ATLAS Collaboration(Aad, G. et al), Amos, K. R., Aparisi Pozo, J. A., Bailey, A. J., Bouchhar, N., Cabrera Urban, S., et al. (2023). Measurement of Suppression of Large-Radius Jets and Its Dependence on Substructure in Pb+Pb Collisions at sqrt[s_{NN}]=5.02TeV with the ATLAS Detector. Phys. Rev. Lett., 131(17), 172301–22pp.
Abstract: This letter presents a measurement of the nuclear modification factor of large-radius jets in root sNN=5.02 TeV Pb+Pb collisions by the ATLAS experiment. The measurement is performed using 1.72nb^{-1} and 257pb^{-1} of Pb+Pb and pp data, respectively. The large-radius jets are reconstructed with the anti-k{t} algorithm using a radius parameter of R=1.0, by reclustering anti-k{t} R=0.2 jets, and are measured over the transverse momentum (p{T}) kinematic range of 158<p{T}<1000GeV and absolute pseudorapidity |y|<2.0. The large-radius jet constituents are further reclustered using the k{t} algorithm in order to obtain the splitting parameters, sqrt[d{12}] and DeltaR{12}, which characterize the transverse momentum scale and angular separation for the hardest splitting in the jet, respectively. The nuclear modification factor, R{AA}, obtained by comparing the Pb+Pb jet yields to those in pp collisions, is measured as a function of jet transverse momentum (p{T}) and sqrt[d{12}] or DeltaR{12}. A significant difference in the quenching of large-radius jets having single subjet and those with more complex substructure is observed. Systematic comparison of jet suppression in terms of R{AA} for different jet definitions is also provided. Presented results support the hypothesis that jets with hard internal splittings lose more energy through quenching and provide a new perspective for understanding the role of jet structure in jet suppression.
|
ATLAS Collaboration(Aaboud, M. et al), Alvarez Piqueras, D., Barranco Navarro, L., Cabrera Urban, S., Castillo Gimenez, V., Cerda Alberich, L., et al. (2017). Measurements of the production cross section of a Z boson in association with jets in pp collisions at root s=13 TeV with the ATLAS detector. Eur. Phys. J. C, 77(6), 361–31pp.
Abstract: Measurements of the production cross section of a Z boson in association with jets in proton-proton collisions at root s = 13TeV are presented, using data corresponding to an integrated luminosity of 3.16 fb(-1) collected by the ATLAS experiment at the CERN Large Hadron Collider in 2015. Inclusive and differential cross sections are measured for events containing a Z boson decaying to electrons or muons and produced in association with up to seven jets with p(T) > 30GeV and vertical bar y vertical bar < 2.5. Predictions from different Monte Carlo generators based on leading-order and nextto-leading-order matrix elements for up to two additional partons interfaced with parton shower and fixed-order predictions at next-to-leading order and next-to-next-to-leading order are compared with the measured cross sections. Good agreement within the uncertainties is observed for most of the modelled quantities, in particular with the generators which use next-to-leading-order matrix elements and the more recent next-to-next-to-leading-order fixed-order predictions.
|
ATLAS Collaboration(Aaboud, M. et al), Alvarez Piqueras, D., Barranco Navarro, L., Cabrera Urban, S., Castillo Gimenez, V., Cerda Alberich, L., et al. (2017). Precision measurement and interpretation of inclusive W+, W- and Z/gamma* production cross sections with the ATLAS detector. Eur. Phys. J. C, 77(6), 367–62pp.
Abstract: High-precision measurements by the ATLAS Collaboration are presented of inclusive W+ -> l(+) nu, W- -> l(-) (nu) over bar and Z/gamma* -> ll (l = e, mu) Drell-Yan production cross sections at the LHC. The data were collected in proton-proton collisions at root s = 7 TeV with an integrated luminosity of 4.6 fb(-1). Differential W+ and W- cross sections are measured in a lepton pseudorapidity range vertical bar eta(l)vertical bar < 2.5. Differential Z/gamma* cross sections are measured as a function of the absolute dilepton rapidity, for vertical bar y(ll)vertical bar < 3.6, for three intervals of dilepton mass, m(ll), extending from 46 to 150 GeV. The integrated and differential electron- and muon-channel cross sections are combined and compared to theoretical predictions using recent sets of parton distribution functions. The data, together with the final inclusive e(+/-) p scattering cross-section data from H1 and ZEUS, are interpreted in a next-to-next-to-leading-order QCD analysis, and a new set of parton distribution functions, ATLAS-epWZ16, is obtained. The ratio of strange-to-light sea-quark densities in the proton is determined more accurately than in previous determinations based on collider data only, and is established to be close to unity in the sensitivity range of the data. A new measurement of the CKM matrix element vertical bar V-cs vertical bar is also provided.
|
ATLAS Collaboration(Aaboud, M. et al), Alvarez Piqueras, D., Barranco Navarro, L., Cabrera Urban, S., Castillo Gimenez, V., Cerda Alberich, L., et al. (2017). Measurement of jet fragmentation in Pb plus Pb and pp collisions at root s(NN)=2.76 TeV with the ATLAS detector at the LHC. Eur. Phys. J. C, 77(6), 379–29pp.
