|
ATLAS Collaboration(Aaboud, M. et al), Alvarez Piqueras, D., Aparisi Pozo, J. A., Bailey, A. J., Barranco Navarro, L., Cabrera Urban, S., et al. (2019). Measurement of ZZ production in the ll nu nu final state with the ATLAS detector in pp collisions at root s=13 TeV. J. High Energy Phys., 10(10), 127–48pp.
Abstract: This paper presents a measurement of ZZ production with the ATLAS detector at the Large Hadron Collider. The measurement is carried out in the final state with two charged leptons and two neutrinos, using data collected during 2015 and 2016 in pp collisions at root s = 13 TeV, corresponding to an integrated luminosity of 36.1 fb(-1). The integrated cross-sections in the total and fiducial phase spaces are measured with an uncertainty of 7% and compared with Standard Model predictions, and differential measurements in the fiducial phase space are reported. No significant deviations from the Standard Model predictions are observed, and stringent constraints are placed on anomalous couplings corresponding to neutral triple gauge-boson interactions.
|
|
|
ATLAS Collaboration(Aad, G. et al), Alvarez Piqueras, D., Aparisi Pozo, J. A., Bailey, A. J., Barranco Navarro, L., Cabrera Urban, S., et al. (2020). Transverse momentum and process dependent azimuthal anisotropies in root S-NN=8.16 TeV p plus Pb collisions with the ATLAS detector. Eur. Phys. J. C, 80(1), 73–31pp.
Abstract: The azimuthal anisotropy of charged particles produced in sNN=8.16TeV p+Pb collisions is measured with the ATLAS detector at the LHC. The data correspond to an integrated luminosity of 165 nb-1 that was collected in 2016. Azimuthal anisotropy coefficients, elliptic v2 and triangular v3\, extracted using two-particle correlations with a non-flow template fit procedure, are presented as a function of particle transverse momentum (pT) between 0.5 and 50 GeV. The v2 results are also reported as a function of centrality in three different particle pTintervals. The results are reported from minimum-bias events and jet-triggered events, where two jet pT thresholds are used. The anisotropies for particles with pT less than about 2 GeV are consistent with hydrodynamic flow expectations, while the significant non-zero anisotropies for pT in the range 9-50 GeV are not explained within current theoretical frameworks. In the pTrange 2-9 GeV, the anisotropies are larger in minimum-bias than in jet-triggered events. Possible origins of these effects, such as the changing admixture of particles from hard scattering and the underlying event, are discussed.
|
|
|
ATLAS Collaboration(Aaboud, M. et al), Alvarez Piqueras, D., Bailey, A. J., Barranco Navarro, L., Cabrera Urban, S., Carrio Argos, F., et al. (2018). Operation and performance of the ATLAS Tile Calorimeter in Run 1. Eur. Phys. J. C, 78(12), 987–48pp.
Abstract: The Tile Calorimeter is the hadron calorimeter covering the central region of the ATLAS experiment at the Large Hadron Collider. Approximately 10,000 photomultipliers collect light from scintillating tiles acting as the active material sandwiched between slabs of steel absorber. This paper gives an overview of the calorimeter's performance during the years 2008-2012 using cosmic-ray muon events and proton-proton collision data at centre-of-mass energies of 7 and 8 TeV with a total integrated luminosity of nearly 30 fb(-1). The signal reconstruction methods, calibration systems as well as the detector operation status are presented. The energy and time calibration methods performed excellently, resulting in good stability of the calorimeter response under varying conditions during the LHC Run 1. Finally, the Tile Calorimeter response to isolated muons and hadrons as well as to jets from proton-proton collisions is presented. The results demonstrate excellent performance in accord with specifications mentioned in the Technical Design Report.
|
|
|
ATLAS Collaboration(Aaboud, M. et al), Alvarez Piqueras, D., Barranco Navarro, L., Cabrera Urban, S., Castillo Gimenez, V., Cerda Alberich, L., et al. (2018). Search for electroweak production of supersymmetric particles in final states with two or three leptons at root s=13 Tev with the ATLAS detector. Eur. Phys. J. C, 78(12), 995–36pp.
