|
|
Martins, A., da Mota, A. F., Stanford, C., Contreras, T., Martin-Albo, J., Kish, A., et al. (2024). Simple strategy for the simulation of axially symmetric large-area metasurfaces. J. Opt. Soc. Am. B, 41(5), 1261–1269.
Abstract: Metalenses are composed of nanostructures for focusing light and have been widely explored in many exciting applications. However, their expanding dimensions pose simulation challenges. We propose a method to simulate metalenses in a timely manner using vectorial wave and ray tracing models. We sample the metalens's radial phase gradient and locally approximate the phase profile by a linear phase response. Each sampling point is modeled as a binary blazed grating, employing the chosen nanostructure, to build a transfer function set. The metalens transmission or reflection is then obtained by applying the corresponding transfer function to the incoming field on the regions surrounding each sampling point. Fourier optics is used to calculate the scattered fields under arbitrary illumination for the vectorial wave method, and a Monte Carlo algorithm is used in the ray tracing formalism. We validated our method against finite -difference time domain simulations at 632 nm, and we were able to simulate metalenses larger than 3000 wavelengths in diameter on a personal computer.
|
|
|
|
Martinez-Reviriego, P., Esperante, D., Grudiev, A., Gimeno, B., Blanch, C., Gonzalez-Iglesias, D., et al. (2024). Dielectric assist accelerating structures for compact linear accelerators of low energy particles in hadrontherapy treatments. Front. Physics, 12, 1345237–12pp.
Abstract: Dielectric Assist Accelerating (DAA) structures based on ultralow-loss ceramic are being studied as an alternative to conventional disk-loaded copper cavities. This accelerating structure consists of dielectric disks with irises arranged periodically in metallic structures working under the TM02-pi mode. In this paper, the numerical design of an S-band DAA structure for low beta particles, such as protons or carbon ions used for Hadrontherapy treatments, is shown. Four dielectric materials with different permittivity and loss tangent are studied as well as different particle velocities. Through optimization, a design that concentrates most of the RF power in the vacuum space near the beam axis is obtained, leading to a significant reduction of power loss on the metallic walls. This allows to fabricate cavities with an extremely high quality factor, over 100,000, and shunt impedance over 300 M omega/m at room temperature. During the numerical study, the design optimization has been improved by adjusting some of the cell parameters in order to both increase the shunt impedance and reduce the peak electric field in certain locations of the cavity, which can lead to instabilities in its normal functioning.
|
|
|
|
Martinez-Mirave, P., Tamborra, I., & Tortola, M. (2024). The Sun and core-collapse supernovae are leading probes of the neutrino lifetime. J. Cosmol. Astropart. Phys., 05(5), 002–39pp.
Abstract: The large distances travelled by neutrinos emitted from the Sun and core -collapse supernovae together with the characteristic energy of such neutrinos provide ideal conditions to probe their lifetime, when the decay products evade detection. We investigate the prospects of probing invisible neutrino decay capitalising on the detection of solar and supernova neutrinos as well as the diffuse supernova neutrino background (DSNB) in the next -generation neutrino observatories Hyper-Kamiokande, DUNE, JUNO, DARWIN, and RES-NOVA. We find that future solar neutrino data will be sensitive to values of the lifetime -to -mass ratio tau 1 /m 1 and tau 2 /m 2 of O(10 – 1 -10 – 2 ) s/eV. From a core -collapse supernova explosion at 10 kpc, lifetime -to -mass ratios of the three mass eigenstates of O(10 5 ) s/eV could be tested. After 20 years of data taking, the DSNB would extend the sensitivity reach of tau 1 /m 1 to 10 8 s/eV. These results promise an improvement of about 6-15 orders of magnitude on the values of the decay parameters with respect to existing limits.
|
|
|
|
Martin-Luna, P., Esperante, D., Prieto, A. F., Fuster-Martinez, N., Rivas, I. G., Gimeno, B., et al. (2024). Simulation of electron transport and secondary emission in a photomultiplier tube and validation. Sens. Actuator A-Phys., 365, 114859–10pp.
Abstract: The electron amplification and transport within a photomultiplier tube (PMT) has been investigated by developing an in-house Monte Carlo simulation code. The secondary electron emission in the dynodes is implemented via an effective electron model and the Modified Vaughan's model, whereas the transport is computed with the Boris leapfrog algorithm. The PMT gain, rise time and transit time have been studied as a function of supply voltage and external magnetostatic field. A good agreement with experimental measurements using a Hamamatsu R13408-100 PMT was obtained. The simulations have been conducted following different treatments of the underlying geometry: three-dimensional, two-dimensional and intermediate (2.5D). The validity of these approaches is compared. The developed framework will help in understanding the behavior of PMTs under highly intense and irregular illumination or varying external magnetic fields, as in the case of prompt gamma-ray measurements during pencil-beam proton therapy; and aid in optimizing the design of voltage dividers with behavioral circuit models.
|
|
|
|
Maji, R., & Park, W. I. (2024). Supersymmetric U(1)B-L flat direction and NANOGrav 15 year data. J. Cosmol. Astropart. Phys., 01(1), 015–19pp.
Abstract: We show that, when connected with monopoles, the flat D-flat direction breaking the local U(1)B-L symmetry as an extension of the minimal supersymmetric standard model can be responsible for the signal of a stochastic gravitational wave background recently reported by NANOGrav collaborations, while naturally satisfying constraints at high frequency band. Thanks to the flatness of the direction, a phase of thermal inflation arises naturally. The reheating temperature is quite low, and suppresses signals at frequencies higher than the characteristic frequency set by the reheating temperature. Notably, forthcoming spaced based experiments such as LISA can probe the cutoff frequency, providing an indirect clue of the scale of soft SUSY-breaking mass parameter.
|
|
|
|
Lin, J. X., Li, J. T., Liang, W. H., Chen, H. X., & Oset, E. (2024). J/ψ decays into ω(φ) f1(1285) and ω(φ) “f1(1420)”. Eur. Phys. J. C, 84(1), 52–8pp.
