|
|
Ruhr, F. et al, Escobar, C., & Miñano, M. (2020). Testbeam studies of barrel and end-cap modules for the ATLAS ITk strip detector before and after irradiation. Nucl. Instrum. Methods Phys. Res. A, 979, 164430–6pp.
Abstract: In order to cope with the occupancy and radiation doses expected at the High-Luminosity LHC, the ATLAS experiment will replace its Inner Detector with an all-silicon Inner Tracker (ITk), consisting of pixel and strip subsystems. In the last two years, several prototype ITk strip modules have been tested using beams of high energy electrons produced at the DESY-II testbeam facility. Tracking was provided by EUDET telescopes. The modules tested are built from two sensor types: the rectangular ATLAS17LS, which will be used in the outer layers of the central barrel region of the detector, and the annular ATLAS12EC, which will be used in the innermost ring (R0) of the forward region. Additionally, a structure with two RO modules positioned back-to-back has been measured, demonstrating space point reconstruction using the stereo angle of the strips. Finally, one barrel and one RO module have been measured after irradiation to 40% beyond the expected end-of-lifetime fluence. The data obtained allow for thorough tests of the module performance, including charge collection, noise occupancy, detection efficiency, and tracking performance. The results give confidence that the ITk strip detector will meet the requirements of the ATLAS experiment.
|
|
|
|
Brook, N. H., Castillo Garcia, L., Conneely, T. M., Cussans, D., van Dijk, M. W. U., Fohl, K., et al. (2018). Testbeam studies of a TORCH prototype detector. Nucl. Instrum. Methods Phys. Res. A, 908, 256–268.
Abstract: TORCH is a novel time-of-flight detector that has been developed to provide charged-particle identification between 2 and 10 GeV/c momentum. TORCH combines arrival times from multiple Cherenkov photons produced within a 10 mm-thick quartz radiator plate, to achieve a 15 ps time-of-flight resolution per incident particle. A customised Micro-Channel Plate photomultiplier tube (MCP-PMT) and associated readout system utilises an innovative charge-sharing technique between adjacent pixels to obtain the necessary 70 ps time resolution of each Cherenkov photon. A five-year R&D programme has been undertaken, culminating in the construction of a small-scale prototype TORCH module. In testbeams at CERN, this prototype operated successfully with customised electronics and readout system. A full analysis chain has been developed to reconstruct the data and to calibrate the detector. Results are compared to those using a commercial Planacon MCP-PMT, and single photon resolutions approaching 80 ps have been achieved. The photon counting efficiency was found to be in reasonable agreement with a GEANT4 Monte Carlo simulation of the detector. The small-scale demonstrator is a precursor to a full-scale TORCH module (with a radiator plate of 660 x 1250 x 10 mm(3)), which is currently under construction.
|
|
|
|
Hernandez, P., Kekic, M., Lopez-Pavon, J., Racker, J., & Salvado, J. (2016). Testable baryogenesis is in seesaw models. J. High Energy Phys., 08(8), 157–29pp.
Abstract: We revisit the production of baryon asymmetries in the minimal type I seesaw model with heavy Majorana singlets in the GeV range. In particular we include “washout” effects from scattering processes with gauge bosons, Higgs decays and inverse decays, besides the dominant top scatterings. We show that in the minimal model with two singlets, and for an inverted light neutrino ordering, future measurements from SHiP and neutrinoless double beta decay could in principle provide sufficient information to predict the matter-antimatter asymmetry in the universe. We also show that SHiP measurements could provide very valuable information on the PMNS CP phases.
|
|
|
|
ATLAS Collaboration(Aad, G. et al), Aparisi Pozo, J. A., Bailey, A. J., Cabrera Urban, S., Cardillo, F., Castillo, F. L., et al. (2021). Test of the universality of τ and μ lepton couplings in W-boson decays with the ATLAS detector. Nat. Phys., 17, 813–818.
