|
IGISOL Collaboration(Briz, J. A. et al), Algora, A., Tain, J. L., Guadilla, V., Agramunt, J., Estevez, E., et al. (2016). Total absorption spectroscopy of fission fragments relevant for reactor antineutrino spectra determination. Acta Phys. Pol. B, 47(3), 755–762.
Abstract: The contribution of each fission fragment to the reactor antineutrino spectra was determined using the summation method based on the existing information on fission yields and decay data contained in nuclear databases and the reactor evolution code MURE. The beta decay of some of the main contributors has been studied using the Total Absorption Spectroscopy (TAS) technique during two experimental campaigns at the IGISOL facility, in Jyvaskyla (Finland). Results on the decay of Rb-92, the most important contributor in the 4-8 MeV energy region are reported. The status of the analysis of the second experiment is presented as well.
|
|
|
Viñals, S., Nacher, E., Tengblad, O., Borge, M. J. G., Briz, J. A., Gad, A., et al. (2021). Calibration and response function of a compact silicon-detector set-up for charged-particle spectroscopy using GEANT4. Eur. Phys. J. A, 57(2), 49–9pp.
Abstract: A complete methodology for detector calibration and energy-loss correction in charged-particle spectroscopy is presented. This has been applied to a compact set-up of four silicon detectors used for beta-delayed particle spectroscopy. The characterisation of the set-up was carried out using GEANT4 Monte Carlo simulations and standard alpha-calibration sources. The response function of the system was in this way accurately determined to be used for spectral unfolding.
|
|
|
Nacher, E., Briz, J. A., Nerio, A. N., Perea, A., Tavora, V. G., Tengblad, O., et al. (2024). Characterization of a novel proton-CT scanner based on Silicon and LaBr3(Ce) detectors. Eur. Phys. J. Plus, 139(5), 404–9pp.
Abstract: Treatment planning systems at proton-therapy centres entirely use X-ray computed tomography (CT) as primary imaging technique to infer the proton treatment doses to tumour and healthy tissues. However, proton stopping powers in the body, as derived from X-ray images, suffer from important proton-range uncertainties. In order to reduce this uncertainty in range, one could use proton-CT images instead. The main goal of this work is to test the capabilities of a newly-developed proton-CT scanner, based on the use of a set of tracking detectors and a high energy resolution scintillator for the residual energy of the protons. Different custom-made phantoms were positioned at the field of view of the scanner and were irradiated with protons at the CCB proton-therapy center in Krakow. We measured with the phantoms at different angles and produced sinograms that were used to obtain reconstructed images by Filtered Back-Projection. The obtained images were used to determine the capabilities of our scanner in terms of spatial resolution and proton Relative Stopping Power (RSP) mapping and validate its use as proton-CT scanner. The results show that the scanner can produce medium-high quality images, with spatial resolution better than 2 mm in radiography, below 3 mm in tomography and resolving power in the RSP comparable to other state-of-the-art pCT scanners.
|
|
|
Briz, J. A., Nerio, A. N., Ballesteros, C., Borge, M. J. G., Martinez, P., Perea, A., et al. (2022). Proton Radiographs Using Position-Sensitive Silicon Detectors and High-Resolution Scintillators. IEEE Trans. Nucl. Sci., 69(4), 696–702.
Abstract: Proton therapy is a cancer treatment technique currently in growth since it offers advantages with respect to conventional X-ray and gamma-ray radiotherapy. In particular, better control of the dose deposition allowing to reach higher conformity in the treatments causing less secondary effects. However, in order to take full advantage of its potential, improvements in treatment planning and dose verification are required. A new prototype of proton computed tomography scanner is proposed to design more accurate and precise treatment plans for proton therapy. Our prototype is formed by double-sided silicon strip detectors and scintillators of LaBr3(Ce) with high energy resolution and fast response. Here, the results obtained from an experiment performed using a 100-MeV proton beam are presented. Proton radiographs of polymethyl methacrylate (PMMA) samples of 50-mm thickness with spatial patterns in aluminum were taken. Their properties were studied, including reproduction of the dimensions, spatial resolution, and sensitivity to different materials. Structures of up to 2 mm are well resolved and the sensitivity of the system was enough to distinguish the thicknesses of 10 mm of aluminum or PMMA. The spatial resolution of the images was 0.3 line pairs per mm (MTF-10%). This constitutes the first step to validate the device as a proton radiography scanner.
|
|
|
Deo, A. Y., Podolyak, Z., Walker, P. M., Algora, A., Rubio, B., Agramunt, J., et al. (2010). Structures of Po-201 and Rn-205 from EC/beta(+)-decay studies. Phys. Rev. C, 81(2), 024322–8pp.
Abstract: Several low-lying excited states in Rn-205(86)119 and Po-201(84)117 were identified for the first time following EC/beta(+) decay of Fr-205 and At-201, respectively, using gamma-ray and conversion electron spectroscopy at the CERN isotope separator on-line (ISOLDE) facility. The EC/beta(+) branch from Fr-205 was measured to be 1.5(2)%. The excited states of the daughter nuclei are understood in terms of the odd nucleon coupling to the neighboring even-even core. The neutron single-particle energies of the p(3/2) orbital relative to the f(5/2) ground state in Rn-205, and the f(5/2) orbital relative to the p(3/2) ground state in Po-201, were determined to be 31.4(2) and 5.7(3) keV, respectively. We tentatively identify a 13/2(+) isomeric level at 657.1(5) keV in Rn-205. The systematic behavior of the 13/2(+) and 3/2(-) levels is also discussed.
|
|