Abstract: A search for the electroweak production of charginos, neutralinos and sleptons decaying into final states involving two or three electrons or muons is presented. The analysis is based on 36.1 fb(-1) of root s = 13 TeV protonproton collisions recorded by the ATLAS detector at the Large Hadron Collider. Several scenarios based on simplified models are considered. These include the associated production of the next-to-lightest neutralino and the lightest chargino, followed by their decays into final states with leptons and the lightest neutralino via either sleptons or Standard Model gauge bosons; direct production of chargino pairs, which in turn decay into leptons and the lightest neutralino via intermediate sleptons; and slepton pair production, where each slepton decays directly into the lightest neutralino and a lepton. No significant deviations from the Standard Model expectation are observed and stringent limits at 95% confidence level are placed on the masses of relevant supersymmetric particles in each of these scenarios. For a massless lightest neutralino, masses up to 580 GeV are excluded for the associated production of the next-to-lightest neutralino and the lightest chargino, assuming gauge-boson mediated decays, whereas for slepton-pair production masses up to 500 GeV are excluded assuming three generations of mass-degenerate sleptons.
|
|
|
ATLAS Collaboration(Aad, G. et al), Alvarez Piqueras, D., Aparisi Pozo, J. A., Bailey, A. J., Cabrera Urban, S., Castillo, F. L., et al. (2020). Measurement of the Z(-> l(+)l(-))gamma production cross-section in pp collisions at root s=13 TeV with the ATLAS detector. J. High Energy Phys., 03(3), 054–52pp.
Abstract: The production of a prompt photon in association with a Z boson is studied in proton-proton collisions at a centre-of-mass energy s = 13 TeV. The analysis uses a data sample with an integrated luminosity of 139 fb(-1) collected by the ATLAS detector at the LHC from 2015 to 2018. The production cross-section for the process pp -> l(+)l(-)gamma + X (l = e, mu) is measured within a fiducial phase-space region defined by kinematic requirements on the photon and the leptons, and by isolation requirements on the photon. An experimental precision of 2.9% is achieved for the fiducial cross-section. Differential cross-sections are measured as a function of each of six kinematic variables characterising the l(+)l(-)gamma system. The data are compared with theoretical predictions based on next-to-leading-order and next-to-next-to-leading-order perturbative QCD calculations. The impact of next-to-leading-order electroweak corrections is also considered.
|
|
|
ATLAS Collaboration(Aad, G. et al), Aparisi Pozo, J. A., Bailey, A. J., Cabrera Urban, S., Cardillo, F., Castillo, F. L., et al. (2021). Exclusive dimuon production in ultraperipheral Pb plus Pb collisions at root S-NN=5.02 TeV with ATLAS. Phys. Rev. C, 104(2), 024906–32pp.
Abstract: Exclusive dimuon production in ultraperipheral collisions (UPC), resulting from photon-photon interactions in the strong electromagnetic fields of colliding high-energy lead nuclei, PbPb(gamma gamma) -> mu(+) mu(-) (Pb-(*Pb-)(()*())), is studied using L-int = 0.48 nb(-1) of root S-NN = 5.02 TeV lead-lead collision data at the LHC with the ATLAS detector. Dimuon pairs are measured in the fiducial region p(T,mu) > 4 GeV, vertical bar eta(mu)vertical bar < 2.4, invariant m(mu mu) > 10 GeV, and p(T,mu mu) <2 GeV. The primary background from single-dissociative processes is extracted from the data using a template fitting technique. Differential cross sections are presented as a function of m(mu mu), absolute pair rapidity (vertical bar y(mu mu)vertical bar), scattering angle in the dimuon rest frame (vertical bar cos v*(mu mu)vertical bar), and the colliding photon energies. The total cross section of the UPC gamma gamma -> mu(+) mu(-) process in the fiducial volume is measured to be sigma(mu mu)(fid) = 34.1 +0.3(stat.)+0.7(syst.) μb. Generally good agreement is found with calculations from STARlight, which incorporate the leading-order Breit-Wheeler process with no final-state effects, albeit differences between the measurements and theoretical expectations are observed. In particular, the measured cross sections at larger vertical bar y(mu mu)vertical bar are found to be about 10-20% larger in data than in the calculations, suggesting the presence of larger fluxes of photons in the initial state. Modification of the dimuon cross sections in the presence of forward and/or backward neutron production is also studied and is found to be associated with a harder incoming photon spectrum, consistent with expectations.
|
|
|
ATLAS Collaboration(Aad, G. et al), Aparisi Pozo, J. A., Bailey, A. J., Cabrera Urban, S., Castillo, F. L., Castillo Gimenez, V., et al. (2020). CP Properties of Higgs Boson Interactions with Top Quarks in the (tt)over-barH and tH Processes Using H -> gamma gamma with the ATLAS Detector. Phys. Rev. Lett., 125(6), 061802–21pp.
