|
ATLAS Collaboration(Aad, G. et al), Cabrera Urban, S., Castillo Gimenez, V., Costa, M. J., Ferrer, A., Fiorini, L., et al. (2014). Comprehensive measurements of t-channel single top-quark production cross sections at root S=7 TeV with the ATLAS detector. Phys. Rev. D, 90(11), 112006–45pp.
Abstract: This article presents measurements of the t-channel single top-quark ((t) over bart) and top-antiquark ( t) total production cross sections sdtq and sd tq, their ratio Rt sdtq= sd tq, and a measurement of the inclusive production cross section sdtq tq in proton-proton collisions at ffiffiffi ps = 7 TeV at the LHC. Differential cross sections for the tq and tq processes are measured as a function of the transverse momentum and the absolute value of the rapidity of t and t, respectively. The analyzed data set was recorded with the ATLAS detector and corresponds to an integrated luminosity of 4.59 fb-1. Selected events contain one charged lepton, large missing transverse momentum, and two or three jets. The cross sections are measured by performing a binned maximum-likelihood fit to the output distributions of neural networks. The resulting measurements are sdtq 46 = 1dstat = 6dsyst pb, sd tq = 23 +/- 1dstat = 3dsyst pb, Rt = 2.04 0.13dstat +/-=0.12dsyst, and sdtq tq = 68 +/-= 2dstat = 8dsyst pb, consistent with the Standard Model expectation. The uncertainty on the measured cross sections is dominated by systematic uncertainties, while the uncertainty on Rt is mainly statistical. Using the ratio of sdtq tq_ to its theoretical prediction, and assuming that the top-quark-related CKM matrix elements obey the relation jVtbj = jVtsj; jVtdj, we determine jVtbj = 1.02 = 0.07.
|
|
|
Liang, W. H., & Oset, E. (2014). B-0 and B-s(0) decays into J/psi f(0)(980) and J/psi f(0)(500) and the nature of the scalar resonances. Phys. Lett. B, 737, 70–74.
Abstract: We describe the B-0 and B-s(0) decays into J/psi f(0)(500) and J/psi f(0)(980) by taking into account the dominant process for the weak decay of B-0 and B-s(0) into J/psi and a q (q) over bar component. After hadronization of this q (q) over bar component into pairs of pseudoscalar mesons we obtain certain weights for the meson-meson components and allow them to interact among themselves. The final state interaction of the meson-meson components, described in terms of chiral unitary theory, gives rise to the f(0)(980) and f(0)(500) resonances and we can obtain the pi(+)pi(-) invariant mass distributions after the decay of the resonances, which allows us to compare directly to the experiments. We obtain ratios of J/psi f(0)(980) and J/psi f(0)( 500) for each of the B decays in quantitative agreement with experiment, with the f(0)(980) clearly dominant in the B-s(0) decay and the f(0)(500) in the B-0 decay.
|
|
|
LHCb Collaboration(Aaij, R. et al), Martinez-Vidal, F., Oyanguren, A., Ruiz Valls, P., & Sanchez Mayordomo, C. (2014). Effective lifetime measurements in the B-s(0) -> K+K-, B-0 -> K+pi(-) and B-s(0) -> pi K-+(-) decays. Phys. Lett. B, 736, 446–454.
Abstract: Measurements of the effective lifetimes in the B-s(0) -> K+K-, B-0 -> K+pi(-) and B-s(0) -> pi K-+(-) decays are presented using 1.0 fb(-1)of pp collision data collected at a centre-of-mass energy of 7 TeV by the LHCb experiment. The analysis uses a data-driven approach to correct for the decay time acceptance. The measured effective lifetimes are tau(Bs0 -> K+K-) = 1.407 +/- 0.016 (stat) +/- 0.007 (syst) ps, tau(Bs0 -> K+pi-) = 1.524 +/- 0.011 (stat) +/- 0.004 (syst) ps, tau(Bs0 ->pi+K-) = 1.60 +/- 0.06 (stat) +/- 0.01 (syst) ps. This is the most precise determination to date of the effective lifetime in the B-s(0) -> K+K- decay and provides constraints on contributions from physics beyond the Standard Model to the B-s(0) mixing phase and the width difference Delta Gamma(s).
|
|
|
n_TOF Collaboration(Zugec, P. et al), Domingo-Pardo, C., Giubrone, G., & Tain, J. L. (2014). GEANT4 simulation of the neutron background of the C6D6 set-up for capture studies at n_TOF. Nucl. Instrum. Methods Phys. Res. A, 760, 57–67.
Abstract: The neutron sensitivity of the Cr6D6 detector setup used at nTOF facility for capture measurements has been studied by means of detailed GEANT4 simulations. A realistic software replica of the entire nTOF experimental hall, including the neutron beam line, sample, detector supports and the walls of the experimental area has been implemented in the simulations. The simulations have been analyzed in the same manner as experimental data, in particular by applying the Pulse Height Weighting Technique. The simulations have been validated against a measurement of the neutron background performed with a(nat)-C sample, showing an excellent agreement above 1 keV. At lower energies, an additional component in the measured C-nat yield has been discovered, which prevents the use of C-nat data for neutron background estimates at neutron energies below a few hundred eV. The origin and time structure of the neutron background have been derived from the simulations. Examples of the neutron background for two different samples are demonstrating the important role of accurate simulations of the neutron background in capture cross-section measurements.
|
|
|
LHCb Collaboration(Aaij, R. et al), Martinez-Vidal, F., Oyanguren, A., Ruiz Valls, P., & Sanchez Mayordomo, C. (2014). Test of lepton universality using B+ -> K(+)l(+)l(-) decays. Phys. Rev. Lett., 113(15), 151601–10pp.
