|
n_TOF Collaboration(Sosnin, N. V. et al.), Babiano-Suarez, V., Caballero, L., Domingo-Pardo, C., Ladarescu, I., & Tain, J. L. (2023). Measurement of the 77Se(n,gamma) cross section up to 200 keV at the n_TOF facility at CERN. Phys. Rev. C, 107(6), 065805–9pp.
Abstract: The 77Se(n,gamma) reaction is of importance for 77Se abundance during the slow neutron capture process in massive stars. We have performed a new measurement of the 77Se radiative neutron capture cross section at the Neutron Time-of-Flight facility at CERN. Resonance capture kernels were derived up to 51 keV and cross sections up to 200 keV. Maxwellian-averaged cross sections were calculated for stellar temperatures between kT = 5 keV and kT = 100 keV, with uncertainties between 4.2% and 5.7%. Our results lead to substantial decreases of 14% and 19% in 77Se abundances produced through the slow neutron capture process in selected stellar models of 15M0 and 2M0, respectively, compared to using previous recommendation of the cross section.
|
|
|
ATLAS Collaboration(Aad, G. et al), Amos, K. R., Aparisi Pozo, J. A., Bailey, A. J., Cabrera Urban, S., Cantero, J., et al. (2023). Search for flavour-changing neutral-current couplings between the top quark and the photon with the ATLAS detector at root s=13 TeV. Phys. Lett. B, 842, 137379–22pp.
Abstract: This letter documents a search for flavour-changing neutral currents (FCNCs), which are strongly sup-pressed in the Standard Model, in events with a photon and a top quark with the ATLAS detector. The analysis uses data collected in pp collisions at & RADIC;s =13 TeV during Run 2 of the LHC, corresponding to an integrated luminosity of 139 fb-1. Both FCNC top-quark production and decay are considered. The final state consists of a charged lepton, missing transverse momentum, a b-tagged jet, one high-momentum photon and possibly additional jets. A multiclass deep neural network is used to classify events either as signal in one of the two categories, FCNC production or decay, or as background. No significant ex-cess of events over the background prediction is observed and 95% CL upper limits are placed on the strength of left-and right-handed FCNC interactions. The 95% CL bounds on the branching fractions for the FCNC top-quark decays, estimated (expected) from both top-quark production and decay, are B(t & RARR; u & gamma; ) < 0.85 (0.88+0.37 -0.25) x 10-5 and B(t & RARR; c & gamma; ) < 4.2 (3.40+1.35-0.95) x 10-5 for a left-handed tq & gamma; cou-pling, and B(t & RARR; u & gamma; ) < 1.2 (1.20+0.50 -0.33) x10-5 and B(t & RARR; c & gamma; ) < 4.5 (3.70+1.47 -1.03) x10-5 for a right-handed coupling.
|
|
|
ATLAS Collaboration(Aad, G. et al), Amos, K. R., Aparisi Pozo, J. A., Bailey, A. J., Cabrera Urban, S., Cantero, J., et al. (2023). Measurement of the nuclear modification factor of b-jets in 5.02 TeV Pb+Pb collisions with the ATLAS detector. Eur. Phys. J. C, 83(5), 438–32pp.
Abstract: This paper presents a measurement of b-jet production in Pb+Pb and pp collisions at root s(NN) = 5.02 TeV with the ATLAS detector at the LHC. The measurement uses 260 pb(-1) of pp collisions collected in 2017 and 1.4 nb(-1) of Pb+Pb collisions collected in 2018. In both collision systems, jets are reconstructed via the anti-kt algorithm. The b-jets are identified from a sample of jets containing muons from the semileptonic decay of b-quarks using template fits of the muon momentum relative to the jet axis. In pp collisions, b-jets are reconstructed for radius parameters R=0.2 and R=0.4, and only R=0.2 jets are used in Pb+Pb collisions. For comparison, inclusive R=0.2 jets are also measured using 1.7 nb(-1) of Pb+Pb collisions collected in 2018 and the same pp collision data as the b-jet measurement. The nuclear modification factor, RAA, is calculated for both b-jets and inclusive jets with R=0.2 over the transverse momentum range of 80-290 GeV. The nuclear modification factor for b-jets decreases from peripheral to central collisions. The ratio of the b-jet RAA to inclusive jet RAA is also presented and suggests that the RAA for b-jets is larger than that for inclusive jets in central Pb+Pb collisions. The measurements are compared with theoretical calculations and suggest a role for mass and colour-charge effects in partonic energy loss in heavy-ion collisions.
