LHCb Collaboration(Aaij, R. et al), Garcia Martin, L. M., Henry, L., Martinez-Vidal, F., Oyanguren, A., Remon Alepuz, C., et al. (2018). Measurement of the time-integrated CP asymmetry in D (0) -> K (S) (0) K (S) (0) decays. J. High Energy Phys., 11(11), 048–19pp.
Abstract: A measurement of the time-integrated CP asymmetry in D (0) -> K (S) (0) K (S) (0) decays is reported. The data correspond to an integrated luminosity of about 2 fb(-1) collected in 2015-2016 by the LHCb collaboration in pp collisions at a centre-of-mass energy of 13 TeV. The D (0) candidate is required to originate from a D (*+) -> D (0) pi (+) decay, allowing the determination of the flavour of the D (0) meson using the pion charge. The D (0) -> K (+) K (-) decay, which has a well measured CP asymmetry, is used as a calibration channel. The CP asymmetryfor D (0) -> K (S) (0) K (S) (0) is measured to be where the first uncertainty is statistical and the second is systematic. This result is combined with the previous LHCb measurement at lower centre-of-mass energies to obtain A(CP) (D-0 -> K-S(0) K-S(0)) = (2.3 +/- 2.8 +/- 0.9)%.
|
LHCb Collaboration(Aaij, R. et al), Garcia Martin, L. M., Henry, L., Martinez-Vidal, F., Oyanguren, A., Remon Alepuz, C., et al. (2018). Measurement of D-s(+/-) production asymmetry in pp collisions at root s=7 and 8 TeV. J. High Energy Phys., 08(8), 008–21pp.
Abstract: The inclusive D-s(+/-) production asymmetry is measured in pp collisions collected by the LHCb experiment at centre-of-mass energies of root s = 7 and 8 TeV. Promptly produced D-s(+/-) mesons are used, which decay as D-s(+/-) -> phi pi(+/-), with phi -> K+ K-. The measurement is performed in bins of transverse momentum, pT, and rapidity, y, covering the range 2.5 < pT < 25 : 0 GeV/c and 2.0 < y < 4.5. No kinematic dependence is observed. Evidence of nonzero D-s(+/-) production asymmetry is found with a significance of 3.3 standard deviations.
|
LHCb Collaboration(Aaij, R. et al), Garcia Martin, L. M., Henry, L., Martinez-Vidal, F., Oyanguren, A., Remon Alepuz, C., et al. (2018). Central exclusive production of J/psi and (2S) mesons in pp collisions at root s=13 TeV. J. High Energy Phys., 10(10), 167–27pp.
Abstract: Measurements are reported of the central exclusive production of J= and ( 2 S) mesons in pp collisions at a centre- of- mass energy of 13 TeV. Backgrounds are signi fi cantly reduced compared to previous measurements made at lower energies through the use of new forward shower counters. The products of the cross- sections and the branching fractions for the decays to dimuons, where both muons are within the pseudorapidity range 2 : 0 < < 4 : 5, are measured to be The fi rst uncertainties are statistical, the second are systematic, and the third are due to the luminosity determination. The cross- sections are also measured di ff erentially for meson rapidities between 2.0 and 4.5. Good agreement is observed with theoretical predictions. Photoproduction cross- sections are derived and compared to previous experiments, and a deviation from a pure power- law extrapolation of lower energy data is observed.
|
KM3NeT Collaboration(Aiello, S. et al), Barrios-Marti, J., Calvo, D., Coleiro, A., Colomer, M., Gozzini, S. R., et al. (2018). Characterisation of the Hamamatsu photomultipliers for the KM3NeT Neutrino Telescope. J. Instrum., 13, P05035–17pp.
