|
ATLAS Collaboration(Aaboud, M. et al), Alvarez Piqueras, D., Bailey, A. J., Barranco Navarro, L., Cabrera Urban, S., Castillo, F. L., et al. (2020). Determination of jet calibration and energy resolution in proton-proton collisions at s=8 TeV using the ATLAS detector. Eur. Phys. J. C, 80(12), 1104–81pp.
Abstract: The jet energy scale, jet energy resolution, and their systematic uncertainties are measured for jets reconstructed with the ATLAS detector in 2012 using proton-proton data produced at a centre-of-mass energy of 8 TeV with an integrated luminosity of 20 fb-1. Jets are reconstructed from clusters of energy depositions in the ATLAS calorimeters using the anti-kt algorithm. A jet calibration scheme is applied in multiple steps, each addressing specific effects including mitigation of contributions from additional proton-proton collisions, loss of energy in dead material, calorimeter non-compensation, angular biases and other global jet effects. The final calibration step uses several in situ techniques and corrects for residual effects not captured by the initial calibration. These analyses measure both the jet energy scale and resolution by exploiting the transverse momentum balance in gamma + jet, Z + jet, dijet, and multijet events. A statistical combination of these measurements is performed. In the central detector region, the derived calibration has a precision better than 1% for jets with transverse momentum 150 GeV<pT< 1500 GeV, and the relative energy resolution is (8.4 +/- 0.6)% for pT=100 GeV and (23 +/- 2)% for pT=20 GeV. The calibration scheme for jets with radius parameter R=1.0, for which jets receive a dedicated calibration of the jet mass, is also discussed.
|
|
|
LHCb Collaboration(Aaij, R. et al), Garcia Martin, L. M., Henry, L., Jashal, B. K., Martinez-Vidal, F., Oyanguren, A., et al. (2020). Measurement of the shape of the B-s(0) -> D-s*(-) mu(+) nu(mu) differential decay rate. J. High Energy Phys., 12(12), 144–32pp.
Abstract: The shape of the B-s(0) -> D-s*mu(+)nu(mu) differential decay rate is obtained as a function of the hadron recoil parameter using proton-proton collision data at a centreof-mass energy of 13TeV, corresponding to an integrated luminosity of 1.7 fb(-1) collected by the LHCb detector. The B-s(0) -> D-s*(-)mu(+)nu(mu) decay is reconstructed through the decays D-s*(-) up arrow D-s(-) gamma and D-s(-) -> K-K+pi(-). The differential decay rate is fitted with the CapriniLellouch-Neubert (CLN) and Boyd-Grinstein-Lebed (BGL) parametrisations of the form factors, and the relevant quantities for both are extracted.
|
|
|
LHCb Collaboration(Aaij, R. et al), Garcia Martin, L. M., Henry, L., Jashal, B. K., Martinez-Vidal, F., Oyanguren, A., et al. (2020). Measurement of branching fraction ratios for B+ -> D*+D-K+, B+ -> D*-D+K+, and B-0 -> (D*-DK+)-K-0 decays. J. High Energy Phys., 12(12), 139–22pp.
