ATLAS Collaboration(Aad, G. et al), Aparisi Pozo, J. A., Bailey, A. J., Cabrera Urban, S., Castillo, F. L., Castillo Gimenez, V., et al. (2020). Performance of the ATLAS muon triggers in Run 2. J. Instrum., 15(9), P09015–57pp.
Abstract: The performance of the ATLAS muon trigger system is evaluated with proton-proton (pp) and heavy-ion (HI) collision data collected in Run 2 during 2015-2018 at the Large Hadron Collider. It is primarily evaluated using events containing a pair of muons from the decay of Z bosons to cover the intermediate momentum range between 26 GeV and 100 GeV. Overall, the efficiency of the single-muon triggers is about 68% in the barrel region and 85% in the endcap region. The p(T) range for efficiency determination is extended by using muons from decays of J/psi mesons, W bosons, and top quarks. The performance in HI collision data is measured and shows good agreement with the results obtained in pp collisions. The muon trigger shows uniform and stable performance in good agreement with the prediction of a detailed simulation. Dedicated multi-muon triggers with kinematic selections provide the backbone to beauty, quarkonia, and low-mass physics studies. The design, evolution and performance of these triggers are discussed in detail.
|
Poley, L. et al, Bernabeu, J., Civera, J. V., Lacasta, C., Leon, P., Platero, A., et al. (2020). The ABC130 barrel module prototyping programme for the ATLAS strip tracker. J. Instrum., 15(9), P09004–78pp.
Abstract: For the Phase-II Upgrade of the ATLAS Detector [1], its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100% silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototyping programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-250) [2, 3] and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototyping program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests.
|
LHCb Collaboration(Aaij, R. et al), Garcia Martin, L. M., Henry, L., Jashal, B. K., Martinez-Vidal, F., Oyanguren, A., et al. (2020). Study of the lineshape of the chi(c1) (3872) state. Phys. Rev. D, 102(9), 092005–20pp.
Abstract: A study of the lineshape of the chi(c1) (3872) state is made using a data sample corresponding to an integrated luminosity of 3 fb(-1) collected in pp collisions at center-of-mass energies of 7 and 8 TeV with the LHCb detector. Candidate chi(c1)(3872) and psi(2S) mesons from b-hadron decays are selected in the J/psi pi(+)pi(-) decay mode. Describing the lineshape with a Breit-Wigner function, the mass splitting between the chi(c1 )(3872) and psi(2S) states, Delta m, and the width of the chi(c1 )(3872) state, Gamma(Bw), are determined to be (Delta m=185.598 +/- 0.067 +/- 0.068 Mev,)(Gamma BW=1.39 +/- 0.24 +/- 0.10 Mev,) where the first uncertainty is statistical and the second systematic. Using a Flatte-inspired model, the mode and full width at half maximum of the lineshape are determined to be (mode=3871.69+0.00+0.05 MeV.)(FWHM=0.22-0.04+0.13+0.07+0.11-0.06-0.13 MeV, ) An investigation of the analytic structure of the Flatte amplitude reveals a pole structure, which is compatible with a quasibound D-0(D) over bar*(0) state but a quasivirtual state is still allowed at the level of 2 standard deviations.
|
DUNE Collaboration(Abi, B. et al), Antonova, M., Barenboim, G., Cervera-Villanueva, A., De Romeri, V., Fernandez Menendez, P., et al. (2020). Neutrino interaction classification with a convolutional neural network in the DUNE far detector. Phys. Rev. D, 102(9), 092003–20pp.
Abstract: The Deep Underground Neutrino Experiment is a next-generation neutrino oscillation experiment that aims to measure CP-violation in the neutrino sector as part of a wider physics program. A deep learning approach based on a convolutional neural network has been developed to provide highly efficient and pure selections of electron neutrino and muon neutrino charged-current interactions. The electron neutrino (antineutrino) selection efficiency peaks at 90% (94%) and exceeds 85% (90%) for reconstructed neutrino energies between 2-5 GeV. The muon neutrino (antineutrino) event selection is found to have a maximum efficiency of 96% (97%) and exceeds 90% (95%) efficiency for reconstructed neutrino energies above 2 GeV. When considering all electron neutrino and antineutrino interactions as signal, a selection purity of 90% is achieved. These event selections are critical to maximize the sensitivity of the experiment to CP-violating effects.
|
Penalva, N., Hernandez, E., & Nieves, J. (2020). (B)over-bar(c) ->eta(c),(B)over-bar(c) -> J/psi and (B)over-bar -> D-(*()) semileptonic decays including new physics. Phys. Rev. D, 102(9), 096016–27pp.