Abstract: The distributions of transverse momentum and longitudinal momentum fraction of charged particles in jets are measured in Pb+Pb and pp collisions with the ATLAS detector at the LHC. The distributions are measured as a function of jet transverse momentum and rapidity. The analysis utilises an integrated luminosity of 0.14 nb(-1) of Pb+Pb data and 4.0 pb(-1) of pp data collected in 2011 and 2013, respectively, at the same centre-of-mass energy of 2.76 TeV per colliding nucleon pair. The distributions measured in pp collisions are used as a reference for those measured in Pb+Pb collisions in order to evaluate the impact on the internal structure of jets from the jet energy loss of fast partons propagating through the hot, dense medium created in heavy-ion collisions. Modest but significant centrality-dependent modifications of fragmentation functions in Pb+Pb collisions with respect to those in pp collisions are seen. No significant dependence of modifications on jet p(T) and rapidity selections is observed except for the fragments with the highest transverse momenta for which some reduction of yields is observed for more forward jets.
|
Garcia Canal, C. A., Tarutina, T., & Vento, V. (2017). Deuteron structure in the deep inelastic regime. Eur. Phys. J. A, 53(6), 118–5pp.
Abstract: We study nuclear effects in the deuteron in the deep inelastic regime using the newest available data. We put special emphasis on their Q(2) dependence. The study is carried out using a scheme which parameterizes, in a simple manner, these effects by changing the proton and neutron stucture functions in medium. The result of our analysis is compared with other recent proposals. We conclude that precise EMC ratios cannot be obtained without considering the nuclear effects in the deuteron.
|
LHCb Collaboration(Aaij, R. et al), Garcia Martin, L. M., Martinez-Vidal, F., Oyanguren, A., Remon Alepuz, C., Ruiz Valls, P., et al. (2017). Measurement of the J/psi pair production cross-section in pp collisions at root s=13 TeV. J. High Energy Phys., 06(6), 047–38pp.
Abstract: The production cross-section of J/psi pairs is measured using a data sample of pp collisions collected by the LHCb experiment at a centre-of-mass energy of root s = 13TeV, corresponding to an integrated luminosity of 279 +/- 11 pb(-1). The measurement is performed for J/psi mesons with a transverse momentum of less than 10 GeV/c in the rapidity range 2.0 < y < 4.5. The production cross-section is measured to be 15.2 +/- 1.0 +/- 0.9 nb. The first uncertainty is statistical, and the second is systematic. The differential cross-sections as functions of several kinematic variables of the J/psi pair are measured and compared to theoretical predictions.
|
BRIKEN Collaboration(Tarifeño-Saldivia, A. et al), Tain, J. L., Domingo-Pardo, C., Agramunt, J., Algora, A., Morales, A. I., et al. (2017). Conceptual design of a hybrid neutron-gamma detector for study of beta-delayed neutrons at the RIB facility of RIKEN. J. Instrum., 12, P04006–22pp.
Abstract: BRIKEN is a complex detection system to be installed at the RIB-facility of the RIKEN Nishina Center. It is aimed at the detection of heavy-ion implants, β-particles, γ-rays and β-delayed neutrons. The whole detection setup involves the Advanced Implantation Detection Array (AIDA), two HPGe Clover detectors and a large set of 166 counters of 3He embedded in a high-density polyethylene matrix. This article reports on a novel methodology developed for the conceptual design and optimisation of the 3He-tubes array, aiming at the best possible performance in terms of neutron detection. The algorithm is based on a geometric representation of two selected parameters of merit, namely, average neutron detection efficiency and efficiency flatness, as a function of a reduced number of geometric variables. The response of the detection system itself, for each configuration, is obtained from a systematic MC-simulation implemented realistically in Geant4. This approach has been found to be particularly useful. On the one hand, due to the different types and large number of 3He-tubes involved and, on the other hand, due to the additional constraints introduced by the ancillary detectors for charged particles and gamma-rays. Empowered by the robustness of the algorithm, we have been able to design a versatile detection system, which can be easily re-arranged into a compact mode in order to maximize the neutron detection performance, at the cost of the gamma-ray sensitivity. In summary, we have designed a system which shows, for neutron energies up to 1(5) MeV, a rather flat and high average efficiency of 68.6%(64%) and 75.7%(71%) for the hybrid and compact modes, respectively. The performance of the BRIKEN system has been also quantified realistically by means of MC-simulations made with different neutron energy distributions.
