Drach, V., Fritzsch, P., Rago, A., & Romero-Lopez, F. (2022). Singlet channel scattering in a composite Higgs model on the lattice. Eur. Phys. J. C, 82(1), 47–10pp.
Abstract: We present the first calculation of the scattering amplitude in the singlet channel beyond QCD. The calculation is performed in SU(2) gauge theory with N-f = 2 fundamental Dirac fermions and based on a finite-volume scattering formalism. The theory exhibits a SU (4) -> Sp(4) chiral symmetry breaking pattern that is used to design minimal composite Higgs models currently tested at the LHC. Our results show that, for the range of underlying fermion mass considered, the lowest flavour singlet state is stable.
|
Song, T., Berrehrah, H., Torres-Rincon, J. M., Tolos, L., Cabrera, D., Cassing, W., et al. (2017). Single electrons from heavy-flavor mesons in relativistic heavy-ion collisions. Phys. Rev. C, 96(1), 014905–18pp.
Abstract: We study the single electron spectra from D- and B-meson semileptonic decays in Au + Au collisions at root s(NN) = 200, 62.4, and 19.2 GeV by employing the parton-hadron-string dynamics (PHSD) transport approach that has been shown to reasonably describe the charm dynamics at Relativistic Heavy Ion Collider and Large Hadron Collider energies on a microscopic level. In this approach the initial charm and bottom quarks are produced by using the PYTHIA event generator which is tuned to reproduce the fixed-order next-to-leading logarithm calculations for charm and bottom production. The produced charm and bottom quarks interact with off-shell (massive) partons in the quark-gluon plasma with scattering cross sections which are calculated in the dynamical quasiparticle model that is matched to reproduce the equation of state of the partonic system above the deconfinement temperature T-c. At energy densities close to the critical energy density (approximate to 0.5 GeV/fm(3)) the charm and bottom quarks are hadronized intoD and B mesons through either coalescence or fragmentation. After hadronization the D and B mesons interact with the light hadrons by employing the scattering cross sections from an effective Lagrangian. The final D and B mesons then produce single electrons through semileptonic decay. We find that the PHSD approach well describes the nuclear modification factor R-AA and elliptic flow upsilon(2) of single electrons in d + Au and Au + Au collisions at root s(NN) = 200 GeV and the elliptic flow in Au + Au reactions at root s(NN) = 62.4 GeV from the PHENIX Collaboration, however, the large RAA at root s(NN) = 62.4 GeV is not described at all. Furthermore, we make predictions for the RAA of D mesons and of single electrons at the lower energy of root s(NN) = 19.2 GeV. Additionally, the medium modification of the azimuthal angle phi between a heavy quark and a heavy antiquark is studied. We find that the transverse flow enhances the azimuthal angular distributions close to phi = 0 because the heavy flavors strongly interact with nuclear medium in relativistic heavy-ion collisions and almost flow with the bulk matter.
|
T2K Collaboration(Abe, K. et al), Antonova, M., Cervera-Villanueva, A., & Novella, P. (2020). Simultaneous measurement of the muon neutrino charged-current cross section on oxygen and carbon without pions in the final state at T2K. Phys. Rev. D, 101(11), 112004–32pp.
Abstract: This paper reports the first simultaneous measurement of the double differential muon neutrino chargedcurrent cross section on oxygen and carbon without pions in the final state as a function of the outgoing muon kinematics, made at the ND280 off-axis near detector of the T2K experiment. The ratio of the oxygen and carbon cross sections is also provided to help validate various models' ability to extrapolate between carbon and oxygen nuclear targets, as is required in T2K oscillation analyses. The data are taken using a neutrino beam with an energy spectrum peaked at 0.6 GeV. The extracted measurement is compared with the prediction from different Monte Carlo neutrino-nucleus interaction event generators, showing particular model separation for very forward-going muons. Overall, of the models tested, the result is best described using local Fermi gas descriptions of the nuclear ground state with RPA suppression.
|
Morales, A. I. et al, Algora, A., Rubio, B., Orrigo, S. E. A., Agramunt, J., Gelletly, W., et al. (2017). Simultaneous investigation of the T=1(J(pi)=0(+)) and T=0(J(pi)=9(+)) beta decays in Br-70. Phys. Rev. C, 95(6), 064327–11pp.
