|
Esteves, J. N., Romao, J. C., Hirsch, M., Vicente, A., Porod, W., & Staub, F. (2010). LHC and lepton flavour violation phenomenology of a left-right extension of the MSSM. J. High Energy Phys., 12(12), 077–44pp.
Abstract: We study the phenomenology of a supersymmetric left-right model, assuming minimal supergravity boundary conditions. Both left-right and (B-L) symmetries are broken at an energy scale close to, but significantly below the GUT scale. Neutrino data is explained via a seesaw mechanism. We calculate the RGEs for superpotential and soft parameters complete at 2-loop order. At low energies lepton flavour violation (LFV) and small, but potentially measurable mass splittings in the charged scalar lepton sector appear, due to the RGE running. Different from the supersymmetric “pure seesaw” models, both, LFV and slepton mass splittings, occur not only in the left-but also in the right slepton sector. Especially, ratios of LFV slepton decays, such as Br((tau) over bar (R) -> μchi(0)(1))/Br((tau) over bar (L) -> μchi(0)(1)) are sensitive to the ratio of (B-L) and left-right symmetry breaking scales. Also the model predicts a polarization asymmetry of the outgoing positrons in the decay mu(+) -> e(+)gamma, A similar to [0, 1], which differs from the pure seesaw “prediction” A = 1. Observation of any of these signals allows to distinguish this model from any of the three standard, pure (mSugra) seesaw setups.
|
|
|
Hirsch, M., Reichert, L., & Porod, W. (2011). Supersymmetric mass spectra and the seesaw scale. J. High Energy Phys., 05(5), 086–32pp.
Abstract: Supersymmetric mass spectra within two variants of the seesaw mechanism, commonly known as type-II and type-III seesaw, are calculated using full 2-loop RGEs and minimal Supergravity boundary conditions. The type-II seesaw is realized using one pair of 15 and (15) over bar superfields, while the type-III is realized using three copies of 24(M) superfields. Using published, estimated errors on SUSY mass observables attainable at the LHC and in a combined LHC+ILC analysis, we calculate expected errors for the parameters of the models, most notably the seesaw scale. If SUSY particles are within the reach of the ILC, pure mSugra can be distinguished from mSugra plus type-II or type-III seesaw for nearly all relevant values of the seesaw scale. Even in the case when only the much less accurate LHC measurements are used, we find that indications for the seesaw can be found in favourable parts of the parameter space. Since our conclusions crucially depend on the reliability of the theoretically forecasted error bars, we discuss in some detail the accuracies which need to be achieved for the most important LHC and ILC observables before an analysis, such as the one presented here, can find any hints for type-II or type-III seesaw in SUSY spectra.
|
|
|
Esteves, J. N., Romao, J. C., Hirsch, M., Porod, W., Staub, F., & Vicente, A. (2012). Dark matter and LHC phenomenology in a left-right supersymmetric model. J. High Energy Phys., 01(1), 095–33pp.
Abstract: Left-right symmetric extensions of the Minimal Supersymmetric Standard Model can explain neutrino data and have potentially interesting phenomenology beyond that found in minimal SUSY seesaw models. Here we study a SUSY model in which the left-right symmetry is broken by triplets at a high scale, but significantly below the GUT scale. Sparticle spectra in this model differ from the usual constrained MSSM expectations and these changes affect the relic abundance of the lightest neutralino. We discuss changes for the standard stau (and stop) co-annihilation, the Higgs funnel and the focus point regions. The model has potentially large lepton flavour violation in both, left and right, scalar leptons and thus allows, in principle, also for flavoured co-annihilation. We also discuss lepton flavour signals due to violating decays of the second lightest neutralino at the LHC, which can be as large as 20 fb(-1) at root s = 14 TeV.
|
|
|
Hirsch, M., Malinsky, M., Porod, W., Reichert, L., & Staub, F. (2012). Hefty MSSM-like light Higgs in extended gauge models. J. High Energy Phys., 02(2), 084.
Abstract: It is well known that in the MSSM the lightest neutral Higgs h(0) must be, at the tree level, lighter than the Z boson and that the loop corrections shift this stringent upper bound up to about 130GeV. Extending the MSSM gauge group in a suitable way, the new Higgs sector dynamics can push the tree-level mass of h(0) well above the tree-level MSSM limit if it couples to the new gauge sector. This effect is further pronounced at the loop level and h(0) masses in the 140GeV ballpark can be reached easily. We exemplify this for a sample setting with a low-scale U(1)(R) x U(1)(B-L) gauge symmetry in which neutrino masses can be implemented via the inverse seesaw mechanism.
|
|
|
de Campos, F., Eboli, O. J. P., Hirsch, M., Magro, M. B., Porod, W., Restrepo, D., et al. (2010). Probing neutrino oscillations in supersymmetric models at the Large Hadron Collider. Phys. Rev. D, 82(7), 075002–8pp.
Abstract: The lightest supersymmetric particle may decay with branching ratios that correlate with neutrino oscillation parameters. In this case the CERN Large Hadron Collider (LHC) has the potential to probe the atmospheric neutrino mixing angle with sensitivity competitive to its low-energy determination by underground experiments. Under realistic detection assumptions, we identify the necessary conditions for the experiments at CERN's LHC to probe the simplest scenario for neutrino masses induced by minimal supergravity with bilinear R parity violation.
|
|
|
Esteves, J. N., Romao, J. C., Hirsch, M., Staub, F., & Porod, W. (2011). Supersymmetric type-III seesaw mechanism: Lepton flavor violating decays and dark matter. Phys. Rev. D, 83(1), 013003–21pp.