Abstract: The standard model of particle physics encapsulates our best current understanding of physics at the smallest scales. A fundamental axiom of this theory is the universality of the couplings of the different generations of leptons to the electroweak gauge bosons. The measurement of the ratio of the decay rate of W bosons to t leptons and muons, R(tau/mu), constitutes an important test of this axiom. Using 139 fb(-1) of proton-proton collisions recorded with the ATLAS detector at a centre-of-mass energy of 13 TeV, we report a measurement of this quantity from di-leptonic tt events where the top quarks decay into a W boson and a bottom quark. We can distinguish muons originating from W bosons and those originating from an intermediate t lepton through the muon transverse impact parameter and differences in the muon transverse momentum spectra. The measured value of R(tau/mu) is 0.992 +/- 0.013 [+/- 0.007(stat) +/- 0.011(syst)] and is in agreement with the hypothesis of universal lepton couplings as postulated in the standard model. This is the only such measurement from the Large Hadron Collider, so far, and obtains twice the precision of previous measurements.
|
|
|
|
LHCb Collaboration(Aaij, R. et al), Garcia Martin, L. M., Henry, L., Jashal, B. K., Martinez-Vidal, F., Oyanguren, A., et al. (2020). Test of lepton universality with Lambda(0)(b) -> pK(-) l(+)l(-). J. High Energy Phys., 05(5), 40–27pp.
Abstract: The ratio of branching fractions of the decays -> pK(-)mu(+)mu(-),RpK-1}, is measured for the first time using proton-proton collision data corresponding to an integrated luminosity of 4.7 fb(-1) recorded with the LHCb experiment at center-of-mass energies of 7, 8 and 13 TeV. In the dilepton mass-squared range 0.1 < q(2)< 6.0 GeV2/c(4) and the pK(-) mass range m(pK(-)) < 2600 MeV/c(2), the ratio of branching fractions is measured to be RpK-1=1.17-0.16+0.18 +/- 0.0$$ {R}{pK}<^>{-1}={1.17}{-0.16}<^>{+0.18}\pm 0.07 $$\end{document}, where the first uncertainty is statistical and the second systematic. This is the first test of lepton universality with b baryons and the first observation of the decay -> pK(-)e(+)e(-).
|
|
|
|
LHCb Collaboration(Aaij, R. et al), Garcia Martin, L. M., Henry, L., Martinez-Vidal, F., Oyanguren, A., Remon Alepuz, C., et al. (2017). Test of lepton universality with B-0 -> K*(0)l(+)l(-) decays. J. High Energy Phys., 08(8), 055–31pp.
Abstract: A test of lepton universality, performed by measuring the ratio of the branching fractions of the B-0 -> K*(0)mu(+) mu(-) and B-0 -> K*e(+)e(-) decays, R-K*0, is presented. The K*(0) meson is reconstructed in the final state K+pi(-), which is required to have an invariant mass within 100 MeV/c(2) of the known K*(892)(0) mass. The analysis is performed using proton-proton collision data, corresponding to an integrated luminosity of about 3 fb(-1), collected by the LHCb experiment at centre-of-mass energies of 7 and 8 TeV. The ratio is measured in two regions of the dilepton invariant mass squared, q(2), to be R-K*0 – {0.66(-0.007)(+0.11)(stat) +/- 0.03(syst) for 0.045 < q(2) < GeV2/c(4), 0.69(-0.07)(+0.11)(stat) +/- 0.05(syst) for 1.1 < q(2) < 6.0 GeV2/c(4). The corresponding 95.4% confidence level intervals are [0.52, 0.89] and [0.53, 0.94]. The results, which represent the most precise measurements of R-K*0 to date, are compatible with the Standard Model expectations at the level of 2.1-2.3 and 2.4-2.5 standard deviations in the two q(2) regions, respectively.
|
|
|
|
LHCb Collaboration(Aaij, R. et al), Henry, L., Jashal, B. K., Martinez-Vidal, F., Oyanguren, A., Remon Alepuz, C., et al. (2022). Test of lepton universality in beauty-quark decays. Nat. Phys., 18(3), 277–282.
Abstract: The standard model of particle physics currently provides our best description of fundamental particles and their interactions. The theory predicts that the different charged leptons, the electron, muon and tau, have identical electroweak interaction strengths. Previous measurements have shown that a wide range of particle decays are consistent with this principle of lepton universality. This article presents evidence for the breaking of lepton universality in beauty-quark decays, with a significance of 3.1 standard deviations, based on proton–proton collision data collected with the LHCb detector at CERN's Large Hadron Collider. The measurements are of processes in which a beauty meson transforms into a strange meson with the emission of either an electron and a positron, or a muon and an antimuon. If confirmed by future measurements, this violation of lepton universality would imply physics beyond the standard model, such as a new fundamental interaction between quarks and leptons.
|
|
|
|
LHCb Collaboration(Aaij, R. et al), Jaimes Elles, S. J., Jashal, B. K., Martinez-Vidal, F., Oyanguren, A., Rebollo De Miguel, M., et al. (2023). Test of Lepton Universality in b → sl+l- Decays. Phys. Rev. Lett., 131(5), 051803–13pp.