Abstract: The beta decay of the odd-odd nucleus Br-70 has been investigated with the BigRIPS and EURICA setups at the Radioactive Ion Beam Factory (RIBF) of the RIKEN Nishina Center. The T = 0(J(pi) = 9(+)) and T = 1(J(pi) = 0(+)) isomers have both been produced in in-flight fragmentation of Kr-78 with ratios of 41.6(8)% and 58.4(8)%, respectively. A half-life of t(1/2) = 2157(-49)(+53) ms has been measured for the J pi = 9(+) isomer from gamma-ray time decay analysis. Based on this result, we provide a new value of the half-life for the J pi = 0(+) ground state of Br-70, t(1/2) = 78.42 +/- 0.51 ms, which is slightly more precise, and in excellent agreement, with the best measurement reported hitherto in the literature. For this decay, we provide the first estimate of the total branching fraction decaying through the 2(1)(+) state in the daughter nucleus Se-70, R(2(1)(+)) = 1.3 +/- 1.1%. We also report four new low-intensity gamma-ray transitions at 661, 1103, 1561, and 1749 keV following the beta decay of the J pi = 9(+) isomer. Based on their coincidence relationships, we tentatively propose two new excited states at 3945 and 4752 keV in 70Se with most probable spins and parities of J(pi) = (6(+)) and (8(+)), respectively. The observed structure is interpreted with the help of shell-model calculations, which predict a complex interplay between oblate and prolate configurations at low excitation energies.
|
IDS Collaboration(Stryjczyk, M. et al.), & Nacher, E. (2023). Simultaneous gamma-ray and electron spectroscopy of 182,184,186Hg isotopes. Phys. Rev. C, 108(1), 014308–20pp.
Abstract: Background: The mercury isotopes around N = 104 are a well-known example of nuclei exhibiting shape coex-istence. Mixing of configurations can be studied by measuring the monopole strength rho^2(E0), however, currently the experimental information is scarce and lacks precision, especially for the I^pi -> I^pi (I not = 0) transitions. Purpose: The goals of this study were to increase the precision of the known branching ratios and internal conversion coefficients, to increase the amount of available information regarding excited states in 182,184,186Hg, and to interpret the results in the framework of shape coexistence using different models. Method: The low-energy structures in 182,184,186Hg were populated in the & beta; decay of 182,184,186Tl, produced at ISOLDE, CERN and purified by laser ionization and mass separation. The & gamma;-ray and internal conversion electron events were detected by five germanium clover detectors and a segmented silicon detector, respectively, and correlated in time to build decay schemes.Results: In total, 193, 178, and 156 transitions, including 144, 140, and 108 observed for the first time in a & beta;-decay experiment, were assigned to 182,184,186Hg, respectively. Internal conversion coefficients were determined for 23 transitions, out of which 12 had an E0 component. Extracted branching ratios allowed the sign of the interference term in 182Hg as well as & rho;2(E 0; 0+2 & RARR; 0+1 ) and B(E2; 0+2 & RARR; 2+1 ) in 184Hg to be determined. By means of electron-electron coincidences, the 0+3 state was identified in 184Hg. The experimental results were qualitatively reproduced by five theoretical approaches, the interacting boson model with configuration mixing with two different parametrizations, the general Bohr Hamiltonian, the beyond mean-field model, and the symmetry-conserving configuration-mixing model. However, a quantitative description is lacking. Conclusions: The presence of shape coexistence in neutron-deficient mercury isotopes was confirmed and evidence for the phenomenon existing at higher energies was found. The new experimental results provide important spectroscopic input for future Coulomb excitation studies.
|
Lerendegui-Marco, J., Babiano-Suarez, V., Balibrea-Correa, J., Caballero, L., Calvo, D., Ladarescu, I., et al. (2024). Simultaneous Gamma-Neutron Vision device: a portable and versatile tool for nuclear inspections. EPJ Tech. Instrum., 11(1), 2–17pp.