Abstract: We study a supersymmetric version of the seesaw mechanism type III. The model consists of the minimal supersymmetric extension of the standard model particle content plus three copies of 24 superfields. The fermionic part of the SU(2) triplet contained in the 24 is responsible for the type-III seesaw, which is used to explain the observed neutrino masses and mixings. Complete copies of 24 are introduced to maintain gauge coupling unification. These additional states change the beta functions of the gauge couplings above the seesaw scale. Using minimal Supergravity boundary conditions, we calculate the resulting supersymmetric mass spectra at the electroweak scale using full 2-loop renormalization group equations. We show that the resulting spectrum can be quite different compared to the usual minimal Supergravity spectrum. We discuss how this might be used to obtain information on the seesaw scale from mass measurements. Constraints on the model space due to limits on lepton flavour violating decays are discussed. The main constraints come from the bounds on μ-> e gamma but there are also regions where the decay tau -> μgamma gives stronger constraints. We also calculate the regions allowed by the dark matter constraint. For the sake of completeness, we compare our results with those for the supersymmetric seesaw type II and, to some extent, with type I.
|
|
|
Krauss, M. B., Ota, T., Porod, W., & Winter, W. (2011). Neutrino mass from higher than d=5 effective operators in supersymmetry, and its test at the LHC. Phys. Rev. D, 84(11). Retrieved July 6, 2024, from http://dx.doi.org/10.1103/PhysRevD.84.115023
Abstract: We discuss neutrino masses from higher than d = 5 effective operators in a supersymmetric framework, where we explicitly demonstrate which operators could be the leading contribution to neutrino mass in the minimal supersymmetric standard model and next to minimal supersymmetric standard model. As an example, we focus on the d = 7 operator LLH(u)H(u)H(d)H(u), for which we systematically derive all tree-level decompositions. We argue that many of these lead to a linear or inverse seesaw scenario with two extra neutral fermions, where the lepton number violating term is naturally suppressed by a heavy mass scale when the extra mediators are integrated out. We choose one example, for which we discuss possible implementations of the neutrino flavor structure. In addition, we show that the heavy mediators, in this case SU(2) doublet fermions, may indeed be observable at the LHC, since they can be produced by Drell-Yan processes and lead to displaced vertices when they decay. However, the direct observation of lepton number violating processes is on the edge at LHC.
|
|
|
Campos, F., Eboli, O. J. P., Magro, M. B., Porod, W., Restrepo, D., Das, S. P., et al. (2012). Probing neutralino properties in minimal supergravity with bilinear R-parity violation. Phys. Rev. D, 86(7), 075001–8pp.
Abstract: Supersymmetric models with bilinear R-parity violation can account for the observed neutrino masses and mixing parameters indicated by neutrino oscillation data. We consider minimal supergravity versions of bilinear R-parity violation where the lightest supersymmetric particle is a neutralino. This is unstable, with a large enough decay length to be detected at the CERN Large Hadron Collider. We analyze the Large Hadron Collider potential to determine the lightest supersymmetric particle properties, such as mass, lifetime and branching ratios, and discuss their relation to neutrino properties.
|
|
|
Hirsch, M., Reichert, L., Porod, W., & Staub, F. (2012). Phenomenology of a supersymmetric U(1)(B-L) x U(1)(R) extension of the standard model with inverse seesaw mechanism. Phys. Rev. D, 86(9), 093018–26pp.
Abstract: We discuss the minimal supersymmetric U(1)(B-L) X U(1)(R) extension of the standard model. Gauge couplings unify as in the minimal supersymmetric standard model (MSSM), even if the scale of U(1)(B-L) X U(1)(R) breaking is as low as order TeV and the model can be embedded into a SO(10) grand unified theory. The phenomenology of the model differs in some important aspects from the MSSM, leading potentially to rich phenomenology at the LHC. It predicts more light Higgs states and the mostly left CP-even Higgs having a mass that easily reaches 125 GeV, with no constraints on the supersymmetry spectrum. Right sneutrinos can be the lightest supersymmetric particle, changing all dark matter constraints on supersymmetry parameter space. The model has seven neutralinos, and squark/gluino decay chains involve more complicated cascades than in the MSSM. We also briefly discuss low-energy and accelerator constraints on the model, where the most important limits come from recent Z' searches at the LHC and upper limits on lepton flavor violation.
|
|
|
Hirsch, M., Porod, W., Weiss, C., & Staub, F. (2013). Supersymmetric type-III seesaw mechanism: Lepton flavor violation and LHC phenomenology. Phys. Rev. D, 87(1), 013010–12pp.
Abstract: We study a supersymmetric version of the type-III seesaw mechanism considering two variants of the model: a minimal version for explaining neutrino data with only two copies of 24 superfields and a model with three generations of 24-plets. The latter predicts, in general, rates for μ-> e gamma inconsistent with experimental data. However, this bound can be evaded if certain special conditions within the neutrino sector are fulfilled. In the case of two 24-plets, lepton flavor violation constraints can be satisfied much more easily. After specifying the corresponding regions in the minimal supergravity parameter space, we show that under favorable conditions one can test the corresponding flavor structures in the leptonic sector at the LHC. For this we perform Monte Carlo studies for the signals, also taking into account the supersymmetry background. We find that it is only of minor importance for the scenarios studied here.
|
|