|
|
ATLAS Collaboration(Aad, G. et al), Aparisi Pozo, J. A., Bailey, A. J., Cabrera Urban, S., Cardillo, F., Castillo Gimenez, V., et al. (2022). Search for heavy particles in the b-tagged dijet mass distribution with additional b-tagged jets in proton-proton collisions at p root s=13 TeV with the ATLAS experiment. Phys. Rev. D, 105(1), 012001–22pp.
Abstract: A search optimized for new heavy particles decaying to two b-quarks and produced in association with additional b-quarks is reported. The sensitivity is improved by b-tagging at least one lower-pT jet in addition to the two highest-pT jets. The data used in this search correspond to an integrated luminosity of 103 fb-1 collected with a dedicated trijet trigger during the 2017 and 2018 pffisffi = 13 TeV proton-proton collision runs with the ATLAS detector at the LHC. The search looks for resonant peaks in the b-tagged dijet invariant mass spectrum over a smoothly falling background. The background is estimated with an innovative data-driven method based on orthonormal functions. The observed b-tagged dijet invariant mass spectrum is compatible with the background-only hypothesis. Upper limits at 95% confidence level on a heavy vector-boson production cross section times branching ratio to a pair of b-quarks are derived.
|
|
|
|
ATLAS Collaboration(Aad, G. et al), Aparisi Pozo, J. A., Bailey, A. J., Cabrera Urban, S., Castillo, F. L., Castillo Gimenez, V., et al. (2024). Search for quantum black hole production in lepton plus jet final states using proton-proton collisions at √s=13 TeV with the ATLAS detector. Phys. Rev. D, 109(3), 032010–28pp.
Abstract: A search for quantum black holes in electron + jet and muon + jet invariant mass spectra is performed with 140 fb(-1) of data collected by the ATLAS detector in proton-proton collisions at root s = 13 TeV at the Large Hadron Collider. The observed invariant mass spectrum of lepton + jet pairs is consistent with Standard Model expectations. Upper limits are set at 95% confidence level on the production cross section times branching fractions for quantum black holes decaying into a lepton and a quark in a search region with invariant mass above 2.0 TeV. The resulting quantum black hole lower mass threshold limit is 9.2 TeV in the Arkani-Hamed-Dimopoulos-Dvali model, and 6.8 TeV in the Randall-Sundrum model.
|
|
|
|
Pavao, R., Gubler, P., Fernandez-Soler, P., Nieves, J., Oka, M., & Takahashi, T. T. (2021). The negative-parity spin-1/2 A baryon spectrum from lattice QCD and effective theory. Phys. Lett. B, 820, 136473–8pp.
Abstract: The spectrum of the negative-parity spin-1/2 Lambda baryons is studied using lattice QCD and hadronic effective theory in a unitarized coupled-channel framework. A direct comparison between the two approaches is possible by considering the hadronic effective theory in a finite volume and with hadron masses and mesonic decay constants that correspond to the situation studied on the lattice. Comparing the energy level spectrum and SU(3) flavor decompositions of the individual states, it is found that the lowest two states extracted from lattice QCD can be associated with one of the two Lambda(1405)-poles and the Lambda(1670) resonance. The quark mass dependences of these two lattice QCD levels are in good agreement with their effective theory counterparts. However, as current lattice QCD studies still rely on three-quark operators to generate the physical states, clear signals corresponding to the meson-baryon scattering states, that appear in the finite volume effective theory calculation, are not yet seen.
|
|
|
|
Camarero, D., de Azcarraga, J. A., & Izquierdo, J. M. (2017). Bosonic D=11 supergravity from a generalized Chern-Simons action. Nucl. Phys. B, 923, 633–652.
Abstract: It is shown that the action of the bosonic sector of D= 11supergravity may be obtained by means of a suitable scaling of the originally dimensionless fields of a generalized Chern-Simons action. This follows from the eleven-form CS-potential of the most general linear combination of closed, gauge invariant twelve-forms involving the sp(32)-valued two-form curvatures supplemented by a three-form field. In this construction, the role of the skewsymmetric four-index auxiliary function needed for the first order formulation of D= 11supergravity is played by the gauge field associated with the five Lorentz indices generator of the bosonic sp(32) subalgebra of osp(1|32).
|
|
|
|
Ortega, P. G., Segovia, J., Entem, D. R., & Fernandez, F. (2016). Canonical description of the new LHCb resonances. Phys. Rev. D, 94(11), 114018–7pp.
