Abstract: The ATLAS liquid argon calorimeter has been operating continuously since August 2006. At this time, only part of the calorimeter was readout, but since the beginning of 2008, all calorimeter cells have been connected to the ATLAS readout system in preparation for LHC collisions. This paper gives an overview of the liquid argon calorimeter performance measured in situ with random triggers, calibration data, cosmic muons, and LHC beam splash events. Results on the detector operation, timing performance, electronics noise, and gain stability are presented. High energy deposits from radiative cosmic muons and beam splash events allow to check the intrinsic constant term of the energy resolution. The uniformity of the electromagnetic barrel calorimeter response along eta (averaged over phi) is measured at the percent level using minimum ionizing cosmic muons. Finally, studies of electromagnetic showers from radiative muons have been used to cross-check the Monte Carlo simulation. The performance results obtained using the ATLAS readout, data acquisition, and reconstruction software indicate that the liquid argon calorimeter is well-prepared for collisions at the dawn of the LHC era.

Abstract: The distributions of event-by-event harmonic flow coefficients v (n) for n = 2- 4 are measured in = 2.76 TeV Pb + Pb collisions using the ATLAS detector at the LHC. The measurements are performed using charged particles with transverse momentum p (T) > 0.5 GeV and in the pseudorapidity range |eta| < 2.5 in a dataset of approximately 7 μb(-1) recorded in 2010. The shapes of the v (n) distributions suggest that the associated flow vectors are described by a two-dimensional Gaussian function in central collisions for v (2) and over most of the measured centrality range for v (3) and v (4). Significant deviations from this function are observed for v (2) in mid-central and peripheral collisions, and a small deviation is observed for v (3) in mid-central collisions. In order to be sensitive to these deviations, it is shown that the commonly used multi-particle cumulants, involving four particles or more, need to be measured with a precision better than a few percent. The v (n) distributions are also measured independently for charged particles with 0.5 < p (T) < 1 GeV and p (T) > 1 GeV. When these distributions are rescaled to the same mean values, the adjusted shapes are found to be nearly the same for these two p (T) ranges. The v (n) distributions are compared with the eccentricity distributions from two models for the initial collision geometry: a Glauber model and a model that includes corrections to the initial geometry due to gluon saturation effects. Both models fail to describe the experimental data consistently over most of the measured centrality range.

Abstract: The inclusive jet cross-section has been measured in proton-proton collisions at root s = 2.76 TeV in a dataset corresponding to an integrated luminosity of 0.20 pb(-1) collected with the ATLAS detector at the Large Hadron Collider in 2011. Jets are identified using the anti-k(t) algorithm with two radius parameters of 0.4 and 0.6. The inclusive jet double-differential cross-section is presented as a function of the jet transverse momentum p(T) and jet rapidity y, covering a range of 20 <= p(T) < 430 GeV and vertical bar y vertical bar < 4.4. The ratio of the cross-section to the inclusive jet cross-section measurement at root s = 7 TeV, published by the ATLAS Collaboration, is calculated as a function of both transverse momentum and the dimensionless quantity x(T) = 2p(T)/root s, in bins of jet rapidity. The systematic uncertainties on the ratios are significantly reduced due to the cancellation of correlated uncertainties in the two measurements. Results are compared to the prediction from next-to-leading order perturbative QCD calculations corrected for non-perturbative effects, and next-to-leading order Monte Carlo simulation. Furthermore, the ATLAS jet cross-section measurements at root s = 2.76 TeV and root s = 7 TeV are analysed within a framework of next-to-leading order perturbative QCD calculations to determine parton distribution functions of the proton, taking into account the correlations between the measurements.

Abstract: The integrated elliptic flow of charged particles produced in Pb+Pb collisions at root S-NN = 2.76 TeV has been measured with the ATLAS detector using data collected at the Large Hadron Collider. The anisotropy parameter, upsilon(2), was measured in the pseudorapidity range |eta| <= 2.5 with the event-plane method. In order to include tracks with very low transverse momentum p(T), thus reducing the uncertainty in upsilon(2) integrated over p(T), a 1 μb(-1) data sample recorded without a magnetic field in the tracking detectors is used. The centrality dependence of the integrated upsilon(2) is compared to other measurements obtained with higher PT thresholds. The integrated elliptic flow is weakly decreasing with |eta|. The integrated upsilon 2 transformed to the rest frame of one of the colliding nuclei is compared to the lower-energy RHIC data.

Abstract: The jet energy scale (JES) and its systematic uncertainty are determined for jetsmeasured with the ATLAS detector using proton-proton collision data with a centre-of-mass energy of root s = 7 TeV corresponding to an integrated luminosity of 4.7 fb(-1). Jets are reconstructed from energy deposits forming topological clusters of calorimeter cells using the anti-kt algorithmwith distance parameters R = 0.4 or R = 0.6, and are calibrated using MC simulations. A residual JES correction is applied to account for differences between data and MC simulations. This correction and its systematic uncertainty are estimated using a combination of in situ techniques exploiting the transverse momentum balance between a jet and a reference object such as a photon or a Z boson, for 20 <= p(T)(jet) < 1000 GeV and pseudorapidities vertical bar eta vertical bar < 4.5. The effect of multiple proton-proton interactions is corrected for, and an uncertainty is evaluated using in situ techniques. The smallest JES uncertainty of less than 1% is found in the central calorimeter region (vertical bar eta vertical bar| < 1.2) for jets with 55 = p(T)(jet) < 500 GeV. For central jets at lower p(T), the uncertainty is about 3%. A consistent JES estimate is found using measurements of the calorimeter response of single hadrons in proton-proton collisions and test-beam data, which also provide the estimate for p(T)(jet) > 1 TeV. The calibration of forward jets is derived from dijet p(T) balance measurements. The resulting uncertainty reaches its largest value of 6% for low-p(T) jets at vertical bar eta vertical bar| = 4.5. Additional JES uncertainties due to specific event topologies, such as close-by jets or selections of event samples with an enhanced content of jets originating from light quarks or gluons, are also discussed. The magnitude of these uncertainties depends on the event sample used in a given physics analysis, but typically amounts to 0.5-3%.