Abstract: A measurement of four branching-fraction ratios for three-body decays of B mesons involving two open-charm hadrons in the final state is presented. Run 1 and Run 2 pp collision data are used, recorded by the LHCb experiment at centre-of-mass energies 7, 8, and 13 TeV and corresponding to an integrated luminosity of 9 fb(-1). The measured branching-fraction ratios are<disp-formula id=“Equa”><mml:mtable displaystyle=“true”><mml:mtr><mml:mtd><mml:mfrac>B<mml:mfenced close=“)” open=“(”>B+-> D+D-K+</mml:mfenced>B<mml:mfenced close=“)” open=“(”>B+-> D<overbar></mml:mover>0D0K+</mml:mfenced></mml:mfrac>=0.5170.0150.013 +/- 0.011,</mml:mtd></mml:mtr><mml:mtr><mml:mtd><mml:mfrac>B<mml:mfenced close=“)” open=“(”>B+-> D-D+K+</mml:mfenced>B<mml:mfenced close=“)” open=“(”>B+-> D<overbar></mml:mover>0D0K+</mml:mfenced></mml:mfrac>=0.577 +/- 0.016 +/- 0.013 +/- 0.013,</mml:mtd></mml:mtr><mml:mtr><mml:mtd><mml:mtable><mml:mtr><mml:mtd><mml:mfrac>B<mml:mfenced close=“)” open=“(”>B0 -> D-D0K+</mml:mfenced>B<mml:mfenced close=“)” open=“(”>B0 -> D-D0K+</mml:mfenced></mml:mfrac>=1.754 +/- 0.028 +/- 0.016 +/- 0.035,</mml:mtd></mml:mtr><mml:mtr><mml:mtd><mml:mfrac>B<mml:mfenced close=“)” open=“(”>B+-> D+D-K+</mml:mfenced>B<mml:mfenced close=“)” open=“(”>B+-> D-D+K+</mml:mfenced></mml:mfrac>=0.907 +/- 0.033<mml:mo>+/- 0.014<mml:mo>,</mml:mtd></mml:mtr></mml:mtable></mml:mtd></mml:mtr></mml:mtable><graphic position=“anchor” xmlns:xlink=“http://www.w3.org/1999/xlink” xlink:href=“13130202014428ArticleEqua.gif”></graphic></disp-formula><p id=“Par2”>where the first of the uncertainties is statistical, the second systematic, and the third is due to the uncertainties on the D-meson branching fractions. These are the most accurate measurements of these ratios to date.<fig id=“Figa” position=“anchor”><graphic position=“anchor” specific-use=“HTML” mime-subtype=“JPEG” xmlns:xlink=“http://www.w3.org/1999/xlink” xlink:href=“MediaObjects/13130202014428FigaHTML.jpg” id=“MO1”></graphic
|
|
|
ATLAS Collaboration(Aad, G. et al), Aparisi Pozo, J. A., Bailey, A. J., Cabrera Urban, S., Castillo, F. L., Castillo Gimenez, V., et al. (2020). Alignment of the ATLAS Inner Detector in Run 2. Eur. Phys. J. C, 80(12), 1194–41pp.
Abstract: The performance of the ATLAS Inner Detector alignment has been studied using pp collision data at v s = 13 TeV collected by the ATLAS experiment during Run 2 (2015-2018) of the Large Hadron Collider (LHC). The goal of the detector alignment is to determine the detector geometry as accurately as possible and correct for time-dependent movements. The Inner Detector alignment is based on the minimization of track-hit residuals in a sequence of hierarchical levels, from global mechanical assembly structures to local sensors. Subsequent levels have increasing numbers of degrees of freedom; in total there are almost 750,000. The alignment determines detector geometry on both short and long timescales, where short timescales describe movementswithin anLHCfill. The performance and possible track parameter biases originating from systematic detector deformations are evaluated. Momentum biases are studied using resonances decaying to muons or to electrons. The residual sagitta bias and momentum scale bias after alignment are reduced to less than similar to 0.1 TeV-1 and 0.9 x 10(-3), respectively. Impact parameter biases are also evaluated using tracks within jets.
|
|
|
Nada, A., & Ramos, A. (2021). An analysis of systematic effects in finite size scaling studies using the gradient flow. Eur. Phys. J. C, 81(1), 1–19pp.
Abstract: We propose a new strategy for the determination of the step scaling function sigma (u) in finite size scaling studies using the gradient flow. In this approach the determination of sigma (u) is broken in two pieces: a change of the flow time at fixed physical size, and a change of the size of the system at fixed flow time. Using both perturbative arguments and a set of simulations in the pure gauge theory we show that this approach leads to a better control over the continuum extrapolations. Following this new proposal we determine the running coupling at high energies in the pure gauge theory and re-examine the determination of the Lambda -parameter, with special care on the perturbative truncation uncertainties.
|
|