Abstract: We apply the general formalism derived by Penalva et al. [Phys. Rev. D 101, 113004 (2020)] to the semileptonic decay of pseudoscalar mesons containing a b quark. While present (B) over bar -> D-(*()) data give the strongest evidence in favor of lepton flavor universality violation, the observables that are normally considered are not able to distinguish between different new physics (NP) scenarios. In the above reference we discussed the relevant role that the various contributions to the double differential decay widths d(2)Gamma (d omega d cos theta(l)) and d(2)Gamma (d omega dE(l)) could play to this end. Here omega is the product of the two hadron fourvelocities, theta(l) is the angle made by the final lepton and final hadron three-momenta in the center of mass of the final two-lepton system, and E-l is the final charged lepton energy in the laboratory system. The formalism was applied by Penalva et al. to the analysis of the Lambda(b) -> Lambda(c) semileptonic decay, showing the new observables were able to tell apart different NP scenarios. Here we analyze the (B) over barc -> eta(c)tau(nu) over bar (tau), (B) over barc -> J/psi tau(nu) over bar (tau), (B) over bar -> D tau(nu) over bar (tau) and (B) over bar -> D*tau(nu) over bar (tau) , semileptonic decays. We find that, as a general rule, the (B) over barc -> J/psi observables, even including (tau) polarization, are less optimal for distinguishing between NP scenarios than those obtained from (B) over barc -> eta(c) decays, or those presented by Penalva et al. for the related Lambda(b) -> Lambda(c) semileptonic decay. Finally, we show that (B) over bar -> D and (B) over barc -> eta(c) , and (B) over bar -> D* and (B) over barc -> J/psi decay observables exhibit similar behaviors.
|
Chen, P., Ding, G. J., Lu, J. N., & Valle, J. W. F. (2020). Predictions from warped flavor dynamics based on the T ' family group. Phys. Rev. D, 102(9), 095014–17pp.
Abstract: We propose a realistic theory of fermion masses and mixings using a five-dimensional warped scenario where all fermions propagate in the bulk and the Higgs field is localized on the IR bran. The assumed T' flavor symmetry is broken on the branes by flavon fields, providing a consistent scenario where fermion mass hierarchies arise from adequate choices of the bulk mass parameters, while quark and lepton mixing angles are restricted by the family symmetry. Neutrino mass splittings, mixing parameters and the Dirac CP phase all arise from the type-I seesaw mechanism and are tightly correlated, leading to predictions for the neutrino oscillation parameters, as well as expected 0 nu beta beta decay rates within reach of upcoming experiments. The scheme also provides a good global description of flavor observables in the quark sector.
|
LHCb Collaboration(Aaij, R. et al), Henry, L., Jashal, B. K., Martinez-Vidal, F., Oyanguren, A., Remon Alepuz, C., et al. (2021). Observation of Multiplicity Dependent Prompt chi(c1) (3872) and psi (2S) Production in pp Collisions. Phys. Rev. Lett., 126(9), 092001–11pp.
Abstract: The production of chi(c1)(3872) and psi(2S) hadrons is studied as a function of charged particle multiplicity in pp collisions at a center-of-mass energy of 8 TeV, corresponding to an integrated luminosity of 2 fb(-1). For both states, the fraction that is produced promptly at the collision vertex is found to decrease as charged particle multiplicity increases. The ratio of chi(c1) (3872) to psi(2S) cross sections for promptly produced particles is also found to decrease with multiplicity, while no significant dependence on multiplicity is observed for the equivalent ratio of particles produced away from the collision vertex in b-hadron decays. This behavior is consistent with a calculation that models the chi(c1) (3872) structure as a compact tetraquark. Comparisons with model calculations and implications for the binding energy of the chi(c1)(3872) state are discussed.
|
LHCb Collaboration(Aaij, R. et al), Henry, L., Jashal, B. K., Martinez-Vidal, F., Oyanguren, A., Remon Alepuz, C., et al. (2021). Measurement of CP Violation in the Decay B plus -> K+ pi(0). Phys. Rev. Lett., 126(9), 091802–11pp.
