|
ATLAS Collaboration(Aad, G. et al), Aikot, A., Amos, K. R., Aparisi Pozo, J. A., Bailey, A. J., Bouchhar, N., et al. (2023). Measurement of the B0s → μμ effective lifetime with the ATLAS detector. J. High Energy Phys., 09(9), 199–32pp.
Abstract: This paper reports the first ATLAS measurement of the B-s(0) -> μμeffective lifetime. The measurement is based on the data collected in 2015-2016, amounting to 26.3 fb(-1) of 13TeV LHC proton-proton collisions. The proper decay-time distribution of 58 +/- 13 background-subtracted signal candidates is fit with simulated signal templates parameterised as a function of the B-s(0) effective lifetime, with statistical uncertainties extracted through a Neyman construction. The resulting effective measurement of the B-s(0) -> μμlifetime is 0.99(-0.07)(+0.42) (stat.) +/- 0.17 (syst.) ps and it is found to be consistent with the Standard Model.
|
|
|
KM3NeT Collaboration(Aiello, S. et al), Alves Garre, S., Calvo, D., Carretero, V., Garcia Soto, A., Gozzini, S. R., et al. (2024). Embedded software of the KM3NeT central logic board. Comput. Phys. Commun., 296, 109036–15pp.
Abstract: The KM3NeT Collaboration is building and operating two deep sea neutrino telescopes at the bottom of the Mediterranean Sea. The telescopes consist of latices of photomultiplier tubes housed in pressure-resistant glass spheres, called digital optical modules and arranged in vertical detection units. The two main scientific goals are the determination of the neutrino mass ordering and the discovery and observation of high-energy neutrino sources in the Universe. Neutrinos are detected via the Cherenkov light, which is induced by charged particles originated in neutrino interactions. The photomultiplier tubes convert the Cherenkov light into electrical signals that are acquired and timestamped by the acquisition electronics. Each optical module houses the acquisition electronics for collecting and timestamping the photomultiplier signals with one nanosecond accuracy. Once finished, the two telescopes will have installed more than six thousand optical acquisition nodes, completing one of the more complex networks in the world in terms of operation and synchronization. The embedded software running in the acquisition nodes has been designed to provide a framework that will operate with different hardware versions and functionalities. The hardware will not be accessible once in operation, which complicates the embedded software architecture. The embedded software provides a set of tools to facilitate remote manageability of the deployed hardware, including safe reconfiguration of the firmware. This paper presents the architecture and the techniques, methods and implementation of the embedded software running in the acquisition nodes of the KM3NeT neutrino telescopes. Program summary Program title: Embedded software for the KM3NeT CLB CPC Library link to program files: https://doi.org/10.17632/s847hpsns4.1 Licensing provisions: GNU General Public License 3 Programming language: C Nature of problem: The challenge for the embedded software in the KM3NeT neutrino telescope lies in orchestrating the Digital Optical Modules (DOMs) to achieve the synchronized data acquisition of the incoming optical signals. The DOMs are the crucial component responsible for capturing neutrino interactions deep underwater. The embedded software must configure and precisely time the operation of each DOM. Any deviation or timing mismatch could compromise data integrity, undermining the scientific value of the experiment. Therefore, the embedded software plays a critical role in coordinating, synchronizing, and operating these modules, ensuring they work in unison to capture and process neutrino signals accurately, ultimately advancing our understanding of fundamental particles in the Universe. Solution method: The embedded software on the DOMs provides a solution based on a C-based bare-metal application, operating without a real-time embedded OS. It is loaded into the RAM during FPGA configuration, consuming less than 256 kB of RAM. The software architecture comprises two layers: system software and application. The former offers OS-like features, including a multitasking scheduler, firmware updates, peripheral drivers, a UDP-based network stack, and error handling utilities. The application layer contains a state machine ensuring consistent program states. It is navigated via slow control events, including external inputs and autonomous responses. Subsystems within the application code control specific acquisition electronics components via the associated driver abstractions. Additional comments including restrictions and unusual features: Due to the operation conditions of the neutrino telescope, where access is restricted, the embedded software implements a fail-safe procedure to reconfigure the firmware where the embedded software runs.
|
|
|
Angles-Castillo, A., Perez, A., & Roldan, E. (2024). Bright and dark solitons in a photonic nonlinear quantum walk: lessons from the continuum. New J. Phys., 26(2), 023004–16pp.