Abstract: The LHCb Collaboration has recently observed four J/psi phi structures called X(4140), X(4274), X(4500), and X(4700) in the B+ -> J/psi phi K+ decays. We study them herein using a nonrelativistic constituent quark model in which the degrees of freedom are quark-antiquark and meson-meson components. The X(4140) resonance appears as a cusp in the J/psi phi channel due to the near coincidence of the D-s(+/-) D-s(*+/-) and J/psi phi mass thresholds. The remaining three [X(4274), X(4500), and X(4700)] appear as conventional charmonium states with quantum numbers 3(3)P(1), 4(3)P(0), and 5(3)P(0), respectively, and their masses and widths are slightly modified due to their coupling with the corresponding closest meson-meson thresholds. A particular feature of our quark model is a lattice-based screened linear confining interaction that has been constrained in the light-quark sector and usually produces higher excited heavy-quark states with lower masses than standard quark model predictions.
|
|
|
|
Escudero, M., Berlin, A., Hooper, D., & Lin, M. X. (2016). Toward (finally!) ruling out Z and Higgs mediated dark matter models. J. Cosmol. Astropart. Phys., 12(12), 029–21pp.
Abstract: In recent years, direct detection, indirect detection, and collider experiments have placed increasingly stringent constraints on particle dark matter, exploring much of the parameter space associated with the WIMP paradigm. In this paper, we focus on the subset of WIMP models in which the dark matter annihilates in the early universe through couplings to either the Standard Model Z or the Standard Model Higgs boson. Considering fermionic, scalar, and vector dark matter candidates within a model-independent context, we fi nd that the overwhelming majority of these dark matter candidates are already ruled out by existing experiments. In the case of Z mediated dark matter, the only scenarios that are not currently excluded are those in which the dark matter is a fermion with an axial coupling and with a mass either within a few GeV of the Z resonance (m(D M) similar or equal to m(Z)/2) or greater than 200 GeV, or with a vector coupling and with m(DM) > 6TeV. Several Higgs mediated scenarios are currently viable if the mass of the dark matter is near the Higgs pole (m(DM) similar or equal to m(H) /2). Otherwise, the only scenarios that are not excluded are those in which the dark matter is a scalar (vector) heavier than 400 GeV (1160 GeV) with a Higgs portal coupling, or a fermion with a pseudoscalar (CP violating) coupling to the Standard Model Higgs boson. With the exception of dark matter with a purely pseudoscalar coupling to the Higgs, it is anticipated that planned direct detection experiments will probe nearly the entire range of models considered in this study.
|
|
|
|
KM3NeT Collaboration(Adrian-Martinez, S. et al), Barrios-Marti, J., Calvo, D., Hernandez-Rey, J. J., Illuminati, G., Lotze, M., et al. (2016). A method to stabilise the performance of negatively fed KM3NeT photomultipliers. J. Instrum., 11, P12014–12pp.
Abstract: The KM3NeT research infrastructure, currently under construction in the Mediterranean Sea, will host neutrino telescopes for the identification of neutrino sources in the Universe and for studies of the neutrino mass hierarchy. These telescopes will house hundreds of thousands of photomultiplier tubes that will have to be operated in a stable and reliable fashion. In this context, the stability of the dark counts has been investigated for photomultiplier tubes with negative high voltage on the photocathode and held in insulating support structures made of 3D printed nylon material. Small gaps between the rigid support structure and the photomultiplier tubes in the presence of electric fields can lead to discharges that produce dark count rates that are highly variable. A solution was found by applying the same insulating varnish as used for the high voltage bases directly to the outside of the photomultiplier tubes. This transparent conformal coating provides a convenient and inexpensive method of insulation.
|
|
|
|
ATLAS Collaboration(Aaboud, M. et al), Alvarez Piqueras, D., Barranco Navarro, L., Cabrera Urban, S., Castillo Gimenez, V., Cerda Alberich, L., et al. (2016). A measurement of material in the ATLAS tracker using secondary hadronic interactions in 7 TeV p p collisions. J. Instrum., 11, P11020–41pp.