Abstract: The Hamamatsu R12199-023-inch photomultiplier tube is the photodetector chosen for the first phase of the KM3NeT neutrino telescope. About 7000 photomultipliers have been characterised for dark count rate, timing spread and spurious pulses. The quantum efficiency, the gain and the peak-to-valley ratio have also been measured for a sub-sample in order to determine parameter values needed as input to numerical simulations of the detector.
|
Brook, N. H., Castillo Garcia, L., Conneely, T. M., Cussans, D., van Dijk, M. W. U., Fohl, K., et al. (2018). Testbeam studies of a TORCH prototype detector. Nucl. Instrum. Methods Phys. Res. A, 908, 256–268.
Abstract: TORCH is a novel time-of-flight detector that has been developed to provide charged-particle identification between 2 and 10 GeV/c momentum. TORCH combines arrival times from multiple Cherenkov photons produced within a 10 mm-thick quartz radiator plate, to achieve a 15 ps time-of-flight resolution per incident particle. A customised Micro-Channel Plate photomultiplier tube (MCP-PMT) and associated readout system utilises an innovative charge-sharing technique between adjacent pixels to obtain the necessary 70 ps time resolution of each Cherenkov photon. A five-year R&D programme has been undertaken, culminating in the construction of a small-scale prototype TORCH module. In testbeams at CERN, this prototype operated successfully with customised electronics and readout system. A full analysis chain has been developed to reconstruct the data and to calibrate the detector. Results are compared to those using a commercial Planacon MCP-PMT, and single photon resolutions approaching 80 ps have been achieved. The photon counting efficiency was found to be in reasonable agreement with a GEANT4 Monte Carlo simulation of the detector. The small-scale demonstrator is a precursor to a full-scale TORCH module (with a radiator plate of 660 x 1250 x 10 mm(3)), which is currently under construction.
|
de Blas, J., Eberhardt, O., & Krause, C. (2018). Current and future constraints on Higgs couplings in the nonlinear Effective Theory. J. High Energy Phys., 07(7), 048–45pp.
Abstract: We perform a Bayesian statistical analysis of the constraints on the nonlinear Effective Theory given by the Higgs electroweak chiral Lagrangian. We obtain bounds on the effective coefficients entering in Higgs observables at the leading order, using all available Higgs-boson signal strengths from the LHC runs 1 and 2. Using a prior dependence study of the solutions, we discuss the results within the context of natural-sized Wilson coefficients. We further study the expected sensitivities to the different Wilson coefficients at various possible future colliders. Finally, we interpret our results in terms of some minimal composite Higgs models.
|
Chen, Y. H., Yao, D. L., & Zheng, H. Q. (2018). A Study of rho-omega Mixing in Resonance Chiral Theory. Commun. Theor. Phys., 69(1), 50–58.
Abstract: The strong and electromagnetic corrections to rho-omega mixing are calculated using an SU(2) version of resonance chiral theory up to next-to-leading orders in 1/N-C expansion, respectively. Up to our accuracy, the effect of the momentum dependence of rho-omega mixing is incorporated due to the inclusion of loop contributions. We analyze the impact of rho-omega mixing on the pion vector form factor by performing numerical fit to the data extracted from e(+)e(-) -> pi(+)pi(-) and tau -> nu(tau)2 pi, while the decay width of omega -> pi(+)pi(-) is taken into account as a constraint. It is found that the momentum dependence is significant in a good description of the experimental data. In addition, based on the fitted values of the involved parameters, we analyze the decay width of omega -> pi(+)pi(-), which turns out to be highly dominated by the rho-omega mixing effect.
|
LHCb Collaboration(Aaij, R. et al), Garcia Martin, L. M., Henry, L., Martinez-Vidal, F., Oyanguren, A., Remon Alepuz, C., et al. (2018). Measurement of CP asymmetry in B-s(0) -> (DsK +/-)-K-/+ decays. J. High Energy Phys., 03(3), 059–28pp.
