|
ATLAS Collaboration(Aaboud, M. et al), Alvarez Piqueras, D., Barranco Navarro, L., Cabrera Urban, S., Castillo Gimenez, V., Cerda Alberich, L., et al. (2017). Measurements of charge and CP asymmetries in b-hadron decays using top-quark events collected by the ATLAS detector in pp collisions at root s=8 TeV. J. High Energy Phys., 02(2), 071–49pp.
Abstract: Same-and opposite-sign charge asymmetries are measured in lepton+ jets t (t) over bar events in which a b-hadron decays semileptonically to a soft muon, using data corresponding to an integrated luminosity of 20.3 fb(-1) from proton-proton collisions at a centre-of-mass energy of root s = 8 TeV collected with the ATLAS detector at the Large Hadron Collider at CERN. The charge asymmetries are based on the charge of the lepton from the top-quark decay and the charge of the soft muon from the semileptonic decay of a b -hadron and are measured in a fi ducial region corresponding to the experimental acceptance. Four CP asymmetries (one mixing and three direct) are measured and are found to be compatible with zero and consistent with the Standard Model.
|
|
|
Diaz, M. A., Koch, B., & Rojas, N. (2017). Non-renormalizable operators for solar neutrino mass generation in Split SuSy with bilinear R-parity violation. Nucl. Phys. B, 916, 402–413.
Abstract: The Minimal Supersymmetric Extension of the Standard Model (MSSM) is able to explain the current data from neutrino physics. Unfortunately Split Supersymmetry as low energy approximation of this theory fails to generate a solar square mass difference, including after the addition of bilinear R-Parity Violation. In this work, it is shown how one can derive an effective low energy theory from the MSSM in the spirit of Split Supersymmetry, which has the potential of explaining the neutrino phenomenology. This is achieved by going beyond leading order in the process of integrating out heavy scalars from the original theory, which results in non-renormalizable operators in the effective low energy theory. It is found that in particular a d = 8 operator is crucial for the generation of the neutrino mass differences.
|
|
|
ATLAS Collaboration(Aaboud, M. et al), Alvarez Piqueras, D., Barranco Navarro, L., Cabrera Urban, S., Castillo Gimenez, V., Cerda Alberich, L., et al. (2017). Search for new phenomena in events containing a same-flavour opposite-sign dilepton pair, jets, and large missing transverse momentum in root s=13 TeV pp collisions with the ATLAS detector. Eur. Phys. J. C, 77(3), 144–40pp.
Abstract: Two searches for new phenomena in final states containing a same-flavour opposite-sign lepton (electron or muon) pair, jets, and large missing transverse momentum are presented. These searches make use of proton-proton collision data, collected during 2015 and 2016 at a centre-of-mass energy root s = 13 TeV by the ATLAS detector at the large hadron collider, which correspond to an integrated luminosity of 14.7 fb(-1). Both searches target the pair production of supersymmetric particles, squarks or gluinos, which decay to final states containing a same-flavour opposite-sign lepton pair via one of two mechanisms: a leptonically decaying Z boson in the final state, leading to a peak in the dilepton invariant-mass distribution around the Z boson mass; and decays of neutralinos (e.g.. (chi) over tilde (0)(2) -> l(+)l(-1)(chi) over tilde (0)(1)), yielding a kinematic endpoint in the dilepton invariant-mass spectrum. The data are found to be consistent with the Standard Model expectation. Results are interpreted in simplified models of gluino-pair (squark-pair) production, and provide sensitivity to gluinos (squarks) with masses as large as 1.70 TeV (980 GeV).
|
|
|
BABAR Collaboration(Lees, J. P. et al), Martinez-Vidal, F., & Oyanguren, A. (2017). Cross sections for the reactions e(+)e(-) -> (KSKL0)-K-0 pi(0), (KSKL0)-K-0 eta, and (KSKL0)-K-0 pi(0)pi(0) from events with initial-state radiation. Phys. Rev. D, 95(5), 052001–16pp.