|
ATLAS Collaboration(Aaboud, M. et al), Alvarez Piqueras, D., Barranco Navarro, L., Cabrera Urban, S., Castillo Gimenez, V., Cerda Alberich, L., et al. (2017). Performance of the ATLAS Transition Radiation Tracker in Run 1 of the LHC: tracker properties. J. Instrum., 12, P05002–42pp.
Abstract: The tracking performance parameters of the ATLAS Transition Radiation Tracker (TRT) as part of the ATLAS inner detector are described in this paper for different data-taking conditions in proton-proton, proton-lead and lead-lead collisions at the Large Hadron Collider (LHC). The performance is studied using data collected during the first period of LHC operation (Run 1) and is compared with Monte Carlo simulations. The performance of the TRT, operating with two different gas mixtures (xenon-based and argon-based) and its dependence on the TRT occupancy is presented. These studies show that the tracking performance of the TRT is similar for the two gas mixtures and that a significant contribution to the particle momentum resolution is made by the TRT up to high particle densities.
|
Kuehn, S. et al, Bernabeu, J., Lacasta, C., Marco-Hernandez, R., Santoyo, D., Solaz, C., et al. (2017). Prototyping of hybrids and modules for the forward silicon strip tracking detector for the ATLAS Phase-II upgrade. J. Instrum., 12, P05015–26pp.
Abstract: For the High-Luminosity upgrade of the Large Hadron Collider an increased instantaneous luminosity of up to 7.5 . 10(34) cm(-2) s(-1), leading to a total integrated luminosity of up to 3000 fb(-1), is foreseen. The current silicon and transition radiation tracking detectors of the ATLAS experiment will be unable to cope with the increased track densities and radiation levels, and will need to be replaced. The new tracking detector will consist entirely of silicon pixel and strip detectors. In this paper, results on the development and tests of prototype components for the new silicon strip detector in the forward regions (end-caps) of the ATLAS detector are presented. Flex-printed readout boards with fast readout chips, referred to as hybrids, and silicon detector modules are investigated. The modules consist of a hybrid glued onto a silicon strip sensor. The channels on both are connected via wire-bonds for readout and powering. Measurements of important performance parameters and a comparison of two possible readout schemes are presented. In addition, the assembly procedure is described and recommendations for further prototyping are derived.
|
LHCb Collaboration(Aaij, R. et al), Garcia Martin, L. M., Martinez-Vidal, F., Oyanguren, A., Remon Alepuz, C., Ruiz Valls, P., et al. (2017). Observation of the decay B-s(0) -> eta(c)phi and evidence for B-s(0) -> eta(c)pi(+)pi(-). J. High Energy Phys., 07(7), 021–33pp.
Abstract: A study of B-s(0) -> eta(c)phi and B-s(0) -> eta(c)pi(+)pi(-) decays is performed using pp collision data corresponding to an integrated luminosity of 3.0 fb(-1), collected with the LHCb detector in Run 1 of the LHC. The observation of the decay B-s(0) -> eta(c)phi is reported, where the eta(c) meson is reconstructed in the p (p) over bar, K+K-pi(+)pi(-), pi(+)pi(-)pi(+)pi-and K+K-K+K-decay modes and the phi(1020) in the K+K-decay mode. The decay B-s(0) -> J/psi phi is used as a normalisation channel. Evidence is also reported for the decay B-s(0) -> eta(c)pi(+)pi(-), where the eta(c) meson is reconstructed in the p (p) over bar decay mode, using the decay B-s(0) -> J/psi phi pi(+)pi-as a normalisation channel. The measured branching fractions are B(B-s(0) -> eta(c)phi) = (5 : 01 +/- 0 : 53 +/- 0 : 27 +/- 0 : 63) x 10(-4), B(B-s(0) -> eta(c)pi(+)pi(-)) = (1 : 76 +/- 0 : 59 +/- 0 : 12 +/- 0 : 29) x 10(-4), where in each case the fi rst uncertainty is statistical, the second systematic and the third uncertainty is due to the limited knowledge of the external branching fractions.
|