Abstract: We report the measurements of the CP-violating parameters in B-s(0) -> (DsK +/-)-K--/+ decays observed in pp collisions, using a data set corresponding to an integrated luminosity of 3.0 fb(-1) recorded with the LHCb detector. We measure C-f = 0.73 +/- 0.14 +/- 0.05, A(f)(Delta Gamma) = 0.39 +/- 0.28 +/- 0.15, A(<(f)over) (Delta Gamma)(bar>) = 0.31 +/- 0.28 +/- 0.15, S-f = -0.52 +/- 0.20 +/- 0.07, S-(f) over bar = -0.49 +/- 0.20 +/- 0.07, where the uncertainties are statistical and systematic, respectively. These parameters are used together with the world-average value of the B-s(0) mixing phase, -2 beta(s), to obtain a measurement of the CKM angle gamma from B-s(0) -> (DsK +/-)-K--/+ decays, yielding gamma – (128 (+17)(-22))degrees modulo 180 degrees, where the uncertainty contains both statistical and systematic contributions. This corresponds to 3.8 sigma evidence for CP violation in the interference between decay and decay after mixing.
|
Muñoz, E., Barrio, J., Bernabeu, J., Etxebeste, A., Lacasta, C., Llosa, G., et al. (2018). Study and comparison of different sensitivity models for a two-plane Compton camera. Phys. Med. Biol., 63(13), 135004–19pp.
Abstract: Given the strong variations in the sensitivity of Compton cameras for the detection of events originating from different points in the field of view (FoV), sensitivity correction is often necessary in Compton image reconstruction. Several approaches for the calculation of the sensitivity matrix have been proposed in the literature. While most of these models are easily implemented and can be useful in many cases, they usually assume high angular coverage over the scattered photon, which is not the case for our prototype. In this work, we have derived an analytical model that allows us to calculate a detailed sensitivity matrix, which has been compared to other sensitivity models in the literature. Specifically, the proposed model describes the probability of measuring a useful event in a two-plane Compton camera, including the most relevant physical processes involved. The model has been used to obtain an expression for the system and sensitivity matrices for iterative image reconstruction. These matrices have been validated taking Monte Carlo simulations as a reference. In order to study the impact of the sensitivity, images reconstructed with our sensitivity model and with other models have been compared. Images have been reconstructed from several simulated sources, including point-like sources and extended distributions of activity, and also from experimental data measured with Na-22 sources. Results show that our sensitivity model is the best suited for our prototype. Although other models in the literature perform successfully in many scenarios, they are not applicable in all the geometrical configurations of interest for our system. In general, our model allows to effectively recover the intensity of point-like sources at different positions in the FoV and to reconstruct regions of homogeneous activity with minimal variance. Moreover, it can be employed for all Compton camera configurations, including those with low angular coverage over the scatterer.
|
Olleros, P., Caballero, L., Domingo-Pardo, C., Babiano, V., Ladarescu, I., Calvo, D., et al. (2018). On the performance of large monolithic LaCl3(Ce) crystals coupled to pixelated silicon photosensors. J. Instrum., 13, P03014–17pp.
Abstract: We investigate the performance of large area radiation detectors, with high energy-and spatial-resolution, intended for the development of a Total Energy Detector with gamma-ray imaging capability, so-called i-TED. This new development aims for an enhancement in detection sensitivity in time-of-flight neutron capture measurements, versus the commonly used C6D6 liquid scintillation total-energy detectors. In this work, we study in detail the impact of the readout photosensor on the energy response of large area (50 x 50 mm(2)) monolithic LaCl3(Ce) crystals, in particular when replacing a conventional mono-cathode photomultiplier tube by an 8 x 8 pixelated silicon photomultiplier. Using the largest commercially available monolithic SiPM array (25 cm(2)), with a pixel size of 6 x 6 mm(2), we have measured an average energy resolution of 3.92% FWHM at 662 keV for crystal thick-nesses of 10, 20 and 30 mm. The results are confronted with detailed Monte Carlo (MC) calculations, where optical processes and properties have been included for the reliable tracking of the scintillation photons. After the experimental validation of the MC model, we use our MC code to explore the impact of a smaller photosensor segmentation on the energy resolution. Our optical MC simulations predict only a marginal deterioration of the spectroscopic performance for pixels of 3 x 3 mm(2).
|