Abstract: The first simultaneous test of muon-electron universality using B+ -> K(+)l(+)l(-) and B-0 -> K*(0)l(+) l(-) decays is performed, in two ranges of the dilepton invariant-mass squared, q(2). The analysis uses beauty mesons produced in proton-proton collisions collected with the LHCb detector between 2011 and 2018, corresponding to an integrated luminosity of 9 fb(-1). Each of the four lepton universality measurements reported is either the first in the given q(2) interval or supersedes previous LHCb measurements. The results are compatible with the predictions of the Standard Model.
|
|
|
|
LHCb Collaboration(Aaij, R. et al), Jaimes Elles, S. J., Jashal, B. K., Martinez Vidal, F., Oyanguren, A., Rebollo De Miguel, M., et al. (2023). Test of lepton flavor universality using B0→D*−τ+ντ decays with hadronic τ channels. Phys. Rev. D, 108, 012018–18pp.
Abstract: The branching fraction B(B0→D*−τ+ντ) is measured relative to that of the normalization mode B0→D*−π+π−π+ using hadronic τ+→π+π−π+(π0)¯ντ decays in proton-proton collision data at a center-of-mass energy of 13 TeV collected by the LHCb experiment, corresponding to an integrated luminosity of 2 fb−1. The measured ratio is B(B0→D*−τ+ντ)/B(B0→D*−π+π−π+)=1.70±0.10+0.11−0.10, where the first uncertainty is statistical and the second is related to systematic effects. Using established branching fractions for the B0→D*−π+π−π+ and B0→D*−μ+νμ modes, the lepton universality test R(D*−)≡B(B0→D*−τ+ντ)/B(B0→D*−μ+νμ) is calculated, R(D*−)=0.247±0.015±0.015±0.012, where the third uncertainty is due to the uncertainties on the external branching fractions. This result is consistent with the Standard Model prediction and with previous measurements.
|
|
|
|
LHCb Collaboration(Aaij, R. et al), Garcia Martin, L. M., Henry, L., Martinez-Vidal, F., Oyanguren, A., Remon Alepuz, C., et al. (2018). Test of lepton flavor universality by the measurement of the B-0 -> D*(-) tau(+) nu(tau) branching fraction using three-prong tau decays. Phys. Rev. D, 97(7), 072013–26pp.
Abstract: The ratio of branching fractions R(D*(-)) = B(B-0 -> D*(-) tau(+)nu(tau))/(B-0 -> D*(-) mu(+)nu(mu)) is measured using a data sample of proton-proton collisions collected with the LHCb detector at center-of-mass energies of 7 and 8 TeV, corresponding to an integrated luminosity of 3 fb(-1). The tau lepton is reconstructed with three charged pions in the final state. A novel method is used that exploits the different vertex topologies of signal and backgrounds to isolate samples of semitauonic decays of b hadrons with high purity. Using the B-0 -> D*(-) pi(+)pi(-)pi(+) decay as the normalization channel, the ratio B(B-0 -> D*(-) tau(+)nu(tau))/B(B-0 -> D* pi(+)pi(-)pi(+)) is measured to be 1.97 +/- 0.13 +/- 0.18, where the first uncertainty is statistical and the second systematic. An average of branching fraction measurements for the normalization channel is used to derive B(B-0 -> D*(-) tau(+)nu(tau))(_)= (1.42 +/- 0.094 +/- 0.129 +/- 0.054)%, where the third uncertainty is due to the limited knowledge of B(B-0 -> D*(-) pi(+)pi(-)pi(+)). A test of lepton flavor universality is performed using the well- measured branching fraction B(B-0 -> D*(-) mu(+)nu(mu)) to compute R(D*(-))0 = 0.291 +/- 0.019 +/- 0.026 +/- 0.013, where the third uncertainty originates from the uncertainties on B(B-0 -> D*(-) pi(+)pi(-)pi(+)) and B(B-0 -> D*(-) mu(+)nu(mu)) This measurement is in agreement with the Standard Model prediction and with previous measurements.
|
|