Abstract: A study of the charge conjugation and parity (CP) properties of the interaction between the Higgs boson and top quarks is presented. Higgs bosons are identified via the diphoton decay channel (H -> gamma gamma), and their production in association with a top quark pair ((tt) over barH) or single top quark (tH) is studied. The analysis uses 139 fb(-1) of proton-proton collision data recorded at a center-of-mass energy off root s= 13 TeV with the ATLAS detector at the Large Hadron Collider. Assuming a CP-even coupling, the (tt) over barH process is observed with a significance of 5.2 standard deviations. The measured cross section times H -> gamma gamma branching ratio is 1.64(-0.36)(+0.38)(stat)(-0.14)(+0.17) (sys) fb, and the measured rate for (tt) over barH is 1.43(-0.31)(+0.33) (stat)(-0.15)(+0.21) (sys) times the Standard Model expectation. The tH production process is not observed and an upper limit on its rate of 12 times the Standard Model expectation is set. A CP-mixing angle greater (less) than 43 (-43)degrees is excluded at 95% confidence level.
|
|
|
ATLAS Collaboration(Aad, G. et al), Aparisi Pozo, J. A., Bailey, A. J., Cabrera Urban, S., Castillo, F. L., Castillo Gimenez, V., et al. (2020). Alignment of the ATLAS Inner Detector in Run 2. Eur. Phys. J. C, 80(12), 1194–41pp.
Abstract: The performance of the ATLAS Inner Detector alignment has been studied using pp collision data at v s = 13 TeV collected by the ATLAS experiment during Run 2 (2015-2018) of the Large Hadron Collider (LHC). The goal of the detector alignment is to determine the detector geometry as accurately as possible and correct for time-dependent movements. The Inner Detector alignment is based on the minimization of track-hit residuals in a sequence of hierarchical levels, from global mechanical assembly structures to local sensors. Subsequent levels have increasing numbers of degrees of freedom; in total there are almost 750,000. The alignment determines detector geometry on both short and long timescales, where short timescales describe movementswithin anLHCfill. The performance and possible track parameter biases originating from systematic detector deformations are evaluated. Momentum biases are studied using resonances decaying to muons or to electrons. The residual sagitta bias and momentum scale bias after alignment are reduced to less than similar to 0.1 TeV-1 and 0.9 x 10(-3), respectively. Impact parameter biases are also evaluated using tracks within jets.
|
|
|
ATLAS Collaboration(Aad, G. et al), Aparisi Pozo, J. A., Bailey, A. J., Cabrera Urban, S., Castillo, F. L., Castillo Gimenez, V., et al. (2021). Jet energy scale and resolution measured in proton-proton collisions at root s = 13 TeV with the ATLAS detector. Eur. Phys. J. C, 81(8), 689–49pp.
Abstract: Jet energy scale and resolution measurements with their associated uncertainties are reported for jets using 36-81 fb-1 of proton-proton collision data with a centre-of-mass energy of root s=13 TeV collected by the ATLAS detector at the LHC. Jets are reconstructed using two different input types: topo-clusters formed from energy deposits in calorimeter cells, as well as an algorithmic combination of charged-particle tracks with those topo-clusters, referred to as the ATLAS particle-flow reconstruction method. The anti-kt jet algorithm with radius parameter R=0.4 is the primary jet definition used for both jet types. This result presents new jet energy scale and resolution measurements in the high pile-up conditions of late LHC Run 2 as well as a full calibration of particle-flow jets in ATLAS. Jets are initially calibrated using a sequence of simulation-based corrections. Next, several in situ techniques are employed to correct for differences between data and simulation and to measure the resolution of jets. The systematic uncertainties in the jet energy scale for central jets (|eta|<1.2) vary from 1% for a wide range of high-pT jets (250<pT<2000 GeV), to 5% at very low pT (20 GeV) and 3.5% at very high pT (>2.5 TeV). The relative jet energy resolution is measured and ranges from (24 +/- 1.5)% at 20 GeV to (6 +/- 0.5)% at 300 GeV.
|
|
|
ATLAS Collaboration(Aad, G. et al), Aparisi Pozo, J. A., Bailey, A. J., Cabrera Urban, S., Cardillo, F., Castillo, F. L., et al. (2020). Observation and Measurement of Forward Proton Scattering in Association with Lepton Pairs Produced via the Photon Fusion Mechanism at ATLAS. Phys. Rev. Lett., 125(26), 261801–21pp.
Abstract: The observation of forward proton scattering in association with lepton pairs (e(+)e(-) + p or mu(+)mu(-) + p) produced via photon fusion is presented. The scattered proton is detected by the ATLAS Forward Proton spectrometer, while the leptons are reconstructed by the central ATLAS detector. Proton-proton collision data recorded in 2017 at a center-of-mass energy of root s = 13 TeV are analyzed, corresponding to an integrated luminosity of 14.6 fb(-1). A total of 57 (123) candidates in the ee + p (mu μ+ p) final state arc selected, allowing the background-only hypothesis to be rejected with a significance exceeding 5 standard deviations in each channel. Proton-tagging techniques are introduced for cross-section measurements in the fiducial detector acceptance, corresponding to sigma(ee)(+p) = 11.0 +/- 2.6(stat) 1.2(syst) +/- 0.3(lumi) and sigma(mu)(mu+)(p) = 7.2 +/- 1.6(stat) +/- 0.9(syst) 0.2(lumi) fb in the dielectron and dimuon channel, respectively.
|
|