|
|
|
ATLAS Collaboration(Aad, G. et al), Amos, K. R., Aparisi Pozo, J. A., Bailey, A. J., Bouchhar, N., Cabrera Urban, S., et al. (2023). Measurement of the total and differential Higgs boson production cross-sections at root s=13 TeV with the ATLAS detector by combining the H -> ZZ(*)-> 4l and H -> gamma gamma decay channels. J. High Energy Phys., 05(5), 028–42pp.
Abstract: The total and differential Higgs boson production cross-sections are measured through a combined statistical analysis of the H -> ZZ(*) -> 4l and H -> gamma gamma decay channels. The results are based on a dataset of 139 fb(-1) of proton-proton collisions at a centre-of-mass energy of 13 TeV, recorded by the ATLAS detector at the Large Hadron Collider. The measured total Higgs boson production cross-section is 55.5(-3.8)(+4.0) pb, consistent with the Standard Model prediction of 55.6 +/- 2.5 pb. All results from the two decay channels are compatible with each other, and their combination agrees with the Standard Model predictions. A combined statistical interpretation of the measured fiducial cross-sections as a function of the Higgs boson transverse momentum is performed in order to probe the Yukawa couplings to the bottom and charm quarks. A similar interpretation is performed by including also the constraints from the measurements of Higgs boson production in association with a W or Z boson in the H -> b (b) over bar and c (c) over bar decay channels.
|
|
|
ATLAS Collaboration(Aad, G. et al), Amos, K. R., Aparisi Pozo, J. A., Bailey, A. J., Cabrera Urban, S., Cantero, J., et al. (2023). Differential t(t)over-tilde cross-section measurements using boosted top quarks in the all-hadronic final state with 139 fb(-1) of ATLAS data. J. High Energy Phys., 04(4), 080–108pp.
Abstract: Measurements of single-, double-, and triple-differential cross-sections are presented for boosted top-quark pair-production in 13 TeV proton-proton collisions recorded by the ATLAS detector at the LHC. The top quarks are observed through their hadronic decay and reconstructed as large-radius jets with the leading jet having transverse momentum (p(T)) greater than 500 GeV. The observed data are unfolded to remove detector effects. The particle-level cross-section, multiplied by the t (t) over bar branching fraction and measured in a fiducial phase space defined by requiring the leading and second-leading jets to have p(T)> 500 GeV and p(T)> 350 GeV, respectively, is 331 +/- 3(stat.) +/- 39(syst.) fb. This is approximately 20% lower than the prediction of 398(-49)(+48) fb by Powheg+Pythia 8 with next-to-leading-order (NLO) accuracy but consistent within the theoretical uncertainties. Results are also presented at the parton level, where the effects of top-quark decay, parton showering, and hadronization are removed such that they can be compared with fixed-order next-to-next-to-leading-order (NNLO) calculations. The parton-level cross-section, measured in a fiducial phase space similar to that at particle level, is 1.94 +/- 0.02(stat.) +/- 0.25(syst.) pb. This agrees with the NNLO prediction of 1.96(-0.17)(+0.02) pb. Reasonable agreement with the differential cross-sections is found for most NLO models, while the NNLO calculations are generally in better agreement with the data. The differential cross-sections are interpreted using a Standard Model effective field-theory formalism and limits are set on Wilson coefficients of several four-fermion operators.
|
|
|
Borja-Lloret, M., Barrientos, L., Bernabeu, J., Lacasta, C., Muñoz, E., Ros, A., et al. (2023). Influence of the background in Compton camera images for proton therapy treatment monitoring. Phys. Med. Biol., 68(14), 144001–16pp.
