|
Li, X. Q., Li, Y. M., Lu, G. R., & Su, F. (2012). B-s(0)-(B)over-bar(s)(0) mixing in a family non-universal Z ' model revisited. J. High Energy Phys., 05(5), 049–27pp.
Abstract: Motivated by the very recent measurements performed at the LHCb and the Tevatron of the B-s(0) – (B) over bar (0)(s) mixing, in this paper we revisit it in a family non-universal Z' model, to check if a simultaneous explanation for all the mixing observables, especially for the like-sign dimuon charge asymmetry observed by the D0 collaboration, could be made in such a specific model. In the first scenario where the Z' boson contributes only to the off-diagonal element M-12(s), it is found that, once the combined constraints from Delta M-s, phi(s) and Delta Gamma(s) are imposed, the model could not explain the measured flavour-specific CP asymmetry a(fs)(s), at least within its 1 sigma ranges. In the second scenario where the NP contributes also to the absorptive part Gamma(s)(12) via tree-level Z'-induced b -> c (c) over bars operators, we find that, with the constraints from Delta M-s, phi(s) and the indirect CP asymmetry in (B) over bar (d) -> J/psi K-S taken into account, the present measured 1 sigma experimental ranges for a(fs)(s) could not be reproduced too. Thus, such a specific Z' model with our specific assumptions could not simultaneously reconcile all the present data on B-s(0) – B-s(0) mixing. Future improved measurements from the LHCb and the proposed superB experiments, especially of the flavour-specific CP asymmetries, are expected to shed light on the issue.
|
|
|
Coloma, P., Donini, A., Fernandez-Martinez, E., & Hernandez, P. (2012). Precision on leptonic mixing parameters at future neutrino oscillation experiments. J. High Energy Phys., 06(6), 073–27pp.
Abstract: We perform a comparison of the different future neutrino oscillation experiments based on the achievable precision in the determination of the fundamental parameters theta(13) and the CP phase, delta, assuming that theta(13) is in the range indicated by the recent Daya Bay measurement. We study the non-trivial dependence of the error on delta on its true value. When matter effects are small, the largest error is found at the points where CP violation is maximal, and the smallest at the CP conserving points. The situation is different when matter effects are sizable. As a result of this effect, the comparison of the physics reach of different experiments on the basis of the CP discovery potential, as usually done, can be misleading. We have compared various proposed super-beam, beta-beam and neutrino factory setups on the basis of the relative precision of theta(13) and the error on delta. Neutrino factories, both high-energy or low-energy, outperform alternative beam technologies. An ultimate precision on theta(13) below 3% and an error on delta of <= 7 degrees at 1 sigma (1 d.o.f.) can be obtained at a neutrino factory.
|
|
|
Aparici, A., Herrero-Garcia, J., Rius, N., & Santamaria, A. (2012). On the nature of the fourth generation neutrino and its implications. J. High Energy Phys., 07(7), 030–31pp.
Abstract: We consider the neutrino sector of a Standard Model with four generations. While the three light neutrinos can obtain their masses from a variety of mechanisms with or without new neutral fermions, fourth-generation neutrinos need at least one new relatively light right-handed neutrino. If lepton number is not conserved this neutrino must have a Majorana mass term whose size depends on the underlying mechanism for lepton number violation. Majorana masses for the fourth-generation neutrinos induce relative large two-loop contributions to the light neutrino masses which could be even larger than the cosmological bounds. This sets strong limits on the mass parameters and mixings of the fourth-generation neutrinos.
|
|
|
Barenboim, G., & Rasero, J. (2012). Electroweak baryogenesis window in non standard cosmologies. J. High Energy Phys., 07(7), 028–20pp.
