@Article{Vijande_etal2013,
author="Vijande, J.
and Granero, D.
and Perez-Calatayud, J.
and Ballester, F.",
title="Monte Carlo dosimetric study of the medium dose rate CSM40 source",
journal="Applied Radiation and Isotopes",
year="2013",
publisher="Pergamon-Elsevier Science Ltd",
volume="82",
pages="283--288",
optkeywords="Brachytherapy; Cs-137 seed; TG-43 based dosimetry; Monte Carlo",
abstract="The Cs-137 medium dose rate (MDR) CSM40 source model (Eckert {\&} Ziegler BEBIG, Germany) is in clinical use but no dosimetric dataset has been published. This study aims to obtain dosimetric data for the CSM40 source for its use in clinical practice as required by the American Association of Physicists in Medicine (AAPM) and the European Society for Radiotherapy and Oncology (ESTRO). Penelope2008 and Geant4 Monte Carlo codes were used to characterize this source dosimetrically. It was located in an unbounded water phantom with composition and mass density as recommended by AAPM and ESTRO. Due to the low photon energies of Cs-137, absorbed dose was approximated by collisional kerma. Additional simulations were performed to obtain the air-kerma strength, sic. Mass-energy absorption coefficients in water and air were consistently derived and used to calculate collisional kerma. Results performed with both radiation transport codes showed agreement typically within 0.05{\%}. Dose rate constant, radial dose function and anisotropy function are provided for the CSM40 and compared with published data for other commercially available Cs-137 sources. An uncertainty analysis has been performed. The data provided by this study can be used as input data and verification in the treatment planning systems. (C) 2013 Elsevier Ltd. All rights reserved.",
optnote="WOS:000328804000043",
optnote="exported from refbase (https://references.ific.uv.es/refbase/show.php?record=1678), last updated on Thu, 23 Jan 2014 11:43:54 +0000",
issn="0969-8043",
doi="10.1016/j.apradiso.2013.09.003",
opturl="https://doi.org/10.1016/j.apradiso.2013.09.003",
language="English"
}