on the operator product expansion in the ultraviolet region. A possible connection between confinement and the presence of an inflection point in the gluon propagator is briefly discussed.
|
|
|
|
Aguilar, A. C., De Soto, F., Ferreira, M. N., Papavassiliou, J., Pinto-Gomez, F., Roberts, C. D., et al. (2023). Schwinger mechanism for gluons from lattice QCD. Phys. Lett. B, 841, 137906–8pp.
Abstract: Continuum and lattice analyses have revealed the existence of a mass-scale in the gluon two-point Schwinger function. It has long been conjectured that this expresses the action of a Schwinger mechanism for gauge boson mass generation in quantum chromodynamics (QCD). For such to be true, it is necessary and sufficient that a dynamically-generated, massless, colour-carrying, scalar gluon+gluon correlation emerges as a feature of the dressed three-gluon vertex. Working with results on elementary Schwinger functions obtained via the numerical simulation of lattice-regularised QCD, we establish with an extremely high level of confidence that just such a feature appears; hence, confirm the conjectured origin of the gluon mass scale.
|
|
|
|
Ai, X. C. et al, & Passemar, E. (2025). Conceptual design report of the Super Tau-Charm Facility: the accelerator. Nucl. Sci. Tech., 36(12), 242–170pp.
Abstract: Electron-positron colliders operating in the GeV center-of-mass range, or tau-charm energy region, have been proved to enable competitive frontier research due to several unique features. With the progress of high-energy physics in the last two decades, a new-generation Tau-Charm factory, called the Super Tau-Charm Facility (STCF), has been actively promoted by the particle physics community in China. STCF has the potential to address fundamental questions such as the essence of color confinement and the matter-antimatter asymmetry within the next decades. The main design goals of the STCF are a center-of-mass energy ranging from 2 to 7 GeV and a luminosity surpassing 5 x 10(34) cm(-2) s(-1) that is optimized at a center-of-mass energy of 4 GeV, which is approximately 50 times that of the currently operating Tau-Charm factory-BEPCII. The STCF accelerator has two main parts: a double-ring collider with a crab-waist collision scheme and an injector that provides top-up injections for both electron and positron beams. As a typical third-generation electron-positron circular collider, the STCF accelerator faces many challenges in both accelerator physics and technology. In this paper, the conceptual design of the STCF accelerator complex is presented, including the ongoing efforts and plans for technological research and development, as well as the required infrastructure. The STCF project aims to secure support from the Chinese central government for its construction during the 15th Five-Year Plan (2026-2030).
|
|
|
|
Antusch, S., Levy, M., & Centelles Chulia, S. (2026). Gravity-assisted neutrino masses. Phys. Lett. B, 876, 140410–6pp.
Abstract: Gravity is generally expected to violate global symmetries, including lepton number. However, neutrino masses from the Planck-suppressed Weinberg operator are typically too small to account for oscillation data. We propose a new model-building approach to low-scale neutrino mass generation, in which an intermediate spontaneous symmetry-breaking scale generates masses and mixings in the heavy neutral lepton (HNL) sector, while leaving an unbroken residual symmetry Gres that forbids light-neutrino masses. The observed light-neutrino masses then arise because gravity breaks Gres via Planck-suppressed operators, inducing the small lepton-number violation required in low-scale seesaw constructions. The HNLs form pseudo-Dirac pairs, with masses potentially within reach of future colliders and complementary tests in precision searches such as charged lepton flavour violation (cLFV). As an illustration, we present a representative realisation of this class of models and show that, for O(1) operator coefficients, it predicts a region in the (MR, Theta 2)-plane that can be testable via displaced-vertex searches at the High-Luminosity (HL-)LHC and the FCC-ee.
|
|
|
|
Bordes, J., Hong-Mo, C., & Tsun, T. S. (2015). A first test of the framed standard model against experiment. Int. J. Mod. Phys. A, 30(11), 1550051–34pp.
Abstract: The framed standard model (FSM) is obtained from the standard model by incorporating, as field variables, the frame vectors (vielbeins) in internal symmetry space. It gives the standard Higgs boson and 3 generations of quarks and leptons as immediate consequences. It gives moreover a fermion mass matrix of the form: m = mT alpha alpha dagger, where alpha is a vector in generation space independent of the fermion species and rotating with changing scale, which has already been shown to lead, generically, to up-down mixing, neutrino oscillations and mass hierarchy. In this paper, pushing the FSM further, one first derives to 1-loop order the RGE for the rotation of alpha, and then applies it to fit mass and mixing data as a first test of the model. With 7 real adjustable parameters, 18 measured quantities are fitted, most (12) to within experimental error or to better than 0.5 percent, and the rest (6) not far off. (A summary of this fit can be found in Table 2 of this paper.) Two notable features, both generic to FSM, not just specific to the fit, are: (i) that a theta-angle of order unity in the instanton term in QCD would translate via rotation into a Kobayashi-Maskawa phase in the CKM matrix of about the observed magnitude (J similar to 10(-5)), (ii) that it would come out correctly that m(u) < m(d), despite the fact that m(t) >> m(b), m(c) >> m(s). Of the 18 quantities fitted, 12 are deemed independent in the usual formulation of the standard model. In fact, the fit gives a total of 17 independent parameters of the standard model, but 5 of these have not been measured by experiment.
|
|
|
|
Ferreira, M. N., & Papavassiliou, J. (2023). Gauge Sector Dynamics in QCD. Particles, 6(1), 312–363.
