|
ATLAS Collaboration(Aad, G. et al), Aparisi Pozo, J. A., Bailey, A. J., Cabrera Urban, S., Castillo, F. L., Castillo Gimenez, V., et al. (2020). Performance of the ATLAS muon triggers in Run 2. J. Instrum., 15(9), P09015–57pp.
Abstract: The performance of the ATLAS muon trigger system is evaluated with proton-proton (pp) and heavy-ion (HI) collision data collected in Run 2 during 2015-2018 at the Large Hadron Collider. It is primarily evaluated using events containing a pair of muons from the decay of Z bosons to cover the intermediate momentum range between 26 GeV and 100 GeV. Overall, the efficiency of the single-muon triggers is about 68% in the barrel region and 85% in the endcap region. The p(T) range for efficiency determination is extended by using muons from decays of J/psi mesons, W bosons, and top quarks. The performance in HI collision data is measured and shows good agreement with the results obtained in pp collisions. The muon trigger shows uniform and stable performance in good agreement with the prediction of a detailed simulation. Dedicated multi-muon triggers with kinematic selections provide the backbone to beauty, quarkonia, and low-mass physics studies. The design, evolution and performance of these triggers are discussed in detail.
|
|
|
ATLAS Collaboration(Aad, G. et al), Aparisi Pozo, J. A., Bailey, A. J., Cabrera Urban, S., Castillo, F. L., Castillo Gimenez, V., et al. (2020). Operation of the ATLAS trigger system in Run 2. J. Instrum., 15(10), P10004–59pp.
Abstract: The ATLAS experiment at the Large Hadron Collider employs a two-level trigger system to record data at an average rate of 1 kHz from physics collisions, starting from an initial bunch crossing rate of 40 MHz. During the LHC Run 2 (2015-2018), the ATLAS trigger system operated successfully with excellent performance and flexibility by adapting to the various run conditions encountered and has been vital for the ATLAS Run-2 physics programme For proton-proton running, approximately 1500 individual event selections were included in a trigger menu which specified the physics signatures and selection algorithms used for the data-taking, and the allocated event rate and bandwidth. The trigger menu must reflect the physics goals for a given data collection period, taking into account the instantaneous luminosity of the LHC and limitations from the ATLAS detector readout, online processing farm, and offline storage. This document discusses the operation of the ATLAS trigger system during the nominal proton-proton data collection in Run 2 with examples of special data-taking runs. Aspects of software validation, evolution of the trigger selection algorithms during Run 2, monitoring of the trigger system and data quality as well as trigger configuration are presented.
|
|
|
ATLAS Collaboration(Aaboud, M. et al), Alvarez Piqueras, D., Aparisi Pozo, J. A., Bailey, A. J., Barranco Navarro, L., Cabrera Urban, S., et al. (2019). Modelling radiation damage to pixel sensors in the ATLAS detector. J. Instrum., 14, P06012–52pp.
Abstract: Silicon pixel detectors are at the core of the current and planned upgrade of the ATLAS experiment at the LHC. Given their close proximity to the interaction point, these detectors will be exposed to an unprecedented amount of radiation over their lifetime. The current pixel detector will receive damage from non-ionizing radiation in excess of 10(15) 1 MeV n(eq)/cm(2), while the pixel detector designed for the high-luminosity LHC must cope with an order of magnitude larger fluence. This paper presents a digitization model incorporating effects of radiation damage to the pixel sensors. The model is described in detail and predictions for the charge collection efficiency and Lorentz angle are compared with collision data collected between 2015 and 2017 (<= 10(15) 1 MeV n(eq)/cm(2)).
|
|
|
ATLAS Collaboration(Aad, G. et al), Alvarez Piqueras, D., Aparisi Pozo, J. A., Bailey, A. J., Cabrera Urban, S., Castillo, F. L., et al. (2020). Measurement of differential cross sections for single diffractive dissociation in root s=8 TeV pp collisions using the ATLAS ALFA spectrometer. J. High Energy Phys., 02(2), 42–37pp.
Abstract: A dedicated sample of Large Hadron Collider proton-proton collision data at centre-of-mass energy s= 8 TeV is used to study inclusive single diffractive dissociation, pp -> X p. The intact final-state proton is reconstructed in the ATLAS ALFA forward spectrometer, while charged particles from the dissociated system X are measured in the central detector components. The fiducial range of the measurement is -4.0 < log(10)xi < -1.6 and 0.016 < |t| < 0.43 GeV2, where xi is the proton fractional energy loss and t is the squared four-momentum transfer. The total cross section integrated across the fiducial range is 1.59 +/- 0.13 mb. Cross sections are also measured differentially as functions of xi, t, and increment eta, a variable that characterises the rapidity gap separating the proton and the system X . The data are consistent with an exponential t dependence, d sigma/dt proportional to e(Bt) with slope parameter B = 7.65 +/- 0.34 GeV-2. Interpreted in the framework of triple Regge phenomenology, the xi dependence leads to a pomeron intercept of alpha(0) = 1.07 +/- 0.09.
|
|
|
ATLAS Collaboration(Aaboud, M. et al), Alvarez Piqueras, D., Aparisi Pozo, J. A., Bailey, A. J., Barranco Navarro, L., Cabrera Urban, S., et al. (2019). Search for single production of vector-like quarks decaying into Wb in pp collisions at root s=13 TeV with the ATLAS detector. J. High Energy Phys., 05(5), 164–56pp.
Abstract: A search for singly produced vector-like quarks Q, where Q can be either a T quark with charge +2/3 or a Y quark with charge -4/3, is performed in proton-proton collision data at a centre-of-mass energy of 13 TeV corresponding to an integrated luminosity of 36.1 fb(-1), recorded with the ATLAS detector at the LHC in 2015 and 2016. The analysis targets Q -> Wb decays where the W boson decays leptonically. No significant deviation from the expected Standard Model background is observed. Upper limits are set on the QWb coupling strength and the mixing between the Standard Model sector and a singlet T quark or a Y quark from a (B, Y) doublet or a (T, B, Y) triplet, taking into account the interference effects with the Standard Model background. The upper limits set on the mixing angle are as small as vertical bar sin theta(L)vertical bar = 0.18 for a singlet T quark of mass 800 GeV, vertical bar sin theta(R)vertical bar = 0.17 for a Y quark of mass 800 GeV in a (B, Y) doublet model and vertical bar sin theta(L)vertical bar = 0: 16 for a Y quark of mass 800 GeV in a (T, B, Y) triplet model. Within a (B, Y) doublet model, the limits set on the mixing parameter vertical bar sin theta(R)vertical bar are comparable with the exclusion limits from electroweak precision observables in the mass range between about 900 GeV and 1250 GeV.
|
|