Abstract: Knowledge of the material in the ATLAS inner tracking detector is crucial in under-standing the reconstruction of charged-particle tracks, the performance of algorithms that identify jets containing b-hadrons and is also essential to reduce background in searches for exotic particles that can decay within the inner detector volume. Interactions of primary hadrons produced in pp collisions with the material in the inner detector are used to map the location and amount of this material. The hadronic interactions of primary particles may result in secondary vertices, which in this analysis are reconstructed by an inclusive vertex-finding algorithm. Data were collected using minimum-bias triggers by the ATLAS detector operating at the LHC during 2010 at centre-of-mass energy root s = 7 TeV, and correspond to an integrated luminosity of 19 nb(-1). Kinematic properties of these secondary vertices are used to study the validity of the modelling of hadronic interactions in simulation. Secondary-vertex yields are compared between data and simulation over a volume of about 0.7m(3) around the interaction point, and agreement is found within overall uncertainties.
|
|
|
|
Albiol, F., Corbi, A., & Albiol, A. (2017). 3D measurements in conventional X-ray imaging with RGB-D sensors. Med. Eng. Phys., 42, 73–79.
Abstract: A method for deriving 3D internal information in conventional X-ray settings is presented. It is based on the combination of a pair of radiographs from a patient and it avoids the use of X-ray-opaque fiducials and external reference structures. To achieve this goal, we augment an ordinary X-ray device with a consumer RGB-D camera. The patient' s rotation around the craniocaudal axis is tracked relative to this camera thanks to the depth information provided and the application of a modern surface-mapping algorithm. The measured spatial information is then translated to the reference frame of the X-ray imaging system. By using the intrinsic parameters of the diagnostic equipment, epipolar geometry, and X-ray images of the patient at different angles, 3D internal positions can be obtained. Both the RGB-D and Xray instruments are first geometrically calibrated to find their joint spatial transformation. The proposed method is applied to three rotating phantoms. The first two consist of an anthropomorphic head and a torso, which are filled with spherical lead bearings at precise locations. The third one is made of simple foam and has metal needles of several known lengths embedded in it. The results show that it is possible to resolve anatomical positions and lengths with a millimetric level of precision. With the proposed approach, internal 3D reconstructed coordinates and distances can be provided to the physician. It also contributes to reducing the invasiveness of ordinary X-ray environments and can replace other types of clinical explorations that are mainly aimed at measuring or geometrically relating elements that are present inside the patient's body.
|
|
|
|
Miyahara, K., Hyodo, T., Oka, M., Nieves, J., & Oset, E. (2017). Theoretical study of the Xi(1620) and Xi(1690) resonances in Xi(c)-> pi(+) MB decays. Phys. Rev. C, 95(3), 035212–12pp.
Abstract: Nonleptonic weak decays of Xi(c) into pi(+) and a meson (M)-baryon (B) final state, MB, are analyzed from the viewpoint of probing S = -2 baryon resonances, i.e., Xi(1620) and Xi(1690), of which spin-parity and other properties are not well known. We argue that the weak decay of Xi(c) is dominated by a single quark-line diagram, preferred by the Cabibbo-Kobayashi-Maskawa coefficient, color recombination factor, the diquark correlation, and the kinematical condition. The decay process has an advantage of being free from meson resonances in the p+ M invariantmass distribution. The invariant mass distribution of the meson-baryon final state is calculated with three different chiral unitary approaches, assuming that the Xi(1620) and Xi(1690) resonances have J(P) = 1/2(-). It is found that a clear peak for the Xi(1690) is seen in the pi Xi and K Lambda spectra. We also suggest that the ratios of the pi Xi, K Lambda, and K Sigma final states are useful to distinguish whether the peak is originated from the Xi(1690) resonance or it is a K Sigma threshold effect.
|
|