Abstract: The dynamics of the QCD gauge sector give rise to non-perturbative phenomena that are crucial for the internal consistency of the theory; most notably, they account for the generation of a gluon mass through the action of the Schwinger mechanism, the taming of the Landau pole, the ensuing stabilization of the gauge coupling, and the infrared suppression of the three-gluon vertex. In the present work, we review some key advances in the ongoing investigation of this sector within the framework of the continuum Schwinger function methods, supplemented by results obtained from lattice simulations.
|
|
|
|
Gonzalez-Iglesias, D., Aksoy, A., Esperante, D., Gimeno, B., Latina, A., Boronat, M., et al. (2021). X-band RF photoinjector design for the CompactLight project. Nucl. Instrum. Methods Phys. Res. A, 1014, 165709–10pp.
Abstract: RF photoinjectors have been under development for several decades to provide the high-brightness electron beams required for X-ray Free Electron Lasers. This paper proposes a photoinjector design that meets the Horizon 2020 CompactLight design study requirements. It consists of a 5.6-cell, X-band (12 GHz) RF gun, an emittance-compensating solenoid and two X-band traveling-wave structures that accelerate the beam out of the space-charge-dominated regime. The RF gun is intended to operate with a cathode gradient of 200 MV/m, and the TW structures at a gradient of 65 MV/m. The shape of the gun cavity cells was optimized to reduce the peak electric surface field. An assessment of the gun RF breakdown likelihood is presented as is a multipacting analysis for the gun coaxial coupler. RF pulse heating on the gun inner surfaces is also evaluated and beam dynamics simulations of the 100 MeV photoinjector are summarized.
|
|
|
|
Gutierrez Arance, H., Carrio, F., Fiorini, L., Folgueras, S., Hervas Alvarez, F., Leguina Lppez, P., et al. (2026). FPGA acceleration of matrix-element calculations for Monte Carlo event generation. Comput. Phys. Commun., 329, 110394–16pp.
Abstract: We present an FPGA-based study of the acceleration of matrix-element computations for Monte Carlo event generation, using MadGraph5_aMC@NLO as a benchmark framework. Two complementary benchmarks are considered. First, we map the phase-space-generation and matrix-element-evaluation stages of the benchmark process e(+) e(-) -> mu(+) mu(-) onto an AMD Alveo U250 accelerator, enabling a compute-only assessment of the mapped FPGA pipeline. Second, for the more complex gg -> t (t) over bar + X processes with increasing jet multiplicity, we investigate FPGA acceleration of the colour-algebra kernels as structured targets for selective acceleration. In this second case, the reported speedups correspond to the isolated colour-reduction kernel operating on precomputed amplitudes, rather than to the full matrix-element evaluation or the complete event-generation workflow. The proposed implementations are developed using High-Level Synthesis and are evaluated in terms of numerical accuracy, performance, device-level energy efficiency, resource utilisation, and scalability. Under the stated compute-only measurement methodology, the FPGA implementations achieve substantial speedups and lower energy per event than the evaluated CPU and GPU baselines. For the considered benchmarks, the numerical results show good agreement on average with the corresponding CPU reference calculations, while the resource analysis highlights the importance of numerical representation in determining FPGA scalability. Taken together, these results demonstrate the potential of FPGAs for accelerating selected matrix-element and colour-algebra kernels, while further integrated evaluation is required to determine their end-to-end benefit within heterogeneous Monte Carlo event-generation workflows in high-energy physics.
|
|
|
|
n_TOF Collaboration(Cano-Ott, D. et al), Domingo-Pardo, C., & Tain, J. L. (2011). Neutron Capture Measuremetns on Minor Actinides at the n_TOF Facility at CERN: Past, Present and Future. J. Korean Phys. Soc., 59(2), 1809–1812.
Abstract: The successful development of advanced nuclear systems for sustainable energy production and nuclear waste management depends on high quality nuclear data libraries. Recent sensitivity studies and reports [1-3] have identified the need for substantially improving the accuracy of neutron cross-section data for minor actinides. The n_TOF collaboration has initiated an ambitious experimental program for the measurement of neutron capture cross sections of minor actinides. Two experimental setups have been constructed for this purpose: a Total Absorption Calorimeter (TAC) [4] for measuring neutron capture cross-sections of low-mass and/or radioactive samples and a set of two low neutron sensitivity C(6)D(6) detectors for the less radioactive materials.
|
|
|
|
Romero-Barrientos, J., Marquez Damian, J. I., Molina, F., Zambra, M., Aguilera, P., Lopez-Usquiano, F., et al. (2022). Calculation of kinetic parameters beta eff and L with modified open source Monte Carlo code OpenMC(TD). Nucl. Eng. Technol., 54(3), 811–816.
Abstract: This work presents the methodology used to expand the capabilities of the Monte Carlo code OpenMC for the calculation of reactor kinetic parameters: effective delayed neutron fraction beff and neutron generation time L. The modified code, OpenMC(Time-Dependent) or OpenMC(TD), was then used to calculate the effective delayed neutron fraction by using the prompt method, while the neutron generation time was estimated using the pulsed method, fitting L to the decay of the neutron population. OpenMC(TD) is intended to serve as an alternative for the estimation of kinetic parameters when licensed codes are not available. The results obtained are compared to experimental data and MCNP calculated values for 18 benchmark configurations.
|
|