Abstract: We perform a theoretical study of the J/psi -> omega (Phi)K* K + c.c. -> omega(Phi)K-0 pi+ K- reactions with the assumption that the f1(1285) is dynamically generated from a single channel K*K + c.c interaction in the chiral unitary approach. Two peaks in the K-0 pi+ K- invariant mass distribution are observed, one clear peak locates at the f(1)(1285) nominal mass, the other peak locates at around 1420MeV with about 70MeV width. We conclude that the former peak is associated with the f(1)(1285) and the latter peak is not a genuine resonance but a manifestation of the kinematic effect in the higher energy region caused by the K* K + c.c. decay mode of the f(1)(1285).
|
|
|
|
Lin, J. X., Chen, H. X., Liang, W. H., Xiao, C. W., & Oset, E. (2024). (B)over-bars0 → Ds1(2460)+ K-, Ds1(2536)+ K- and the nature of the two Ds1 resonances. Eur. Phys. J. C, 84(4), 439–8pp.
Abstract: Starting from the molecular picture for the D-s1(2460) and D-s1(2536) resonances, which are dynamically generated by the interaction of coupled channels, the most important of which are the D* K for the D-s1(2460) and DK* for the D-s1(2536), we evaluate the ratio of decay widths for the (B) over bar (0)(s) -> D-s1(2460)(+) K- and (B) over bar (0)(s) -> D-s1(2536)(+) K- decays, the latter of which has been recently investigated by the LHCb collaboration, and we obtain a ratio of the order of unity. The present results should provide an incentive for the related decay into the D-s1(2460) resonance to be performed, which would provide valuable information on the nature of these two resonances.
|
|
|
|
Liang, W. H., Ban, T., & Oset, E. (2024). B0 → K(*)0X, B- K(*) -X, Bs-η(η1;φ)X from the X(3872) molecular perspective. Phys. Rev. D, 109(5), 054030–9pp.
Abstract: We study the decays B over bar 0 – over bar K0X, B- – K-X, B over bar 0s – eta(eta 1)X, B over bar 0 – over bar K*0X, B- – K*-X, B over bar 0s – phi X, with X equivalent to X(3872), from the perspective of the X(3872) being a molecular state made from the interaction of the D*+D-; D*0 over bar D0, and c:c: components. We consider both the external and internal emission decay mechanisms and find an explanation for the over bar K0X and K-X production rates, based on the mass difference of the charged and neutral D*D over bar components. We also find that the internal and external emission mechanisms add constructively in the B over bar 0 – over bar K0X, B- – K-X reactions, while they add destructively in the case of widths of the present measurements and allows us to make predictions for the unmeasured modes of B over bar 0s – eta(eta 1)X(3872) and B- – K*-X(3872). The future measurement of these decay modes will help us get a better perspective on the nature of the X(3872) and the mechanisms present in production reactions of that state. B over bar 0 – over bar K*0X, B- – K*-X reactions. This feature explains the decay
|
|
|
|
Li, H. P., Yi, J. Y., Xiao, C. W., Yao, D. L., Liang, W. H., & Oset, E. (2024). Correlation function and the inverse problem in the BD interaction. Chin. Phys. C, 48(5), 053107–7pp.
Abstract: We study the correlation functions of the (BD+)-D-0, (B+D0) system, which develops a bound state of approximately 40MeV, using inputs consistent with the T-cc(3875) state. Then, we address the inverse problem starting from these correlation functions to determine the scattering observables related to the system, including the existence of the bound state and its molecular nature. The important output of the approach is the uncertainty with which these observables can be obtained, considering errors in the (BD+)-D-0, (B+D0) correlation functions typical of current values in correlation functions. We find that it is possible to obtain scattering lengths and effective ranges with relatively high precision and the existence of a bound state. Although the pole position is obtained with errors of the order of 50% of the binding energy, the molecular probability of the state is obtained with a very small error of the order of 6%. All these findings serve as motivation to perform such measurements in future runs of high energy hadron collisions.
|
|
|
|
LHCb Collaboration(Aaij, R. et al), Jaimes Elles, S. J., Jashal, B. K., Martinez-Vidal, F., Oyanguren, A., Rebollo De Miguel, M., et al. (2024). Study of Bc+ → χc π+ decays. J. High Energy Phys., 02(2), 173–30pp.
Abstract: A study of B-c(+) -> chi(c) pi(+) decays is reported using proton-proton collision data, collected with the LHCb detector at centre-of-mass energies of 7, 8, and 13TeV, corresponding to an integrated luminosity of 9 fb(-1). The decay B-c(+) -> chi(c2)pi(+) is observed for the first time, with a significance exceeding seven standard deviations. The relative branching fraction with respect to the B-c(+) -> J/psi pi(+) decay is measured to be BBc+ ->chi c2 pi+/BBc+ -> (J/psi pi+) = 0.37 +/- 0.06 +/- 0.02 +/- 0.01, where the first uncertainty is statistical, the second is systematic, and the third is due to the knowledge of the chi(c2) -> J/psi gamma branching fraction. No significant B-c(+) -> chi(+)(c1 pi) signal is observed and an upper limit for the relative branching fraction for the B-c(+) -> chi(c1)pi(+) and B-c(+) -> chi(c2)pi(+) decays of BBc+ ->chi c1 pi+/BBc+ -> chi(c2)pi(+) < 0.49 is set at the 90% confidence level.
|
|