Abstract: Objective. Background events are one of the most relevant contributions to image degradation in Compton camera imaging for hadron therapy treatment monitoring. A study of the background and its contribution to image degradation is important to define future strategies to reduce the background in the system. Approach. In this simulation study, the percentage of different kinds of events and their contribution to the reconstructed image in a two-layer Compton camera have been evaluated. To this end, GATE v8.2 simulations of a proton beam impinging on a PMMA phantom have been carried out, for different proton beam energies and at different beam intensities. Main results. For a simulated Compton camera made of Lanthanum (III) Bromide monolithic crystals, coincidences caused by neutrons arriving from the phantom are the most common type of background produced by secondary radiations in the Compton camera, causing between 13% and 33% of the detected coincidences, depending on the beam energy. Results also show that random coincidences are a significant cause of image degradation at high beam intensities, and their influence in the reconstructed images is studied for values of the time coincidence windows from 500 ps to 100 ns. Significance. Results indicate the timing capabilities required to retrieve the fall-off position with good precision. Still, the noise observed in the image when no randoms are considered make us consider further background rejection methods.
|
|
|
LHCb Collaboration(Aaij, R. et al), Jashal, B. K., Martinez-Vidal, F., Oyanguren, A., Remon Alepuz, C., & Ruiz Vidal, J. (2023). Measurement of CP asymmetries in D-(s)(+) -> eta pi(+) and D-(s)(+) -> eta 'pi(+) decays. J. High Energy Phys., 04(4), 081–23pp.
Abstract: Searches for CP violation in the decays D-(s)(+) -> eta pi(+) and D-(s)(+) -> eta'pi(+) are performed using pp collision data corresponding to 6 fb(-1) of integrated luminosity collected by the LHCb experiment. The calibration channels D-(s)(+) -> phi pi(+) are used to remove production and detection asymmetries. The resulting CP-violating asymmetries are A(CP) (D+ -> eta pi(+)) = (0.34 +/- 0.66 +/- 0.16 +/- 0.05)%, A(CP) (D-s(+) -> eta pi(+)) = (0.32 +/- 0.51 +/- 0.12)%, A(CP) (D+ -> eta'pi(+)) = (0.49 +/- 0.18 +/- 0.06 +/- 0.05)%, A(CP) (D-s(+) -> eta'pi(+)) = (0.01 +/- 0.12 +/- 0.08)%, where the first uncertainty is statistical, the second is systematic and the third, relevant for the D+ channels, is due to the uncertainty on A(CP) (D+ -> phi pi(+)). These measurements, currently the most precise for three of the four channels considered, are consistent with the absence of CP violation. A combination of these results with previous LHCb measurements is presented.
|
|
|
Ikeno, N., Toledo, G., Liang, W. H., & Oset, E. (2023). Consistency of the Molecular Picture of Omega(2012) with the Latest Belle Results. Few-Body Syst., 64(3), 55–6pp.
Abstract: We report the results of the research on the Omega(2012) state based on themolecular picture and discuss the consistency of the picture with the Belle experimental results. We study the interaction of the (K) over bar Xi*, eta Omega(s-wave) and (K) over bar Xi(d-wave) channels within a coupled channel unitary approach, and obtain the mass and the width of the Omega(2012) state and the decay ratio R-Xi(K) over bar(Xi pi(K) over bar). We also present a mechanism for Omega c -> pi(+)Omega(2012) production through an external emission Cabibbo favoredweak decay mode, where the Omega(2012) is dynamically generated from the above interaction. We find that the results obtained by the molecular picture are consistent with all Belle experimental data.
|
|
|
Nzongani, U., Zylberman, J., Doncecchi, C. E., Perez, A., Debbasch, F., & Arnault, P. (2023). Quantum circuits for discrete-time quantum walks with position-dependent coin operator. Quantum Inf. Process., 22(7), 270–46pp.