Abstract: A measurement of the ratio of the branching fractions of the B+ -> K+mu(+)mu(-) and B+ -> K(+)e(+)e(-) decays is presented using proton-proton collision data, corresponding to an integrated luminosity of 3.0 fb(-1), recorded with the LHCb experiment at center-of-mass energies of 7 and 8 TeV. The value of the ratio of branching fractions for the dilepton invariant mass squared range 1 < q(2) < 6 GeV2/c(4) is measured to be 0.745(-0.074)(+0.090)(stat) +/- 0.036(syst). This value is the most precise measurement of the ratio of branching fractions to date and is compatible with the standard model prediction within 2.6 standard deviations.
|
|
|
Bevan, A. J. et al, Martinez-Vidal, F., Pich, A., Azzolini, V., Bernabeu, J., Lopez-March, N., et al. (2014). The Physics of the B Factories. Eur. Phys. J. C, 74(11), 3026–916pp.
|
|
|
Racker, J., & Rius, N. (2014). Helicitogenesis: WIMPy baryogenesis with sterile neutrinos and other realizations. J. High Energy Phys., 11(11), 163–19pp.
Abstract: We propose a mechanism for baryogenesis from particle decays or annihilations that can work at the TeV scale. Some heavy particles annihilate or decay into a heavy sterile neutrino N (with M greater than or similar to 0.5 TeV) and a “light” one nu (with m << 100 GeV), generating an asymmetry among the two helicity degrees of freedom of nu. This asymmetry is partially transferred to Standard Model leptons via fast Yukawa interactions and reprocessed into a baryon asymmetry by the electroweak sphalerons. We illustrate this mechanism in a WIMPy baryogenesis model where the helicity asymmetry is generated in the annihilation of dark matter. This model connects the baryon asymmetry, dark matter, and neutrino masses. Moreover it also complements previous studies on general requirements for baryogenesis from dark matter annihilation. Finally we discuss other possible realizations of this helicitogenesis mechanism.
|
|
|
Babichev, E., & Fabbri, A. (2014). Rotating black holes in massive gravity. Phys. Rev. D, 90(8), 084019–7pp.
Abstract: We present a solution for rotating black holes in massive gravity. We first give a solution of massive gravity with one dynamical metric. Both metrics of this solution are expressed in the advanced Eddington-Finkelstein-like coordinates: the physical metric has the original Kerr line element, while the fiducial metric is flat, but written in a rotating Eddington-Finkelstein form. For the bigravity theory we give an analogue of this solution: the two metrics have the original Kerr form, but, in general, different black hole masses. The generalization of the solution to include the electric charge is also given; it is an analogue of the Kerr-Newman solution in general relativity. We also discuss further possible ways to generalize the solutions.
|
|
|
ATLAS Collaboration(Aad, G. et al), Cabrera Urban, S., Castillo Gimenez, V., Costa, M. J., Ferrer, A., Fiorini, L., et al. (2014). Measurement of the t(t)over-bar production cross-section using e μevents with b-tagged jets in pp collisions at root s=7 and 8 TeV with the ATLAS detector. Eur. Phys. J. C, 74(10), 3109–32pp.
Abstract: The inclusive top quark pair (t (t) over tilde) production cross-section sigma(t (t) over bar) has been measured in proton-proton collisions at root s = 7 TeV and root s = 8 TeV with the ATLAS experiment at the LHC, using t (t) over bar events with an opposite-charge e μpair in the final state. The measurement was performed with the 2011 7 TeV dataset corresponding to an integrated luminosity of 4.6 fb(-1) and the 2012 8 TeV dataset of 20.3 fb(-1). The numbers of events with exactly one and exactly two b-tagged jets were counted and used to simultaneously determine sigma(t (t) over bar) and the efficiency to reconstruct and b-tag a jet from a top quark decay, thereby minimising the associated systematic uncertainties. The cross-section was measured to be: sigma(t (t) over bar) = 182.9 +/- 3.1 +/- 4.2 +/- 3.6 +/- 3.3 pb (root s = 7 TeV) and sigma(t (t) over bar) = 242.4 +/- 1.7 +/- 5.5 +/- 7.5 +/- 4.2 pb (root s = 8 TeV), where the four uncertainties arise from data statistics, experimental and theoretical systematic effects, knowledge of the integrated luminosity and of the LHC beam energy. The results are consistent with recent theoretical QCD calculations at next-to-next-to-leading order. Fiducial measurements corresponding to the experimental acceptance of the leptons are also reported, together with the ratio of cross-sections measured at the two centre-of-mass energies. The inclusive cross-section results were used to determine the top quark pole mass via the dependence of the theoretically predicted cross-section on m(t)(pole) giving a result of m(t)(pole) = 172.9(-2.6)(+2.5) GeV. By looking for an excess of t (t) over bar production with respect to the QCD prediction, the results were also used to place limits on the pair-production of supersymmetric top squarks (t) over tilde (1) with masses close to the top quarkmass, decaying via (t) over tilde (1) -> t (chi) over tilde (0)(1) 1 to predominantly right-handed top quarks and a light neutralino (chi) over tilde (0)(1) 1, the lightest supersymmetric particle. Top squarks with masses between the top quark mass and 177 GeV are excluded at the 95% confidence level.
|
|
|
Gonzalez, P. (2014). Generalized screened potential model. J. Phys. G, 41(9), 095001–12pp.
Abstract: A new non relativistic quark model to calculate the spectrum of heavy quark mesons is developed. The model is based on an interquark potential interaction that implicitly incorporates screening effects from meson-meson configurations. An analysis of the bottomonium spectrum shows the appearance of extra states as compared to conventional non screened potential models.
|
|