Abstract: In this work we show that the new bounds on the Higgs mass are more than difficult to reconcile with the strong constraints on the physical parameters of the Standard Model and the Minimal Supersymmetric Standard Model imposed by the preservation of the baryon asymmetry. This bound can be weakened by assuming a nonstandard cosmology at the time of the electroweak phase transition, reverting back to standard cosmology by BBN time. Two explicit examples are an early period of matter dominated expansion due to a heavy right handed neutrino (see-saw scale), or a nonstandard braneworld expansion.
|
|
|
Bonnet, F., Hirsch, M., Ota, T., & Winter, W. (2012). Systematic study of the d=5 Weinberg operator at one-loop order. J. High Energy Phys., 07(7), 153–23pp.
Abstract: We perform a systematic study of the d = 5 Weinberg operator at the one-loop level. We identify three different categories of neutrino mass generation: (1) finite irreducible diagrams; (2) finite extensions of the usual seesaw mechanisms at one-loop and (3) divergent loop realizations of the seesaws. All radiative one-loop neutrino mass models must fall in to one of these classes. Case (1) gives the leading contribution to neutrino mass naturally and a classic example of this class is the Zee model. We demonstrate that in order to prevent that a tree level contribution dominates in case (2), Majorana fermions running in the loop and an additional Z(2) symmetry are needed for a genuinely leading one-loop contribution. In the type-II loop extensions, the Yukawa coupling will be generated at one loop, whereas the type-I/III extensions can be interpreted as loop-induced inverse or linear seesaw mechanisms. For the divergent diagrams in category (3), the tree level contribution cannot be avoided and is in fact needed as counter term to absorb the divergence.
|
|
|
Donini, A., Hernandez, P., Lopez-Pavon, J., Maltoni, M., & Schwetz, T. (2012). The minimal 3+2 neutrino model versus oscillation anomalies. J. High Energy Phys., 07(7), 161–20pp.
Abstract: We study the constraints imposed by neutrino oscillation experiments on the minimal extension of the Standard Model that can explain neutrino masses, which requires the addition of just two singlet Weyl fermions. The most general renormalizable couplings of this model imply generically four massive neutrino mass eigenstates while one remains massless: it is therefore a minimal 3+2 model. The possibility to account for the confirmed solar, atmospheric and long-baseline oscillations, together with the LSND/MiniBooNE and reactor anomalies is addressed. We find that the minimal model can fit oscillation data including the anomalies better than the standard 3 nu model and similarly to the 3 + 2 phenomenological models, even though the number of free parameters is much smaller than in the latter. Accounting for the anomalies in the minimal model favours a normal hierarchy of the light states and requires a large reactor angle, in agreement with recent measurements. Our analysis of the model employs a new parametrization of seesaw models that extends the Casas-Ibarra one to regimes where higher order corrections in the light-heavy mixings are significant.
|
|
|
del Aguila, F., Aparici, A., Bhattacharya, S., Santamaria, A., & Wudka, J. (2012). Effective Lagrangian approach to neutrinoless double beta decay and neutrino masses. J. High Energy Phys., 06(6), 146–37pp.
Abstract: Neutrinoless double beta (0 nu beta beta) decay can in general produce electrons of either chirality, in contrast with the minimal Standard Model (SM) extension with only the addition of the Weinberg operator, which predicts two left-handed electrons in the final state. We classify the lepton number violating (LNV) effective operators with two leptons of either chirality but no quarks, ordered according to the magnitude of their contribution to 0 nu beta beta decay. We point out that, for each of the three chirality assignments, e(L)e(L), e(L)e(R) and e(R)e(R), there is only one LNV operator of the corresponding type to lowest order, and these have dimensions 5, 7 and 9, respectively. Neutrino masses are always induced by these extra operators but can be delayed to one or two loops, depending on the number of RH leptons entering in the operator. Then, the comparison of the 0 nu beta beta decay rate and neutrino masses should indicate the effective scenario at work, which confronted with the LHC searches should also eventually decide on the specific model elected by nature. We also list the SM additions generating these operators upon integration of the heavy modes, and discuss simple realistic examples of renormalizable theories for each case.
|
|
|
ATLAS Collaboration(Aad, G. et al), Cabrera Urban, S., Castillo Gimenez, V., Costa, M. J., Ferrer, A., Fiorini, L., et al. (2012). Search for a standard model Higgs boson in the H -> ZZ -> l(+)l(-) nu(nu)over-bar decay channel using 4.7 fb(-1) of root s=7 TeV data with the ATLAS detector. Phys. Lett. B, 717(1-3), 29–48.
