|
Agramunt, J. et al, Tain, J. L., Albiol, F., Algora, A., Domingo-Pardo, C., Jordan, M. D., et al. (2016). Characterization of a neutron-beta counting system with beta-delayed neutron emitters. Nucl. Instrum. Methods Phys. Res. A, 807, 69–78.
Abstract: A new detection system for the measurement of beta-delayed neutron emission probabilities has been characterized using fission products with well known beta-delayed neutron emission properties. The setup consists of BELEN-20, a 4 pi-neutron counter with twenty He-3 proportional tubes arranged inside a large polyethylene neutron moderator, a thin Si detector for beta counting and a self-triggering digital data acquisition system. The use of delayed-neutron precursors with different neutron emission windows allowed the study of the effect of energy dependency on neutron, beta and beta-neutron rates. The observed effect is well reproduced by Monte Carlo simulations. The impact of this dependency on the accuracy of neutron emission probabilities is discussed. A new accurate value of the neutron emission probability for the important delayed-neutron precursor I-137 was obtained, P-n = 7.76(14)%.
|
|
|
Aguilar, A. C., Binosi, D., Figueiredo, C. T., & Papavassiliou, J. (2016). Unified description of seagull cancellations and infrared finiteness of gluon propagators. Phys. Rev. D, 94(4), 045002–22pp.
Abstract: We present a generalized theoretical framework for dealing with the important issue of dynamical mass generation in Yang-Mills theories, and, in particular, with the infrared finiteness of the gluon propagators, observed in a multitude of recent lattice simulations. Our analysis is manifestly gauge invariant, in the sense that it preserves the transversality of the gluon self-energy, and gauge independent, given that the conclusions do not depend on the choice of the gauge-fixing parameter within the linear covariant gauges. The central construction relies crucially on the subtle interplay between the Abelian Ward identities satisfied by the nonperturbative vertices and a special integral identity that enforces a vast number of “seagull cancellations” among the one-and two-loop dressed diagrams of the gluon Schwinger-Dyson equation. The key result of these considerations is that the gluon propagator remains rigorously massless, provided that the vertices do not contain (dynamical) massless poles. When such poles are incorporated into the vertices, under the pivotal requirement of respecting the gauge symmetry of the theory, the terms comprising the Ward identities conspire in such a way as to still enforce the total annihilation of all quadratic divergences, inducing, at the same time, residual contributions that account for the saturation of gluon propagators in the deep infrared.
|
|
|
Aguilar, A. C., Binosi, D., & Papavassiliou, J. (2016). The gluon mass generation mechanism: A concise primer. Front. Phys., 11(2), 111203–18pp.
Abstract: We present a pedagogical overview of the nonperturbative mechanism that endows gluons with a dynamical mass. This analysis is performed based on pure Yang-Mills theories in the Landau gauge, within the theoretical framework that emerges from the combination of the pinch technique with the background field method. In particular, we concentrate on the Schwinger-Dyson equation satisfied by the gluon propagator and examine the necessary conditions for obtaining finite solutions within the infrared region. The role of seagull diagrams receives particular attention, as do the identities that enforce the cancellation of all potential quadratic divergences. We stress the necessity of introducing nonperturbative massless poles in the fully dressed vertices of the theory in order to trigger the Schwinger mechanism, and explain in detail the instrumental role of these poles in maintaining the Becchi-Rouet-Stora-Tyutin symmetry at every step of the mass-generating procedure. The dynamical equation governing the evolution of the gluon mass is derived, and its solutions are determined numerically following implementation of a set of simplifying assumptions. The obtained mass function is positive definite, and exhibits a power law running that is consistent with general arguments based on the operator product expansion in the ultraviolet region. A possible connection between confinement and the presence of an inflection point in the gluon propagator is briefly discussed.
|
|
|
Aguilar-Saavedra, J. A., & Bernabeu, J. (2016). Breaking down the entire W boson spin observables from its decay. Phys. Rev. D, 93(1), 011301–6pp.
Abstract: We discuss the eight independent spin observables for the W boson in terms of its vector and tensor polarizations and identify the angular distributions and asymmetries able to separate them in collider experiments. The results are applied to the study of polarized top quark decays and diboson resonances. These novel observables are of great value for disentangling new physics mechanisms in W boson production.
|
|
|
Albaladejo, M., Nieves, J., Oset, E., & Jido, D. (2016). Ds0*(2317) and DK scattering in B decays from BaBar and LHCb data. Eur. Phys. J. C, 76(6), 300–8pp.
Abstract: We study the experimental DK invariant mass spectra of the reactions B+ -> (D) over bar (DK+)-D-0-K-0, B-0 -> D-(DK+)-K-0 (measured by the BaBar collaboration) and B-s -> pi(+DK-)-K-0 measured by the LHCb collaboration), where an enhancement right above the threshold is seen. We show that this enhancement is due to the presence of D-s0*(2317), which is a D K bound state in the I (J(P)) = 0(0(+)) sector. We employ a unitarized amplitude with an interaction potential fixed by heavy meson chiral perturbation theory. We obtain a mass M-Ds0* = 2315(-17) (+12 +10)(-5) MeV, and we also show, by means of theWeinberg compositeness condition, that the DK component in the wave function of this state is P-DK = 70(-6 -8)(+4 +4) %, where the first (second) error is statistical (systematic).
|
|
|
Albaladejo, M., Fernandez-Soler, P., & Nieves, J. (2016). Z(c)(3900): confronting theory and lattice simulations. Eur. Phys. J. C, 76(10), 573–9pp.
