|
CDF Collaboration(Aaltonen, T. et al), & Cabrera, S. (2010). Measurement of the top quark mass and p(p)over-bar -> t(t)over-bar cross section in the all-hadronic mode with the CDF II detector. Phys. Rev. D, 81(5), 052011–20pp.
Abstract: We present a measurement of the top quark mass and of the top-antitop (t (t) over bar) pair production cross section using p (p) over bar data collected with the CDF II detector at the Tevatron Collider at the Fermi National Accelerator Laboratory and corresponding to an integrated luminosity of 2.9 fb(-1). We select events with six or more jets satisfying a number of kinematical requirements imposed by means of a neural-network algorithm. At least one of these jets must originate from a b quark, as identified by the reconstruction of a secondary vertex inside the jet. The mass measurement is based on a likelihood fit incorporating reconstructed mass distributions representative of signal and background, where the absolute jet energy scale ( JES) is measured simultaneously with the top quark mass. The measurement yields a value of 174.8 +/- 2.4(stat + JES)(-1.0)(+1.2)(syst) GeV/c(2), where the uncertainty from the absolute jet energy scale is evaluated together with the statistical uncertainty. The procedure also measures the amount of signal from which we derive a cross section, sigma(t (t$) over bar) = 7.2 +/- 0.5(stat) +/- 1.0(syst) +/- 0.4(lum) pb, for the measured values of top quark mass and JES.
|
|
|
CDF Collaboration(Aaltonen, T. et al), & Cabrera, S. (2010). Measurement of the top quark mass in the dilepton channel using m(T2) at CDF. Phys. Rev. D, 81(3), 031102–9pp.
Abstract: We present measurements of the top quark mass using m(T2), a variable related to the transverse mass in events with two missing particles. We use the template method applied to t (t) over bar dilepton events produced in p (p) over bar collisions at Fermilab's Tevatron Collider and collected by the CDF detector. From a data sample corresponding to an integrated luminosity of 3.4 fb(-1), we select 236 t (t) over bar candidate events. Using the m(T2) distribution, we measure the top quark mass to be M-top = 168.0(-4.0)(4.8)(stat) +/- 2.9(syst) GeV/c(2). By combining m(T2) with the reconstructed top quark mass distributions based on a neutrino weighting method, we measure M-top = 169.3 +/- 2.7(stat) +/- 3.2(syst) GeV/c(2). This is the first application of the m(T2) variable in a mass measurement at a hadron collider.
|
|
|
CDF Collaboration(Aaltonen, T. et al), & Cabrera, S. (2010). Measurements of branching fraction ratios and CP asymmetries in B-+/- -> DCPK +/- decays in hadron collisions. Phys. Rev. D, 81(3), 031105–9pp.
Abstract: We reconstruct B-+/- -> DK +/- decays in a data sample collected by the CDF II detector at the Tevatron collider corresponding to 1 fb(-1) of integrated luminosity. We select decay modes where the D meson decays to either K-pi(+) (flavor eigenstate) or K-K+, pi(-)pi(+) (CP-even eigenstates), and measure the direct CP asymmetry A(CP+) = 0.39 +/- 0.17(stat) +/- 0.04(syst), and the double ratio of CP-even to flavor eigenstate branching fractions RCP+ = 1.30 +/- 0.24(stat) +/- 0.12(syst). These measurements will improve the determination of the Cabibbo-Kobayashi-Maskawa angle gamma. They are performed here for the first time using data from hadron collisions.
|
|
|
CDF Collaboration(Aaltonen, T. et al), Cabrera, S., & Cuenca Almenar, C. (2010). Measurements of the top-quark mass using charged particle tracking. Phys. Rev. D, 81(3), 032002–21pp.
Abstract: We present three measurements of the top-quark mass in the lepton plus jets channel with approximately 1.9 fb(-1) of integrated luminosity collected with the CDF II detector using quantities with minimal dependence on the jet energy scale. One measurement exploits the transverse decay length of b-tagged jets to determine a top-quark mass of 166.9(-8.5)(+9.5)(stat) +/- 2.9(syst) GeV/c(2), and another the transverse momentum of electrons and muons from W-boson decays to determine a top-quark mass of 173.5(-8.9)(+8.8)(stat) +/- 3.8(syst) GeV/c(2). These quantities are combined in a third, simultaneous mass measurement to determine a top-quark mass of 170.7 +/- 6.3(stat) +/- 2.6(syst) GeV/c(2) .
|
|
|
CDF Collaboration(Aaltonen, T. et al), & Cabrera, S. (2010). Observation of single top quark production and measurement of vertical bar V-tb vertical bar with CDF. Phys. Rev. D, 82(11), 112005–59pp.