Abstract: A search for a Standard Model Higgs boson decaying via H -> ZZ -> l(+)l(-) nu(nu) over bar, where l represents electrons or muons, is presented. It is based on proton-proton collision data at root s = 7 TeV, collected by the ATLAS experiment at the LHC during 2011 and corresponding to an integrated luminosity of 4.7 fb(-1). The data agree with the expected Standard Model backgrounds. Upper limits on the Higgs boson production cross section are derived for Higgs boson masses between 200 GeV and 600 GeV and the production of a Standard Model Higgs boson with a mass in the range 319-558 GeV is excluded at the 95% confidence level.
|
|
|
ATLAS Collaboration(Aad, G. et al), Cabrera Urban, S., Castillo Gimenez, V., Costa, M. J., Ferrer, A., Fiorini, L., et al. (2012). Search for a Standard Model Higgs boson in the mass range 200-600 GeV in the H -> ZZ -> l(+)l(-)q(q)over-bar decay channel with the ATLAS detector. Phys. Lett. B, 717(1-3), 70–88.
Abstract: A search for a heavy Standard Model Higgs boson decaying via H -> ZZ -> l(+)l(-)q (q) over bar, where l = e or mu, is presented. The search uses a data set of pp collisions at root s = 7 TeV, corresponding to an integrated luminosity of 4.7 fb(-1) collected in 2011 by the ATLAS detector at the CERN LHC. No significant excess of events above the estimated background is found. Upper limits at 95% confidence level on the production cross section of a Higgs boson with a mass in the range between 200 and 600 GeV are derived. A Standard Model Higgs boson with a mass in the range 300 GeV <= m(H) 322 <= GeV or 353 GeV <= m(H) <= 410 GeV is excluded at 95% CL The corresponding expected exclusion range is 351 GeV <= m(H) <= 404 GeV at 95% CL.
|
|
|
Pich, A., Rosell, I., & Sanz-Cillero, J. J. (2012). One-loop calculation of the oblique S parameter in higgsless electroweak models. J. High Energy Phys., 08(8), 106–34pp.
Abstract: We present a one-loop calculation of the oblique S parameter within Higgsless models of electroweak symmetry breaking and analyze the phenomenological implications of the available electroweak precision data. We use the most general effective Lagrangian with at most two derivatives, implementing the chiral symmetry breaking SU(2)(L) circle times SU(2)(R) -> SU(2)(L+R) with Goldstones, gauge bosons and one multiplet of vector and axial-vector massive resonance states. Using the dispersive representation of Peskin and Takeuchi and imposing the short-distance constraints dictated by the operator product expansion, we obtain S at the NLO in terms of a few resonance parameters. In asymptotically-free gauge theories, the final result only depends on the vector-resonance mass and requires M-V > 1.8TeV (3.8TeV) to satisfy the experimental limits at the 3 sigma (1 sigma) level; the axial state is always heavier, we obtain M-A > 2.5TeV (6.6TeV) at 3 sigma (1 sigma). In strongly-coupled models, such as walking or conformal technicolour, where the second Weinberg sum rule does not apply, the vector and axial couplings are not determined by the short-distance constraints; but one can still derive a lower bound on S, provided the hierarchy M-V < M-A remains valid. Even in this less constrained situation, we find that in order to satisfy the experimental limits at 3 sigma one needs M-V,M-A > 1.8TeV.
|
|