Abstract: We consider a recent T -matrix analysis by Albaladejo et al. (Phys Lett B 755: 337, 2016), which accounts for the J/psi pi and D*(D) over bar coupled-channels dynamics, and which successfully describes the experimental information concerning the recently discovered Z(c)(3900)(+/-). Within such scheme, the data can be similarly well described in two different scenarios, where Z(c)(3900) is either a resonance or a virtual state. To shed light into the nature of this state, we apply this formalism in a finite box with the aim of comparing with recent Lattice QCD (LQCD) simulations. We see that the energy levels obtained for both scenarios agree well with those obtained in the single-volume LQCD simulation reported in Prelovsek et al. (Phys Rev D 91: 014504, 2015), thus making it difficult to disentangle the two possibilities. We also study the volume dependence of the energy levels obtained with our formalism and suggest that LQCD simulations performed at several volumes could help in discerning the actual nature of the intriguing Z(c)(3900) state.
|
|
|
Albaladejo, M., Guo, F. K., Hidalgo-Duque, C., & Nieves, J. (2016). Z(c)(3900): What has been really seen? Phys. Lett. B, 755, 337–342.
Abstract: The Z(c)(+/-)(3900)/Z(c)(+/-)(3885) resonant structure has been experimentally observed in the Y(4260) -> J/Psi pi pi and Y(4260) -> (D) over bar* D pi decays. This structure is intriguing since it is a prominent candidate of an exotic hadron. Yet, its nature is unclear so far. In this work, we simultaneously describe the (D) over bar* D and J/Psi pi invariant mass distributions in which the Z(c) peak is seen using amplitudes with exact unitarity. Two different scenarios are statistically acceptable, where the origin of the Z(c) state is different. They correspond to using energy dependent or independent (D) over bar *D S-wave interaction. In the first one, the Z(c) peak is due to a resonance with a mass around the D (D) over bar* threshold. In the second one, the Z(c) peak is produced by a virtual state which must have a hadronic molecular nature. In both cases the two observations, Z(c)(+/-)(3900) and Z(c)(+/-)(3885), are shown to have the same common origin, and a (D) over bar *D bound state solution is not allowed. Precise measurements of the line shapes around the D (D) over bar* threshold are called for in order to understand the nature of this state.
|
|
|
Albaladejo, M., Nieves, J., Oset, E., Sun, Z. F., & Liu, X. (2016). Can X(5568) be described as a B-s pi, B(K)over-bar resonant state? Phys. Lett. B, 757, 515–519.
Abstract: The DO Collaboration has recently seen a resonant-like peak in the B-s pi invariant mass spectrum, claimed to be a new state called X(5568). Using a B-s pi-B (K) over bar coupled channel analysis, implementing unitarity, and with the interaction derived from Heavy Meson Chiral Perturbation Theory, we are able to reproduce the reported spectrum, with a pole that can be associated to the claimed X(5568) state, and with mass and width in agreement with the ones reported in the experimental analysis. However, if the T-matrix regularization is performed by means of a momentum cutoff, the value for the latter needed to reproduce the spectrum is Lambda = 2.80 +/- 0.04 GeV, which is much larger than a “natural” value Lambda similar or equal to 1 GeV. In view of this, it is difficult to interpret the nature of this new state. This state would not qualify as a resonance dynamically generated by the unitarity loops. Assuming the observed peak to correspond to a physical state, we make predictions for partners in the D, D*, and B* sectors. Their observation (or lack thereof) would shed light into this issue.
|
|
|
KM3NeT Collaboration(Adrian-Martinez, S. et al), Barrios-Marti, J., Calvo, D., Hernandez-Rey, J. J., Illuminati, G., Lotze, M., et al. (2016). A method to stabilise the performance of negatively fed KM3NeT photomultipliers. J. Instrum., 11, P12014–12pp.
Abstract: The KM3NeT research infrastructure, currently under construction in the Mediterranean Sea, will host neutrino telescopes for the identification of neutrino sources in the Universe and for studies of the neutrino mass hierarchy. These telescopes will house hundreds of thousands of photomultiplier tubes that will have to be operated in a stable and reliable fashion. In this context, the stability of the dark counts has been investigated for photomultiplier tubes with negative high voltage on the photocathode and held in insulating support structures made of 3D printed nylon material. Small gaps between the rigid support structure and the photomultiplier tubes in the presence of electric fields can lead to discharges that produce dark count rates that are highly variable. A solution was found by applying the same insulating varnish as used for the high voltage bases directly to the outside of the photomultiplier tubes. This transparent conformal coating provides a convenient and inexpensive method of insulation.
|
|
|
Albiol, F., Corbi, A., & Albiol, A. (2016). Geometrical Calibration of X-Ray Imaging With RGB Cameras for 3D Reconstruction. IEEE Trans. Med. Imaging, 35(8), 1952–1961.
Abstract: We present a methodology to recover the geometrical calibration of conventional X-ray settings with the help of an ordinary video camera and visible fiducials that are present in the scene. After calibration, equivalent points of interest can be easily identifiable with the help of the epipolar geometry. The same procedure also allows the measurement of real anatomic lengths and angles and obtains accurate 3D locations from image points. Our approach completely eliminates the need for X-ray-opaque reference marks (and necessary supporting frames) which can sometimes be invasive for the patient, occlude the radiographic picture, and end up projected outside the imaging sensor area in oblique protocols. Two possible frameworks are envisioned: a spatially shifting X-ray anode around the patient/object and a moving patient that moves/rotates while the imaging system remains fixed. As a proof of concept, experiences with a device under test (DUT), an anthropomorphic phantom and a real brachytherapy session have been carried out. The results show that it is possible to identify common points with a proper level of accuracy and retrieve three-dimensional locations, lengths and shapes with a millimetric level of precision. The presented approach is simple and compatible with both current and legacy widespread diagnostic X-ray imaging deployments and it can represent a good and inexpensive alternative to other radiological modalities like CT.
|
|