Abstract: A measurement of CP violation in the decay B+ -> K+pi(0) is reported using data corresponding to an integrated luminosity of 5.4 fb- 1 collected with the LHCb experiment at a center-of-mass energy of root s = 13 TeV. The CP asymmetry is measured to be 0.025 +/- 0.015 +/- 0.006 +/- 0.003, where the uncertainties are statistical, systematic, and due to an external input. This is the most precise measurement of this quantity. It confirms and significantly enhances the observed anomalous difference between the direct CP asymmetries of the B-0 -> K+pi(-) and B+ -> K+pi 0 decays, known as the K pi puzzle.
|
BABAR Collaboration(Lees, J. P. et al), Martinez-Vidal, F., & Oyanguren, A. (2021). Study of the reactions e(+)e(-) -> 2(pi(+)pi(-))pi(0)pi(0)pi(0) and 2(pi(+)pi(-))pi(0)pi(0)eta at center-of-mass energies from threshold to 4.5 GeV using initial-state radiation. Phys. Rev. D, 103(9), 092001–21pp.
Abstract: We study the processes e(+)e(-) -> 2(pi(+)pi(-))pi(0)pi(0)pi(0)gamma and 2(pi(+)pi(-))pi(0)pi(0)eta gamma in which an energetic photon is radiated from the initial state. The data were collected with the BABAR detector at SLAC. About 14 000 and 4700 events, respectively, are selected from a data sample corresponding to an integrated luminosity of 469 fb(-1). The invariant mass of the hadronic final state defines the effective e(+)e(-) center-of-mass energy. The center-of-mass energies range from threshold to 4.5 GeV. From the mass spectra, the first ever measurements of the e(+)e(-) -> 2(pi(+)pi(-))pi(0)pi(0)pi(0) and the e(+)e(-) -> 2(pi(+)pi(-))pi(0)pi(0)eta cross sections are performed. The contributions from omega pi(+)pi(-)pi(0)pi(0), eta 2(pi(+)pi(-)), and other intermediate states are presented. We observe the J/psi and psi(2S) in most of these final states and measure the corresponding branching fractions, many of them for the first time.
|
Gao, F., Papavassiliou, J., & Pawlowski, J. M. (2021). Fully coupled functional equations for the quark sector of QCD. Phys. Rev. D, 103(9), 094013–25pp.
Abstract: We present a comprehensive study of the quark sector of 2 + 1 flavor QCD, based on a self-consistent treatment of the coupled system of Schwinger-Dyson equations for the quark propagator and the full quark-gluon vertex in the one-loop dressed approximation. The individual form factors of the quark-gluon vertex are expressed in a special tensor basis obtained from a set of gauge-invariant operators. The sole external ingredient used as input to our equations is the Landau gauge gluon propagator with 2 + 1 dynamical quark flavors, obtained from studies with Schwinger-Dyson equations, the functional renormalization group approach, and large volume lattice simulations. The appropriate renormalization procedure required in order to self-consistently accommodate external inputs stemming from other functional approaches or the lattice is discussed in detail, and the value of the gauge coupling is accurately determined at two vastly separated renormalization group scales. Our analysis establishes a clear hierarchy among the vertex form factors. We identify only three dominant ones, in agreement with previous results. The components of the quark propagator obtained from our approach are in excellent agreement with the results from Schwinger-Dyson equations, the functional renormalization group, and lattice QCD simulation, a simple benchmark observable being the chiral condensate in the chiral limit, which is computed as (245 MeV)(3). The present approach has a wide range of applications, including the self-consistent computation of bound-state properties and finite temperature and density physics, which are briefly discussed.
|