Abstract: We study the processes e(+)e(-) -> (KSKL0)-K-0 pi(0)gamma, (KSKL0)-K-0 eta gamma, and (KSKL0)-K-0 pi(0)pi(0)gamma, where the photon is radiated from the initial state, providing cross section measurements for the hadronic final states over a continuum of center-of-mass energies. The results are based on 469 fb(-1) of data collected at or near the psi(4S) resonance with the BABAR detector at SLAC. We present the first measurements of the e(+)e(-) -> (KSKL0)-K-0 pi(0), (KSKL0)-K-0 eta, and (KSKL0)-K-0 pi(0)pi(0) cross sections up to a center-of-mass energy of 4 GeV and study their intermediate resonance structures. We observe J/psi decays to all of these final states for the first time, present measurements of their J/psi branching fractions, and search for psi(2S)decays.
|
|
|
Ortega, P. G., Segovia, J., Entem, D. R., & Fernandez, F. (2016). Canonical description of the new LHCb resonances. Phys. Rev. D, 94(11), 114018–7pp.
Abstract: The LHCb Collaboration has recently observed four J/psi phi structures called X(4140), X(4274), X(4500), and X(4700) in the B+ -> J/psi phi K+ decays. We study them herein using a nonrelativistic constituent quark model in which the degrees of freedom are quark-antiquark and meson-meson components. The X(4140) resonance appears as a cusp in the J/psi phi channel due to the near coincidence of the D-s(+/-) D-s(*+/-) and J/psi phi mass thresholds. The remaining three [X(4274), X(4500), and X(4700)] appear as conventional charmonium states with quantum numbers 3(3)P(1), 4(3)P(0), and 5(3)P(0), respectively, and their masses and widths are slightly modified due to their coupling with the corresponding closest meson-meson thresholds. A particular feature of our quark model is a lattice-based screened linear confining interaction that has been constrained in the light-quark sector and usually produces higher excited heavy-quark states with lower masses than standard quark model predictions.
|
|
|
Escudero, M., Berlin, A., Hooper, D., & Lin, M. X. (2016). Toward (finally!) ruling out Z and Higgs mediated dark matter models. J. Cosmol. Astropart. Phys., 12(12), 029–21pp.
Abstract: In recent years, direct detection, indirect detection, and collider experiments have placed increasingly stringent constraints on particle dark matter, exploring much of the parameter space associated with the WIMP paradigm. In this paper, we focus on the subset of WIMP models in which the dark matter annihilates in the early universe through couplings to either the Standard Model Z or the Standard Model Higgs boson. Considering fermionic, scalar, and vector dark matter candidates within a model-independent context, we fi nd that the overwhelming majority of these dark matter candidates are already ruled out by existing experiments. In the case of Z mediated dark matter, the only scenarios that are not currently excluded are those in which the dark matter is a fermion with an axial coupling and with a mass either within a few GeV of the Z resonance (m(D M) similar or equal to m(Z)/2) or greater than 200 GeV, or with a vector coupling and with m(DM) > 6TeV. Several Higgs mediated scenarios are currently viable if the mass of the dark matter is near the Higgs pole (m(DM) similar or equal to m(H) /2). Otherwise, the only scenarios that are not excluded are those in which the dark matter is a scalar (vector) heavier than 400 GeV (1160 GeV) with a Higgs portal coupling, or a fermion with a pseudoscalar (CP violating) coupling to the Standard Model Higgs boson. With the exception of dark matter with a purely pseudoscalar coupling to the Higgs, it is anticipated that planned direct detection experiments will probe nearly the entire range of models considered in this study.
|
|
|
KM3NeT Collaboration(Adrian-Martinez, S. et al), Barrios-Marti, J., Calvo, D., Hernandez-Rey, J. J., Illuminati, G., Lotze, M., et al. (2016). A method to stabilise the performance of negatively fed KM3NeT photomultipliers. J. Instrum., 11, P12014–12pp.
Abstract: The KM3NeT research infrastructure, currently under construction in the Mediterranean Sea, will host neutrino telescopes for the identification of neutrino sources in the Universe and for studies of the neutrino mass hierarchy. These telescopes will house hundreds of thousands of photomultiplier tubes that will have to be operated in a stable and reliable fashion. In this context, the stability of the dark counts has been investigated for photomultiplier tubes with negative high voltage on the photocathode and held in insulating support structures made of 3D printed nylon material. Small gaps between the rigid support structure and the photomultiplier tubes in the presence of electric fields can lead to discharges that produce dark count rates that are highly variable. A solution was found by applying the same insulating varnish as used for the high voltage bases directly to the outside of the photomultiplier tubes. This transparent conformal coating provides a convenient and inexpensive method of insulation.
|
|
|
ATLAS Collaboration(Aaboud, M. et al), Alvarez Piqueras, D., Barranco Navarro, L., Cabrera Urban, S., Castillo Gimenez, V., Cerda Alberich, L., et al. (2016). A measurement of material in the ATLAS tracker using secondary hadronic interactions in 7 TeV p p collisions. J. Instrum., 11, P11020–41pp.