Abstract: This work presents GN-Vision, a novel dual gamma-ray and neutron imaging system, which aims at simultaneously obtaining information about the spatial origin of gamma-ray and neutron sources. The proposed device is based on two position sensitive detection planes and exploits the Compton imaging technique for the imaging of gamma-rays. In addition, spatial distributions of slow- and thermal-neutron sources (<100 eV) are reconstructed by using a passive neutron pin-hole collimator attached to the first detection plane. The proposed gamma-neutron imaging device could be of prime interest for nuclear safety and security applications. The two main advantages of this imaging system are its high efficiency and portability, making it well suited for nuclear applications were compactness and real-time imaging is important. This work presents the working principle and conceptual design of the GN-Vision system and explores, on the basis of Monte Carlo simulations, its simultaneous gamma-ray and neutron detection and imaging capabilities for a realistic scenario where a Cf-252 source is hidden in a neutron moderating container.
|
LHCb Collaboration(Aaij, R. et al), Jashal, B. K., Martinez-Vidal, F., Oyanguren, A., Remon Alepuz, C., & Ruiz Vidal, J. (2021). Simultaneous determination of CKM angle gamma and charm mixing parameters. J. High Energy Phys., 12(12), 141–32pp.
Abstract: A combination of measurements sensitive to the CP violation angle gamma of the Cabibbo-Kobayashi-Maskawa unitarity triangle and to the charm mixing parameters that describe oscillations between D-0 and (D) over bar (0) mesons is performed. Results from the charm and beauty sectors, based on data collected with the LHCb detector at CERN's Large Hadron Collider, are combined for the first time. This method provides an improvement on the precision of the charm mixing parameter y by a factor of two with respect to the current world average. The charm mixing parameters are determined to be x = (0.400(-0.053)(+0.052))% and y = (0.630(-0.030)(+0.033))%. The angle gamma is found to be gamma = (65.4(-4.2)(+3.8))degrees and is the most precise determination from a single experiment.
|
Azevedo, C. D. R., Baeza, A., Chauveau, E., Corbacho, J. A., Diaz, J., Domange, J., et al. (2020). Simulation results of a real-time in water tritium monitor. Nucl. Instrum. Methods Phys. Res. A, 982, 164555–7pp.
Abstract: In this work we present simulation results for a modular tritium in-water real-time monitor. The system allows for scalability in order to achieve the required sensitivity. The modules are composed by 340 uncladed scintillating fibers immersed in water and 2 photosensors in coincidence for light readout. Light yield and Birks' coefficient uncertainties for low energy beta particles is discussed. A study of the detection efficiency according to the fiber length is presented. Discussion on the system requirements and background mitigation for a device with sensitivity of 100 Bq/L, required to comply with the European directive 2013/51/Euratom, is presented. Due to the low energetic beta emission from tritium a detection efficiency close to 3.3% was calculated for a single 2 mm round fiber.
|
Labiche, M., Ljungvall, J., Crespi, F. C. L., Chen, S., Bordes, J., Goasduff, A., et al. (2023). Simulation of the AGATA spectrometer and coupling with ancillary detectors. Eur. Phys. J. A, 59(7), 158–12pp.
Abstract: The design study of the AGATA array began with the development of the AGATA simulation code using GEANT4. The latter played a key part in the final design of the array and provided a cost effective solution for the early development of the tracking algorithm. The code has since been maintained and developed by the collaboration to provide more realistic simulations, with reaction chambers, ancillary detectors and surrounding mechanical structures completing the entire setup.
|
Martin-Luna, P., Esperante, D., Prieto, A. F., Fuster-Martinez, N., Rivas, I. G., Gimeno, B., et al. (2024). Simulation of electron transport and secondary emission in a photomultiplier tube and validation. Sens. Actuator A-Phys., 365, 114859–10pp.
Abstract: The electron amplification and transport within a photomultiplier tube (PMT) has been investigated by developing an in-house Monte Carlo simulation code. The secondary electron emission in the dynodes is implemented via an effective electron model and the Modified Vaughan's model, whereas the transport is computed with the Boris leapfrog algorithm. The PMT gain, rise time and transit time have been studied as a function of supply voltage and external magnetostatic field. A good agreement with experimental measurements using a Hamamatsu R13408-100 PMT was obtained. The simulations have been conducted following different treatments of the underlying geometry: three-dimensional, two-dimensional and intermediate (2.5D). The validity of these approaches is compared. The developed framework will help in understanding the behavior of PMTs under highly intense and irregular illumination or varying external magnetic fields, as in the case of prompt gamma-ray measurements during pencil-beam proton therapy; and aid in optimizing the design of voltage dividers with behavioral circuit models.
|