|
|
Liu, S., Bogard, F., Cornebise, P., Faus-Golfe, A., Fuster-Martinez, N., Griesmayer, E., et al. (2016). In vacuum diamond sensor scanner for beam halo measurements in the beam line at the KEK Accelerator Test Facility. Nucl. Instrum. Methods Phys. Res. A, 832, 231–242.
Abstract: The investigation of beam halo transverse distributions is important for the understanding of beam losses and the control of backgrounds in Future Linear Colliders (FLC). A novel in vacuum diamond sensor (DSv) scanner with four strips has been designed and developed for the investigation of the beam halo transverse distributions and also for the diagnostics of Compton recoil electrons after the interaction point (IP) of ATF2, a low energy (1.3 GeV) prototype of the final focus system for the ILC and CLIC linear collider projects. Using the DSv, a dynamic range of similar to 10(6) has been successfully demonstrated and confirmed for the first time in simultaneous beam core (similar to 10(6) electrons) and beam halo (similar to 10(3) electrons) measurements at ATF2. This report presents the characterization, performance studies and tests of diamond sensors using an a source, as well as using the electron beams at PHIL, a low energy (<5 MeV) photo-injector at LAL, and at ATF2. First beam halo measurement results using the DSv at ATF2 with different beam intensities and vacuum levels are also presented. Such measurements not only allow one to evaluate the different sources of beam halo generation but also to define the requirements for a suitable collimation system to be installed at ATF2, as well as to optimize its performance during future operation.
|
|
|
|
Barenboim, G., & Park, W. I. (2016). Small changes to the inflaton potential can result in large changes in observables. Phys. Rev. D, 93(12), 123508–5pp.
Abstract: We show that a tiny correction to the inflaton potential can make critical changes in the inflationary observables for some types of inflation models.
|
|
|
|
Perello Rosello, M., & Vos, M. (2016). Constraints on four-fermion interactions from the t (t)over-barcharge asymmetry at hadron colliders. Eur. Phys. J. C, 76(4), 200–9pp.
Abstract: The charge asymmetry in top quark production at hadron colliders is sensitive to beyond-the-Standard-Model four-fermion interactions. In this study we compare the sensitivity of t (t) over bar cross-section and charge asymmetry measurements to effective operators describing four-fermion interactions and study the limits on the validity of this approach. A fit to a combination of Tevatron and LHC measurements yields stringent limits on the linear combinations C-1 and C-2 of the four-fermion effective operators.
|
|
|
|
XENON Collaboration(Aprile, E. et al), & Orrigo, S. E. A. (2016). Physics reach of the XENON1T dark matter experiment. J. Cosmol. Astropart. Phys., 04(4), 027–37pp.
Abstract: The XENON1T experiment is currently in the commissioning phase at the Laboratori Nazionali del Gran Sasso, Italy. In this article we study the experiment's expected sensitivity to the spin-independent WIMP-nucleon interaction cross section, based on Monte Carlo predictions of the electronic and nuclear recoil backgrounds. The total electronic recoil background in 1 tonne fiducial volume and (1, 12) keV electronic recoil equivalent energy region, before applying any selection to discriminate between electronic and nuclear recoils, is (1.80+/-0.15) . 10(-4) (kg.day.keV)(-1), mainly due to the decay of Rn-222 daughters inside the xenon target. The nuclear recoil background in the corresponding nuclear recoil equivalent energy region (4, 50) keV, is composed of (0.6 +/- 0.1) (t.y)(-1) from radiogenic neutrons, (1.8+/-0.3) . 10(-2) (t.y)(-1) from coherent scattering of neutrinos, and less than 0.01 (t.y)(-1) from muon-induced neutrons. The sensitivity of XENON1T is calculated with the Pro file Likelihood Ratio method, after converting the deposited energy of electronic and nuclear recoils into the scintillation and ionization signals seen in the detector. We take into account the systematic uncertainties on the photon and electron emission model, and on the estimation of the backgrounds, treated as nuisance parameters. The main contribution comes from the relative scintillation efficiency L-eff, which affects both the signal from WIMPs and the nuclear recoil backgrounds. After a 2 y measurement in 1 tonne fiducial volume, the sensitivity reaches a minimum cross section of 1.6 . 10(-47) cm(2) at m(chi) = 50 GeV/c(2).
|
|
|
|
Boucenna, S. M., Morisi, S., & Vicente, A. (2016). LHC diphoton resonance from gauge symmetry. Phys. Rev. D, 93(11), 115008–8pp.
Abstract: Motivated by what is possibly the first sign of new physics seen at the LHC, the diphoton excess at 750 GeV in ATLAS and CMS, we present a model that provides naturally the necessary ingredients to explain the resonance. The simplest phenomenological explanation for the diphoton excess requires a new scalar state, X(750), as well as additional vectorlike (VL) fermions introduced in an ad-hoc way in order to enhance its decays into a pair of photons and/or increase its production cross section. We show that the necessary VL quarks and their couplings can emerge naturally from a complete framework based on the SU(3)(L) circle times U(1)(X) gauge symmetry.
|
|