Abstract: We propose a nonlinear quantum walk model inspired in a photonic implementation in which the polarization state of the light field plays the role of the coin-qubit. In particular, we take profit of the nonlinear polarization rotation occurring in optical media with Kerr nonlinearity, which allows to implement a nonlinear coin operator, one that depends on the state of the coin-qubit. We consider the space-time continuum limit of the evolution equation, which takes the form of a nonlinear Dirac equation. The analysis of this continuum limit allows us to gain some insight into the existence of different solitonic structures, such as bright and dark solitons. We illustrate several properties of these solitons with numerical calculations, including the effect on them of an additional phase simulating an external electric field.
|
|
|
ATLAS Collaboration(Aad, G. et al), Aikot, A., Amos, K. R., Aparisi Pozo, J. A., Bailey, A. J., Bouchhar, N., et al. (2024). Performance and calibration of quark/gluon-jet taggers using 140 fb-1 of pp collisions at √s=13 TeV with the ATLAS detector. Chin. Phys. C, 48(2), 023001–25pp.
Abstract: The identification of jets originating from quarks and gluons, often referred to as quark/gluon tagging, plays an important role in various analyses performed at the Large Hadron Collider, as Standard Model measurements and searches for new particles decaying to quarks often rely on suppressing a large gluon-induced background. This paper describes the measurement of the efficiencies of quark/gluon taggers developed within the ATLAS Collaboration, using root s = 13 TeV proton-proton collision data with an integrated luminosity of 140 fb(-1) collected by the ATLAS experiment. Two taggers with high performances in rejecting jets from gluon over jets from quarks are studied: one tagger is based on requirements on the number of inner-detector tracks associated with the jet, and the other combines several jet substructure observables using a boosted decision tree. A method is established to determine the quark/gluon fraction in data, by using quark/gluon-enriched subsamples defined by the jet pseudorapidity. Differences in tagging efficiency between data and simulation are provided for jets with transverse momentum between 500 GeV and 2 TeV and for multiple tagger working points.
|
|
|
LHCb Collaboration(Aaij, R. et al), Jaimes Elles, S. J., Jashal, B. K., Martinez-Vidal, F., Oyanguren, A., Rebollo De Miguel, M., et al. (2023). Observation of the decays B(s)0 → Ds1(2536)∓ K±. J. High Energy Phys., 10(10), 106–25pp.
Abstract: This paper reports the observation of the decays B-(s)(0) -> D-s1(2536)K--/+(+/-) using proton-proton collision data collected by the LHCb experiment, corresponding to an integrated luminosity of 9 fb(-1). The branching fractions of these decays are measured relative to the normalisation channel B-0 -> (D) over bar (K+K-)-K-0. The D-s1(2536)(-) meson is reconstructed in the (D) over bar*(2007)K-0(-) decay channel and the products of branching fractions are measured to be B(B-s(0) -> D-s1(2536)K--/+(+/-)) x B(D-s1(2536)(-) -> D ($) over bar*(2007)K-0(-)) = (2.49 +/- 0.11 +/- 0.12 +/- 0.25 +/- 0.06) x 10(-5), B(B-0 -> D-s1(2536)K--/+(+/-) ) x B(D-s1(2536)(-) -> (D) over bar*(2007)K-0(-)) = (0.510 +/- 0.021 +/- 0.036 +/- 0.050) x 10(-5). The first uncertainty is statistical, the second systematic, and the third arises from the uncertainty of the branching fraction of the B-0 -> (D) over bar (K+K-)-K-0 normalisation channel. The last uncertainty in the B-s(0) result is due to the limited knowledge of the fragmentation fraction ratio, f(s)/f(d). The significance for the B-s(0) and B-0 signals is larger than 10 sigma. The ratio of the helicity amplitudes which governs the angular distribution of the D-s1(2536)(-) -> (D) over bar*(2007)K-0(-) decay is determined from the data. The ratio of the S- and D-wave amplitudes is found to be 1.11 +/- 0.15 +/- 0.06 and the phase difference between them 0.70 +/- 0.09 +/- 0.04 rad, where the first uncertainty is statistical and the second systematic.
|
|