Abstract: The aim of this paper is to build quantum circuits that implement discrete-time quantum walks having an arbitrary position-dependent coin operator. The position of the walker is encoded in base 2: with n wires, each corresponding to one qubit, we encode 2(n) position states. The data necessary to define an arbitrary position-dependent coin operator is therefore exponential in n. Hence, the exponentiality will necessarily appear somewhere in our circuits. We first propose a circuit implementing the position-dependent coin operator, that is naive, in the sense that it has exponential depth and implements sequentially all appropriate position-dependent coin operators. We then propose a circuit that “transfers” all the depth into ancillae, yielding a final depth that is linear in n at the cost of an exponential number of ancillae. Themain idea of this linear-depth circuit is to implement in parallel all coin operators at the different positions. Reducing the depth exponentially at the cost of having an exponential number of ancillae is a goal which has already been achieved for the problem of loading classical data on a quantum circuit (Araujo in Sci Rep 11:6329, 2021) (notice that such a circuit can be used to load the initial state of the walker). Here, we achieve this goal for the problem of applying a position-dependent coin operator in a discrete-time quantum walk. Finally, we extend the result of Welch (New J Phys 16:033040, 2014) from position-dependent unitaries which are diagonal in the position basis to position-dependent 2 x 2-block-diagonal unitaries: indeed, we show that for a position dependence of the coin operator (the block-diagonal unitary) which is smooth enough, one can find an efficient quantum-circuit implementation approximating the coin operator up to an error epsilon (in terms of the spectral norm), the depth and size of which scale as O(1/epsilon). A typical application of the efficient implementation would be the quantum simulation of a relativistic spin-1/2 particle on a lattice, coupled to a smooth external gauge field; notice that recently, quantum spatial-search schemes have been developed which use gauge fields as the oracle, to mark the vertex to be found (Zylberman in Entropy 23:1441, 2021), (Fredon arXiv:2210.13920). A typical application of the linear-depth circuit would be when there is spatial noise on the coin operator (and hence a non-smooth dependence in the position).
|
|
|
ATLAS Collaboration(Aad, G. et al), Amos, K. R., Aparisi Pozo, J. A., Bailey, A. J., Cabrera Urban, S., Cantero, J., et al. (2023). Correlations between flow and transverse momentum in Xe plus Xe and Pb plus Pb collisions at the LHC with the ATLAS detector: A probe of the heavy-ion initial state and nuclear deformation. Phys. Rev. C, 107(5), 054910–28pp.
Abstract: The correlations between flow harmonics v(n) for n = 2, 3, and 4 and mean transverse momentum [pT] in Xe-129 + Xe-129 and Pb-208 + Pb-208 collisions at root s = 5.44 and 5.02 TeV, respectively, are measured using charged particles with the ATLAS detector. The correlations are potentially sensitive to the shape and size of the initial geometry, nuclear deformation, and initial momentum anisotropy. The effects from nonflow and centrality fluctuations are minimized, respectively, via a subevent cumulant method and an event-activity selection based on particle production at very forward rapidity. The v(n)-[p(T)] correlations show strong dependencies on centrality, harmonic number n, pT, and pseudorapidity range. Current models qualitatively describe the overall centrality -and system-dependent trends but fail to quantitatively reproduce all features of the data. In central collisions, where models generally show good agreement, the v(2)-[p(T)] correlations are sensitive to the triaxiality of the quadruple deformation. Comparison of the model with the Pb + Pb and Xe + Xe data confirms that the Xe-129 nucleus is a highly deformed triaxial ellipsoid that has neither a prolate nor oblate shape. This provides strong evidence for a triaxial deformation of the Xe-129 nucleus from high-energy heavy-ion collisions.
|
|