Sakai, S., Oset, E., & Guo, F. K. (2020). Triangle singularity in the B-> K- pi X-0 (3872) reaction and sensitivity to the X(3872) mass. Phys. Rev. D, 101(5), 054030–10pp.
Abstract: We have done a study of the B--> K-pi X-0(3872) reaction by means of a triangle mechanism via the chain of reactions: B--> K-D*(0);(D) over bar*(0); D*(0)-> pi D-0(0); D-0(D) over bar*(0)-> X(3872). We show that this mechanism generates a triangle singularity in the pi X-0(3872) invariant mass for a very narrow window of the X(3872) mass, around the present measured values, and show that the peak positions and the shape of the mass distributions arc sensitive to the X(3872) mass, such that a measurement of the reaction can serve to improve on the present values of this mass. In particular, we point out that the X(3872) mass relative to the D-0(D) over bar*(0) threshold may be extracted from the asymmetry of the pi X-0 line shape.
|
Sakai, S., Liang, W. H., Toledo, G., & Oset, E. (2020). J/psi -> gamma pi pi, gamma pi(0)eta reactions and the f(0)(980) and a(0)(980) resonances. Phys. Rev. D, 101(1), 014005–9pp.
Abstract: We study the J/psi -> gamma pi(+)pi(-), gamma pi(0)eta reactions from the perspective that they come from the J/psi -> phi(omega)pi(+)pi(-), rho(0)pi(0)eta reactions, where the rho(0), psi, and phi get converted into a photon via vector meson dominance. Using models successfully used previously to study the J/psi -> omega(phi)pi pi reactions, we make determinations of the invariant mass distributions for pi(+)pi(-) in the regions of the f(0)(500), f(0)(980), and for pi(0)eta in the region of the a(0)(980). The integrated differential widths lead to branching ratios below present upper bounds, but they are sufficiently large for future check in updated facilities.
|
Saha, S., Arici, T., Gerl, J., Gorska, M., Pietralla, N., Davinson, T., et al. (2020). On the 6-detection efficiency of a combined Si and plastic stack detector for DESPEC. Nucl. Instrum. Methods Phys. Res. A, 975, 164196–8pp.
Abstract: A Geant4 simulation has been carried out in order to determine the beta-detection efficiency of a rare isotope beam implantation setup, for decay spectroscopy experiments, comprising a number of Double Sided Silicon Strip Detectors (DSSSDs) and two plastic scintillation detectors placed upstream and downstream. The absolute efficiency for the emitted beta-particle detection from radioactive fragments implanted in the DSSSDs using fast-timing plastic-scintillator detector, is calculated. The detection efficiency of the setup has been studied with two different distances between the Si layers and plastics. The requirement for the thickness of the Si detector layers and its implication on the beta-detection efficiency has been investigated for 1 mm and 300 µm thickness of Si layers. The combined efficiency of DSSSD and plastic detectors were also simulated for two different thicknesses of the DSSSD.
|
n_TOF Collaboration(Sabate-Gilarte et al.), Domingo-Pardo, C., Tain, J. L., & Tarifeño-Saldivia, A. (2017). High-accuracy determination of the neutron flux in the new experimental area n_TOF-EAR2 at CERNx. Eur. Phys. J. A, 53(10), 210–13pp.
Abstract: A new high flux experimental area has recently become operational at the nTOF facility at CERN. This new measuring station, nTOF-EAR2, is placed at the end of a vertical beam line at a distance of approximately 20m from the spallation target. The characterization of the neutron beam, in terms of flux, spatial profile and resolution function, is of crucial importance for the feasibility study and data analysis of all measurements to be performed in the new area. In this paper, the measurement of the neutron flux, performed with different solid-state and gaseous detection systems, and using three neutronconverting reactions considered standard in different energy regions is reported. The results of the various measurements have been combined, yielding an evaluated neutron energy distribution in a wide energy range, from 2meV to 100MeV, with an accuracy ranging from 2%, at low energy, to 6% in the high-energy region. In addition, an absolute normalization of the n_TOF-EAR2 neutron flux has been obtained by means of an activation measurement performed with 197 Au foils in the beam.
|
Ruhr, F. et al, Escobar, C., & Miñano, M. (2020). Testbeam studies of barrel and end-cap modules for the ATLAS ITk strip detector before and after irradiation. Nucl. Instrum. Methods Phys. Res. A, 979, 164430–6pp.
Abstract: In order to cope with the occupancy and radiation doses expected at the High-Luminosity LHC, the ATLAS experiment will replace its Inner Detector with an all-silicon Inner Tracker (ITk), consisting of pixel and strip subsystems. In the last two years, several prototype ITk strip modules have been tested using beams of high energy electrons produced at the DESY-II testbeam facility. Tracking was provided by EUDET telescopes. The modules tested are built from two sensor types: the rectangular ATLAS17LS, which will be used in the outer layers of the central barrel region of the detector, and the annular ATLAS12EC, which will be used in the innermost ring (R0) of the forward region. Additionally, a structure with two RO modules positioned back-to-back has been measured, demonstrating space point reconstruction using the stereo angle of the strips. Finally, one barrel and one RO module have been measured after irradiation to 40% beyond the expected end-of-lifetime fluence. The data obtained allow for thorough tests of the module performance, including charge collection, noise occupancy, detection efficiency, and tracking performance. The results give confidence that the ITk strip detector will meet the requirements of the ATLAS experiment.
|