Abstract: Knowledge of the material in the ATLAS inner tracking detector is crucial in under-standing the reconstruction of charged-particle tracks, the performance of algorithms that identify jets containing b-hadrons and is also essential to reduce background in searches for exotic particles that can decay within the inner detector volume. Interactions of primary hadrons produced in pp collisions with the material in the inner detector are used to map the location and amount of this material. The hadronic interactions of primary particles may result in secondary vertices, which in this analysis are reconstructed by an inclusive vertex-finding algorithm. Data were collected using minimum-bias triggers by the ATLAS detector operating at the LHC during 2010 at centre-of-mass energy root s = 7 TeV, and correspond to an integrated luminosity of 19 nb(-1). Kinematic properties of these secondary vertices are used to study the validity of the modelling of hadronic interactions in simulation. Secondary-vertex yields are compared between data and simulation over a volume of about 0.7m(3) around the interaction point, and agreement is found within overall uncertainties.
|
|
|
Albiol, F., Corbi, A., & Albiol, A. (2017). 3D measurements in conventional X-ray imaging with RGB-D sensors. Med. Eng. Phys., 42, 73–79.
Abstract: A method for deriving 3D internal information in conventional X-ray settings is presented. It is based on the combination of a pair of radiographs from a patient and it avoids the use of X-ray-opaque fiducials and external reference structures. To achieve this goal, we augment an ordinary X-ray device with a consumer RGB-D camera. The patient' s rotation around the craniocaudal axis is tracked relative to this camera thanks to the depth information provided and the application of a modern surface-mapping algorithm. The measured spatial information is then translated to the reference frame of the X-ray imaging system. By using the intrinsic parameters of the diagnostic equipment, epipolar geometry, and X-ray images of the patient at different angles, 3D internal positions can be obtained. Both the RGB-D and Xray instruments are first geometrically calibrated to find their joint spatial transformation. The proposed method is applied to three rotating phantoms. The first two consist of an anthropomorphic head and a torso, which are filled with spherical lead bearings at precise locations. The third one is made of simple foam and has metal needles of several known lengths embedded in it. The results show that it is possible to resolve anatomical positions and lengths with a millimetric level of precision. With the proposed approach, internal 3D reconstructed coordinates and distances can be provided to the physician. It also contributes to reducing the invasiveness of ordinary X-ray environments and can replace other types of clinical explorations that are mainly aimed at measuring or geometrically relating elements that are present inside the patient's body.
|
|
|
Miyahara, K., Hyodo, T., Oka, M., Nieves, J., & Oset, E. (2017). Theoretical study of the Xi(1620) and Xi(1690) resonances in Xi(c)-> pi(+) MB decays. Phys. Rev. C, 95(3), 035212–12pp.
Abstract: Nonleptonic weak decays of Xi(c) into pi(+) and a meson (M)-baryon (B) final state, MB, are analyzed from the viewpoint of probing S = -2 baryon resonances, i.e., Xi(1620) and Xi(1690), of which spin-parity and other properties are not well known. We argue that the weak decay of Xi(c) is dominated by a single quark-line diagram, preferred by the Cabibbo-Kobayashi-Maskawa coefficient, color recombination factor, the diquark correlation, and the kinematical condition. The decay process has an advantage of being free from meson resonances in the p+ M invariantmass distribution. The invariant mass distribution of the meson-baryon final state is calculated with three different chiral unitary approaches, assuming that the Xi(1620) and Xi(1690) resonances have J(P) = 1/2(-). It is found that a clear peak for the Xi(1690) is seen in the pi Xi and K Lambda spectra. We also suggest that the ratios of the pi Xi, K Lambda, and K Sigma final states are useful to distinguish whether the peak is originated from the Xi(1690) resonance or it is a K Sigma threshold effect.
|
|