Abstract: We report the observation of electroweak single top quark production in 3: 2 fb(-1) of p (p) over bar collision data collected by the Collider Detector at Fermilab at root s = 1.96 TeV. Candidate events in the W + jets topology with a leptonically decaying W boson are classified as signal-like by four parallel analyses based on likelihood functions, matrix elements, neural networks, and boosted decision trees. These results are combined using a super discriminant analysis based on genetically evolved neural networks in order to improve the sensitivity. This combined result is further combined with that of a search for a single top quark signal in an orthogonal sample of events with missing transverse energy plus jets and no charged lepton. We observe a signal consistent with the standard model prediction but inconsistent with the background-only model by 5.0 standard deviations, with a median expected sensitivity in excess of 5.9 standard deviations. We measure a production cross section of 2.3-(+0.6)(0.5) (stat + sys) pb, extract the value of the Cabibbo-Kobayashi-Maskawa matrix element vertical bar V-tb vertical bar = 0.91(-0.11)(+0.11) (stat + sys) +/- 0.07 (theory), and set a lower limit vertical bar V-tb vertical bar > 0.71 at the 95% C. L., assuming m(t) = 175 GeV/c(2).
|
|
|
CDF Collaboration(Aaltonen, T. et al), & Cabrera, S. (2010). Measurement of the WW plus WZ production cross section using a matrix element technique in lepton plus jets events. Phys. Rev. D, 82(11), 112001–15pp.
Abstract: We present a measurement of the WW + WZ production cross section observed in a final state consisting of an identified electron or muon, two jets, and missing transverse energy. The measurement is carried out in a data sample corresponding to up to 4.6 fb(-1) of integrated luminosity at root s = 1.96 TeV collected by the CDF II detector. Matrix element calculations are used to separate the diboson signal from the large backgrounds. The WW + WZ cross section is measured to be 17.4 +/- 3.3 pb in agreement with standard model predictions. A fit to the dijet invariant mass spectrum yields a compatible cross section measurement.
|
|
|
CDF Collaboration(Aaltonen, T. et al), & Cabrera, S. (2011). Measurement of the B- lifetime using a simulation free approach for trigger bias correction. Phys. Rev. D, 83(3), 032008–30pp.
Abstract: The collection of a large number of B-hadron decays to hadronic final states at the CDF II Detector is possible due to the presence of a trigger that selects events based on track impact parameters. However, the nature of the selection requirements of the trigger introduces a large bias in the observed proper-decay-time distribution. A lifetime measurement must correct for this bias, and the conventional approach has been to use a Monte Carlo simulation. The leading sources of systematic uncertainty in the conventional approach are due to differences between the data and the Monte Carlo simulation. In this paper, we present an analytic method for bias correction without using simulation, thereby removing any uncertainty due to the differences between data and simulation. This method is presented in the form of a measurement of the lifetime of the B- using the mode B- -> D-0 pi(-). The B- lifetime is measured as tau(-)(B) = 1.663 +/- 0.023 +/- 0.015 ps, where the first uncertainty is statistical and the second systematic. This new method results in a smaller systematic uncertainty in comparison to methods that use simulation to correct for the trigger bias.
|
|
|
CDF Collaboration(Aaltonen, T. et al), & Cabrera, S. (2011). Measurement of the t(t)over-bar production cross section with an in situ calibration of b-jet identification efficiency. Phys. Rev. D, 83(7), 071102–8pp.
Abstract: A measurement of the top-quark pair-production cross section in p (p) over bar collisions at root s = 1.96 TeV using data corresponding to an integrated luminosity of 1.12 fb(-1) collected with the Collider Detector at Fermilab is presented. Decays of top-quark pairs into the final states ev + jets and μv+ jets are selected, and the cross section and the b-jet identification efficiency are determined using a new measurement technique which requires agreement between the measured cross sections with exactly one and with multiple identified b quarks from the top-quark decays. Assuming a top-quark mass of 175 GeV/c(2), a cross section of 8.5 +/- 0.6(stat) +/- 0.7(syst)pb is measured.
|
|
|
CDF Collaboration(Aaltonen, T. et al), & Cabrera, S. (2012). Production of Lambda(0), (Lambda)over-bar(0), Xi(+/-), and Omega(+/-) hyperons in p(p)over-bar collisions at root s=1.96 TeV. Phys. Rev. D, 86(1), 012002–10pp.
Abstract: We report a set of measurements of inclusive invariant p(T) differential cross sections of Lambda(0), (Lambda) over bar (0), Xi(+/-), and Omega(+/-) hyperons reconstructed in the central region with pseudorapidity vertical bar eta vertical bar < 1 and p(T) up to 10 GeV/c. Events are collected with a minimum-bias trigger in p<(p)over bar> collisions at a center-of-mass energy of 1.96 TeV using the CDF II detector at the Tevatron Collider. As p(T) increases, the slopes of the differential cross sections of the three particles are similar, which could indicate a universality of the particle production in p(T). The invariant differential cross sections are also presented for different charged-particle multiplicity intervals.
|
|